Yesterday inventor worked fine, I made 3 new parts.But today when I wanted to put these parts together in an assembly and I try opening a new file, inventor crashes?
I still can open projects, but can't create a new project.
PS. I'm using Inventor 2014 Student Version with service pack 1 on Windows 8.1
I have a situation where a teacher in our PLTW(Project Leads The Way) who uses inventor products for sometime is not able to save a old current project or make changes to this project, then save it. What is happening is it gives a blue screen error and corrupts the file so it cannot be fixed or opened. We cannot duplicate the process with the teacher, but we can if the file is opened on another computer and it is opened also on another computer at the same time as other pc. However, the teacher states that he doesn't have it open on any other PCs in the school.
View 2 Replies View RelatedWe recently purged our part templates of unused materials and appearances because there were duplicates after our merge between our original 2012 library and 2013 library. We deleted these duplicates but retained all materials that inventor uses by default, such as the "default" material.
Creating new files causes no problems, however when opening a .STEP file Inventor immedietly crashes and exits to the desktop. We tried re-assigning the default templates that came with our install of 2013 and we can open STEP files just fine.
We tried uninstalling the latest update (Update 2 for SP1.1) but that did not change the problem.
We are using confirmed STEP files that have opened fine in the past and new STEP files that are freshly downloaded. NOTE: the same crash occurs with .SAT and .IGES files as well, however we primarliy use STEP files.
This is occuring on two seperate machines, both running Windows 7 64-Bit with i7 processors and 16 Gigabites of RAM.
I am using PDSU 2014 Ultimate. 90% of the time I go to save an assembly, Inventor crashes and comes up with an error report.
View 4 Replies View RelatedI had both Inventor 2012 and 2013 (and entire Product design suite of both program versions) installed on my Win 7 64 bit Dell Precision Laptop, all working flawlessly. On recieving a copy of 2014 I decided to uninstall Inventor 2012 which I carried out through Add/Remove programs in Windows 7. Then I tried to launch Inventor 2013 and got an 0xc0000005 system error as per attachment 1.
I then went through the entire removal process to completely remove Autodesk products to do a fresh install of Autodesk 2014. This worked out and I did everything exactly as suggested here... [URL]
Then I disabled my Avast virus checker and stopped the process via task manager.
I then did a complete fresh install by right clicking on the Setup file on the Product design Suite 2014 dongle and choosing "open as administator" which I started without any issues. The installation then stopped while installing INventor 2014 with a 1406 error as per attachment 2. I searched the registry for the file mentioned in attachment 2 and deleted it from the registry and clicked retry and the installation finished without any further errors. I then restarted my computer and launched Inventor and again I recieved the 0xc0000005 error.
I then updated Inveontor with the DL21503391 update 1 from here... [URL]
I then updated 360.
I then tried to relaunch Inventor by right clicking and choosing "run as administrator" and proceeded to get the error 0xc0000005 as per attachement 1.
Obviously uninstalling 2012 is where the system 0xc0000005 issue began. I am trying to avoid a fresh Win 7 install.
I recently updated to Inventor Professional 2014.
The problem I encounter is that Inventor crashes sometimes when I turn the realistic view mode on.
Also the rendering in realistic view mode is much slower than with Inventor 2013.
Are there some ray tracing options that I need to set up?
Was working fine yesturday, I place about 100 components, no problem.
Then suddenly I crash to desktop at least 90 percent of the time when I select "place from content center" it starts to load then, desktop.
Windows 7 Pro.
I am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
we've just migrated to the 2014 release of the inventor suite and use vault basic. With the 2014 version of inventor the program immediately crashes when attempting to open an autocad dwg. Inventor dwg files open fine. We never experienced this issue in our previous release. We only use the dwg format and because the preview is not always available it often happens that we open an autocad dwg in inventor and vice versa. Crash is reproduced on multiple maches.
View 3 Replies View RelatedInventor 2014 crashes when executing revision table edit. This started after installing windows 7 SP1(x64) and SQL server 2012 express (x64).
View 1 Replies View RelatedPublishing parts to C Center or Editing tables in C Center Crashes Inventor Prof 2014
Before i say anything let me say that this problem occured last night.Was always there as i had not used the feature before in 2014. I uninstalled ONLY Inventor from the suite and re installed. It worked !!
Tonight i was publishing new parts and then Inventor crashed. Since its crashed again i cant publish or edit part family tables to make additions etc with Inventor crashing.
I believe something has corrupted again within the Inventor 2014 install and i dont know what.
Im looking for some pointers as i dont really feel like uninstalling and reinstalling Inventor to fix it.
I have cleared the cache from users folders etc. Im guessing i need to clear some thing else as well. This crashes in both Vault and local CC files.
One of our customer has inventor 2013 and I am working with inventor 2014.
I would like to know if there is anyway for my customer once my job is done to be able to load the Sub assembly with his software and be able to work with it ?
They told me Inventor fusion is not an easy tool and would prefered to use inventor files.
I am having an odd issue with the windows default for opening files for Inventor. I previously had the full Autodesk 2013 software suite. A couple of months ago I did the upgrade and installed the Autodesk 2014 software suite.
My issue is now when attempting to open files the default is to open them in Inventor 2013 (still installed on my machine).
I went through the windows default programs options and browsed/selected the Inventor 2014 .exe application. However, this does not add the 2014 application to the list as it seems 2013 over rides it.
I tried to manually changing .ipt/.iam/.stp etc. file types from Inventor 2013 to Inventor 2014, yet am still unable to have the 2014 application added to the potential list of default programs to open with.
One solution would appear to be to un-install the 2013 suite, is there any other way to fix this problem? It is nothing crucial, yet very annoying.
another way that I can get the default program altered to use Inventor 2014? I have attached pictures showing my steps of attemping to change the file association for a .stp file. However, this does not work. I even brought this issue to my company's IT perssonnel and they were unsure.
I have a coworker who opens an Inventor 2014 (Inventor .dwg) drawing in AutoCAD Mech 2014 and only the views show. No annotations, titleblock, or border. If I open the same drawing in my AutoCAD Mech 2014, the drawing appears correct. Both have service pack 1 applied to Inventor and AutoCAD 2014...
View 7 Replies View RelatedAutodesk Inventor 2014 randomly stopped opening. This is on Windows 7 64-bit. I tried repair and reinstall. No error message is give. This issue persists across reboots.
View 1 Replies View Relatedmy laptop has been stolen and I had to buy a new PC...The new one is a windows 8, therfore, I had to install revit 2014....the problem is that I have been working on a graduate class project using revit 2012, and now revit 2014 will not open the files I built on revit 2012...I have only 10 days to rebuild what I have been working on for 3 months!!!...is there any way to open a revit 2012 on 2014 or at least convert it to work on 2014.
View 1 Replies View RelatedI work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
View 1 Replies View RelatedWhen I open a .dwg file from a saved location auto cad crashes about 35% of the way through loading. I did not have this problem when I was running Windowws XP but now I am running Windows 7.
View 6 Replies View RelatedI have an assembly, very simple with only 20 parts max. No components are 'foreign' (all created within Inventor). I had run a few analysis on it yesterday and everything was good. Today I opened up the assembly and attempted to go into the FEA and then the program crashes. No warnings or anything.
Using INV 2013 Professional . I cant attach the assembly as it is sensitive data.
I am having trouble opening an EPS file in Photoshop CS5. Previously, PS wasn't opening at all, but I cleaned up my fonts and I can now open some files. This particular EPS file, however, causes the application to crash every time. I recently had similar trouble with Firefox and Flash and have since upgraded to 10.7. Crash report below:
Process: Adobe Photoshop CS5 [1044]Path: /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5Identifier: com.adobe.PhotoshopVersion: 12.0.4 (12.0.4x20110407.r.1265] [12.0.4)Code Type: X86-64 (Native)Parent Process: launchd [238]
Date/Time: 2012-03-19 21:58:35.446 -0400OS Version: Mac OS X 10.7.3 (11D50d)Report Version: 9
Interval Since Last Report: 7245 secCrashes Since Last Report: 4Per-App Interval Since Last Report: 6379 sec
Per-App Crashes Since Last Report: 2
Anonymous UUID: DFE4BD23-8BDD-4E6D-8961-56DE2808DF87
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
[code].....
I am working on a new iMac and a few weeks ago I started to try the Photoshop CC-Tryout-Version. Everything was ok, but today Photoshop stopped opening files and crashes. The Tryout-Version is still valid - the 4 weeks haven't passed yet.
View 5 Replies View RelatedEvery time I open a file(.psd or .jpg) Photoshop automatically crashes. here is the reports:
Process: Adobe Photoshop CS4 [6330]Path: /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4Identifier: com.adobe.PhotoshopVersion: 11.0.2 [11.0.2x20100519 [20100519.r.592 2010/05/19:02:00:00 cutoff; r branch]] (11.0.2)Code Type: X86 (Native)Parent Process: launchd [161]
Date/Time: 2012-03-07 12:06:40.302 -0600OS Version: Mac OS X 10.7.3 (11D50d)Report Version: 9
Interval Since Last Report: 74765 secCrashes Since Last Report: 36Per-App Interval Since Last Report: 12711 sec
Per-App Crashes Since Last Report: 31
Anonymous UUID: A6CE95B7-8E61-4857-8194-A926A453F5C0
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
[code].....
I have a problem with my Photoshop CS 3. Everytime I try to open a file the program crashes producing the message "Photoshop.exe has detectetd a problem".
I'm runnig CS 3 on a Windows XP x64 OS. I have already installed the update to version 10.0.1.
All I could find out was, that it must have something to do with my EPSON printer driver for the EPSON Stylus Photo 2100. If I remove the driver from the system, CS 3 works without crashing.
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
OS : Windows Vista Home Basic 32bit
Corel draw x4 starts up fine, when you either pick a template, open an existing file, or click the new drawing button the mouse pointer becomes the circle and it says Processing at the bottom right corner of the screen, the status bar next to processing does not progress at all and it just stays like this until i close it. It says (not responding) in the top bar.
I have downloaded the updates from corel draw and have also un installed corel draw and re installed it and it is still the same.
Error message:
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
I've tried re-starting my computer....
Out of the blue Illustrator CC has decided to crash immediately on trying to open or create a file.I am on a 64 bit windows 7 machine.
View 10 Replies View RelatedI have tried CS5 & CS4 and when I open the program and attempt to open or save an .ai file, the program completely crashes. My system specs are as follows:
Manufacturer: DLS
Processor: AMD Athlon Dual Core Processor 5200B 2.70 GHZ
Installed Memory (RAM): 1.50 GB (1.25 GB Usable)
32 Bit Operating System
Since a day or two my PSE 8 crashes when i want to save or open a file.It just closes without a crash reporter.
View 17 Replies View RelatedAdobe Premiere CC crashes when opening a project file error 3697 have to close application with Task Manager media files open separately OK
View 1 Replies View RelatedWhenever I try to open jpeg files larger than 2MB PSP 4 crashes.
The files open fine in PSP 3