I sometimes am having some graphics problems. I placed a gantry into an assembly and it leaves a 'ghost' image behind. When I go under options and change from say 'smoother' to 'smooth' the problem goes away. Any way to avoid this totally?
My specs: Inventor Professional 2014, 64 bit edition, I've got an HP Z400 desktop which is a 3.2GHz Processor with 4 cores, 12 GB RAM. NVIDIA Quadro 4000 graphics card.
I never had this problem with 2012, nor 2013, same computer, same settings which I always import.
Im using Inventor 2014 SP1 on a HP Z620 with 2 CPU - 16GB Ram.
Graphic card is a AMD Firepro W7000 4GB.
When i am rotating a big assembly 500+ it doesnt lag that much, but when i have a sketch turned on at the same time, the graphic lags extremely when rotating.
I have tried all the recommended drivers and the newest drivers and nothing changes.
I tried different hardware settings in inventor (Performance, Compability, Quality) and there is no difference.
I also tried to change the graphic Card with a Nvidia GTX 660.
It rotates much better (smooth) in big Assy than my firepro but it is having the same issue when having a sketch turned on.
Since installing SP1, I have noticed "ghosting" when panning/zooming in paperspace i.e. the original image is still visible. The only solution I have found is to turn off Hardware Acceleration and then turn it back on.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design) Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD 16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I noticed that animated gif that I put into other web builders load fine, show cleanly.Yet when put into XDP6, the same graphics get a ghosting effect.In other words, after letters have cleared the screen, a remaining unintended outline remains. The graphics are clean in previews, viewing directly, using other web builders, or on other sites built with other software.
Today I visited the New Features page for X3D7 and had the same issue with the gif on that page too. (attached screenshot for reference)I am using win7/64bit, 8gb ram, hi-speed internet connection, don't have anything set in the browser and no browser "helper" that is adjusting image quality. This problem is only seen in Internet Explorer, not Firefox.Is there a setting in XDP that needs to be adjusted so this doesn't happen?
Since re-installing CS5 Master Suite a couple weeks ago and have been having an issue when using the trim function. There seems to be a 1px pixel or alpha that is distorting the trim.
Photoshop Version: Running CS5 Extended (12.0.4 #64) Hardware: macbook pro retina connected to a thunderbolt monitor. OS: OSX 10.8.2
I have a FrameGen BOM setup as desired and added the column for Mass/lbmass to get the weight. However on those rows where there are multiples of the Item QTY (2 of this, 3 of that) the Mass shows just the weight of one item rather than the combined weight...which is what I want. I tried making a custom property call WEIGHT and entering an expression, but in that selection I do have mass but not Item QTY as a selection.
In the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 16 GB RAM Dual AMD Radeon HD 6450 Running Product Design Suite 2014
We are being pushed from some of our customers to supply BIM files for Revit.I was told by our software supplier that Inventor 2014 could create Revit files, and it looks as though I can via the BIM Tab on the Ribbon. I havent used Revit or created any BIM content before and I was hoping to open another manufactures file (*.RFA) in Inventor to disect the file and how to create our own files. I can only find an import option in the OPEN dialog box for a Revit Project File (*.rvt). Is it possable to open/import a RFA files in Inventor 2014?
My production team uses the Inventor View to view drawings once they are released from engineering. Sometimes they get printed so they can send a copy to our vendors. When ever they print from Inventor View 2014 the lines that are on the Visible Layer do not print. Also the lines in the titeblock are not very dark even though the "print all colors black" has been checked. It does not matter which printer or computer is used.
I installed inventor 2014 on my laptop with windows 8.1, and export to DWG does not work. When i go to export, the options button doesnt work. when i click save, it pops up a windows and says "Problems encountered while saving the document." On my desktop with 2014 it works perfectly. I have the newest sp1.
I recently migrated to the Inventor 2014 release and immediately encountered several issues.
One that I haven't found reported on this site is the problem related with the 3D mouse (3D connexion Space Navigator). I've been working with it beautifully with R2012-2013 but now that I started working on Inventor 2014 it stalls and stops working suddenly. It's so bad that I stopped using the 3D mouse entirely.
[URL]
I uninstalled and re-installed the latest mouse drivers and checked that it's not the device malfunctioning. I also installed the Inventor update available on Autodesk site. No change...
My Autodesk Inventor Professional 2014 (witch I downloaded as beta) can not now open it's own files, but it opens other models that I did using 2013, attached is the message that shows up
Inventor 2014 LT / have run into a problem in a throw-away project I"m working on.
A simple example is to create a piece of 3x5x.125 flat bar, add a sketch giving you a bend line and bend the end of it. Now try to mirror the whole thing giving you a 3x10x.125 flat bar bent on both ends.
FWIW: My project isn't this simple - I know I can just make the FB and bend both ends ... this is an example of mirroring a bend not working.
My copy of Inventor 2014 will not remember the customizations I perform to the ribbon. I simply added the PDF command to the Drawing/Vault/ ribbon, and when I save and close properly and reopen, the customization is gone. It did remember all my custom keyboard commands, just not the ribbon command.
we've just migrated to the 2014 release of the inventor suite and use vault basic. With the 2014 version of inventor the program immediately crashes when attempting to open an autocad dwg. Inventor dwg files open fine. We never experienced this issue in our previous release. We only use the dwg format and because the preview is not always available it often happens that we open an autocad dwg in inventor and vice versa. Crash is reproduced on multiple maches.
For some reason when I start up Inventor 2014 it is preset to the centerpoint command. How do I change this to where it will not automatically do this?
The content center is completely empty on 3 different seats of Autodesk Inventor 2014. They all had the content center and it was working perfectly until a random moment and they all went empty at different times. Two of these seats were upgraded from 2013 while the other was a fresh installation. We do not use the vault and on my main computer, the items I marked as favorites are still able to be seen, but only available as custom parts each time.
There are 4 other seats here with Inventor installed and the content center is working, should I expect them all to vanish as well? How can I get it back?
When I try to run Inventor.exe it shows loading window and then it disappear and there's no response. I've tried to run it from Start->(..)->Inventor and any possible location but nothing worked. I've also tried solution with deleting C:ProgramDataAutodeskADLMCascadeInfo.cas file but this doesn't worked either. Autodesk DWG True View, ReCap and others work correctly. I use student version of Inventor 2014. It has been working previously 6 or 7 times. Same issue was with Inventor 2013 after 3 months no using.
I recently installed Inventor 2014. With Inventor 2013, I was able to do a Save Copy As on an IDW file to save it as either a DXF file or AutoCAD DWG file without any issues. In Inventor 2014, doing this produces the following dialog boxes in succession:
No DXF or DWG is produced. I tried doing this to a new, blank drawing from one of the default IDW templates and I get the same result. What can I do to fix this?
