I have an assembly, very simple with only 20 parts max. No components are 'foreign' (all created within Inventor). I had run a few analysis on it yesterday and everything was good. Today I opened up the assembly and attempted to go into the FEA and then the program crashes. No warnings or anything.
Using INV 2013 Professional . I cant attach the assembly as it is sensitive data.
Yesterday inventor worked fine, I made 3 new parts.But today when I wanted to put these parts together in an assembly and I try opening a new file, inventor crashes?
I still can open projects, but can't create a new project.
PS. I'm using Inventor 2014 Student Version with service pack 1 on Windows 8.1
About three days ago Inventor 2013 started crashing whenever I tried to drag a subassembly into position. I got a message telling me to install SP1. I did this; but the crashing continues to occur. I can use assembly constraints to move my subassembly around but this is cumbersome.
View 3 Replies View RelatedWe have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
I always "Configure Default Template" on start-up, changing Measurement Units to mm and Drawing Standard to ISO. After Ok,
"the default template (standard.*) will be replaced according to your selected drawing standard or measurement unit. The original default template will be copied to Old Templates folder as backup. Do you want to overwrite?" Yes.
I have created a series of parts which i have assembled and saved on my USB. I have placed fasteners from Content Center and saved. When i change computer, and attempt to reopen my assembly files, i get a "Resolve Link" window, as seen in attachment, to which i don't know how to respond, and end up clicking "skip all", which results in assembly with unresolved components.
What are the steps i should have been taking to avoid ending up with unresolved components, assuming i cannot avoid changing computer.
in inventor VBA, is it possible to get all reference documents without opening an assembly file in inventor?
this is i am using right now,
Dim oAssyDoc As AssemblyDocument
Set oAssyDoc = oInvApp.Documents.Open(sAssyPath)
oAssyDoc.Update
Dim oAllRefParts As DocumentsEnumerator
If Check1 = True Then
Set oAllRefParts = oAssyDoc.ReferencedDocuments
Else
Set oAllRefParts = oAssyDoc.AllReferencedDocuments End If
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
if this is a setting that needs changed or is a bug of some sort but when i am in an assembly and double click on a sub assembly it highlights that sub assembly and greys out the rest of the model as expected, however if i then right click on a part and bring up the menu and click open it does nothing. It seems as though when i right click, the menu opens and it deselects the part so when i select open it does nothing as no part is selected. I can click on the item in the tree and select open.
View 9 Replies View RelatedWe recently purged our part templates of unused materials and appearances because there were duplicates after our merge between our original 2012 library and 2013 library. We deleted these duplicates but retained all materials that inventor uses by default, such as the "default" material.
Creating new files causes no problems, however when opening a .STEP file Inventor immedietly crashes and exits to the desktop. We tried re-assigning the default templates that came with our install of 2013 and we can open STEP files just fine.
We tried uninstalling the latest update (Update 2 for SP1.1) but that did not change the problem.
We are using confirmed STEP files that have opened fine in the past and new STEP files that are freshly downloaded. NOTE: the same crash occurs with .SAT and .IGES files as well, however we primarliy use STEP files.
This is occuring on two seperate machines, both running Windows 7 64-Bit with i7 processors and 16 Gigabites of RAM.
As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies View RelatedI have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
We are running LT 2010. I have one drawing that crashes Autocad while the drawing is trying to open. The drawing is about 13 Meg. The crash occurs when it gets to the regen step. The program does not continue and it is necessary to go to the Task Manager. Autocad shows as not responding. Performance shows 50 - 100% CPU usage. The task must be ended. CPU usage drops to < 10%. The recovery utilities say that everything is OK and make no difference. It is doing the same thing on another PC. About 10 Meg of the file is one block. I can open that block separately without a problem.
View 2 Replies View RelatedRscently upgraded from xp to win 8, re installed autocad 2011.
Now when I try to open a drawing from within autocad my system crashes, I get a flash of horizontal lines then two blank screens.
Tried running narrator but just get static through the speakers, I have to hit the re start button to get back in.
I can open a drawing from explorer if autocad is not allready running, autocad starts and the drawing opens with no problems. but if I try to open another drawing we crash.
I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
View 1 Replies View RelatedWhen I open a .dwg file from a saved location auto cad crashes about 35% of the way through loading. I did not have this problem when I was running Windowws XP but now I am running Windows 7.
View 6 Replies View RelatedI am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedCan I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
I have a problem with Photoshop CS4 Trial. The first time that I ever installed it it worked without a hitch, along with several other trials; Dreamweaver, Fireworks etc... Since than I have reformatted my computer due to other problems and now am running a clean install of Vista 64. Now, however, Photoshop crashes every time i try to open it. Ive tried several installs in several different directories.
There are times during a couple of the installs that the installer has had an error, "Photoshop CS4 failed to install do you want to continue?" When that happen I close the installer and delete all files pertaining to any adobe software off of my system including their registries.
Another thing that I forgot to mention was that when Photoshop loads it says "The monitor Profile "Samsung - Natural Color Pro" appears to be defective. Please rerun your monitor calibration software." Than it gives me 2 options, "Ignore Profiles" and "Use Anyway". Ive tried both options. Is this causing my problem?
Any help would be greatly appreciated. My CPU specs are as fallows:
Processor: Intel Q 6600 (overclocked to 3.0)
Memory: 4gb Corsair Dominator pc3 1800
Hard Drives: WD 150gb Raptor, WD 500gb, 2 Hitachi 1tb Darkstars
Motherboard: EVGA 790i Ultra
Graphics: 2 BFG 9800 GX2 (not in SLI)
Displays: 3 Samsung 216bw, Dell 17in generic.
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies View RelatedMy Assembly has two possible positions for my piston.
I would like to show both piston positions (top and bottom) in one drawing file; however, in different drawing views.
I have tried using LOD and Drawing View Representations, but it is my understanding that neither of these are meant to be used in this way.
I installed both the Photoshop CS 5.1 for 64 and 32 bit...I opent the 64 bit Photoshop to edit a jpg file, but when I import it or drag and drop it into the Photoshop interface, Photoshop dies , and stops working and shuts down every time I do this.
View 1 Replies View RelatedI am having trouble opening an EPS file in Photoshop CS5. Previously, PS wasn't opening at all, but I cleaned up my fonts and I can now open some files. This particular EPS file, however, causes the application to crash every time. I recently had similar trouble with Firefox and Flash and have since upgraded to 10.7. Crash report below:
Process: Adobe Photoshop CS5 [1044]Path: /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5Identifier: com.adobe.PhotoshopVersion: 12.0.4 (12.0.4x20110407.r.1265] [12.0.4)Code Type: X86-64 (Native)Parent Process: launchd [238]
Date/Time: 2012-03-19 21:58:35.446 -0400OS Version: Mac OS X 10.7.3 (11D50d)Report Version: 9
Interval Since Last Report: 7245 secCrashes Since Last Report: 4Per-App Interval Since Last Report: 6379 sec
Per-App Crashes Since Last Report: 2
Anonymous UUID: DFE4BD23-8BDD-4E6D-8961-56DE2808DF87
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
[code].....
I am working on a new iMac and a few weeks ago I started to try the Photoshop CC-Tryout-Version. Everything was ok, but today Photoshop stopped opening files and crashes. The Tryout-Version is still valid - the 4 weeks haven't passed yet.
View 5 Replies View RelatedEvery time I open a file(.psd or .jpg) Photoshop automatically crashes. here is the reports:
Process: Adobe Photoshop CS4 [6330]Path: /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4Identifier: com.adobe.PhotoshopVersion: 11.0.2 [11.0.2x20100519 [20100519.r.592 2010/05/19:02:00:00 cutoff; r branch]] (11.0.2)Code Type: X86 (Native)Parent Process: launchd [161]
Date/Time: 2012-03-07 12:06:40.302 -0600OS Version: Mac OS X 10.7.3 (11D50d)Report Version: 9
Interval Since Last Report: 74765 secCrashes Since Last Report: 36Per-App Interval Since Last Report: 12711 sec
Per-App Crashes Since Last Report: 31
Anonymous UUID: A6CE95B7-8E61-4857-8194-A926A453F5C0
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
[code].....