AutoCAD Inventor :: Why Welding Beads Looks Plain In 2014
Oct 29, 2013I just tried the weldment in 2014 and welding bead looks plain, like a simple chamfer. Is there any way to make it looks more realistic like 2012?
View 7 Replies
ADVERTISEMENT
AutoCAD Inventor :: Get Welding Symbol In 2D Drawing
Feb 16, 2012I have a weldment assembly. It is a subassembly under a main assembly. In the 2D drawing of this main assembly, I tried to indicate the welding symbols for the subassembly assembly. The "Get Weld Symbol" is grey out.
How can I indicate welding symbol in the 2D drawing?
AutoCAD Inventor :: Welding / How To Glue Two Parts Together
Jan 7, 2014I have been toying with the welding aspect today and cannot figure our how to glue two parts together the way I want.
What I have is two pcs of 1.5" SQ tube (from content center) one with the face butted up against the side of the other. The weld will show on the top and bottom (straight sections) but will not fill the edges where the radius's from the tubing is (are?).
Inventor 2014.
AutoCAD Inventor :: Tapping A Welding Assembly
May 7, 2013I have a simple welding assembly: a plate and a cylinder (boss).The boss has a through-hole of 0.3125.The plate has a hole of 0.332.The boss is welded to the plate with the holes being concentric.
I tried to perform a machining operation by creating a sketch, projecting the geometry of the holes, and creating a threaded hole at the centerpoint projected.
The thread size I had selected was 3/8-16, and this is where I run into the issue. When modeled, a tapped 3/8-16 hole measured 0.307 (which I assume is the threads minor diameter). Obviously, 0.307 is smaller than the two concentric holes and Inventor is unable to create the tapped hole.
According to the tapped drill size chart found in any machinist reference, 0.312 is the required drilled hole diameter to tap a 3/8-16 hole. Am I missing something as how to create this tapped hole after welding in Inventor?
I know I could make the holes smaller on the Plate ans Boss, but then they would not accurately depict what is being made in our shop.
AutoCAD Inventor :: Make Drawings Of Different Welding Stages?
Apr 13, 2006Just about to take the first plunge in the pool of IV10 welding environment.
My question is: How do you make drawings for your different welding stages? When making my acquaintace with welding environment, I have encountered following scenarios:
I would like to make a drawing of an individual part from assembly, with preparations visible. This can be done by choosing preparations-state of a weldment assembly, followed by choosing a part from a pull down-menu. However, parts list still refers to whole assembly whereas I need only that one part. No worries, I’ll just hide those I don’t need.
Machining-stage produces a drawing where all previous weldment stages are visible as well, including preparations and weldings. Drawing used for machining the welded structure shows a lot of things that doesn’t need to be there, such as grooves. Empty grooves even, if I didn’t bother to define the actual weld beads there. I suppose this is as designed, but looking the assembly with the machinist’s eyes who would only see filled grooves, I would like the ability to choose if I want those stages to show or not. Again, parts list shows every part of an assembly. Guy who does the machining requires only the assembly level information.
I imagine that deriving the welded assembly would solve some of the issues.
AutoCAD Inventor :: Edit Fillet Weld / Way To Add Welding Symbol
Jan 8, 2013I am looking for a way to add a welding symbol to an existing fillet weld. When I am creating a fillet weld, I get a chance to create a welding symbol based on the fillet weld size.
If this is not done when the weld is created, there is no way to add this notation. I don't have the "Create Welding Symbol" checkbox when editing an existing weld. The only solution is to delete the weld and recreate it.
I am trying to link the welds in the iam with the weld notes in the idw.
AutoCAD Inventor :: 2013 / Cannot Put Welding Between A Pipe And Hole Made In Weldment
Aug 27, 2012I have this odd problem that when i want to do welds on a assembly, the machinng (holes) disappear. So i cannot put welding between a pipe and a hole made in a weldment.!
View 9 Replies View RelatedAutoCAD Inventor :: Thread Feature In Machining Environment After Welding Operation
Nov 17, 2013how can i make a thread feature in machining environment after welding operation?
View 1 Replies View RelatedAutoCAD Inventor :: Second Line Of Fields For Text Are Missing For One Half Of Welding Symbols
Jul 8, 2013The second line of fields for text are missing for one half of the welding symbols - See attached picture. my paint scrawling.
View 2 Replies View RelatedAutoCAD Inventor :: Export Information Stated In Tailing Note Box From All Welding Symbols?
Nov 15, 2013it's possible to export informations stated in "tailing note box" from all welding symbols? The reason why I'd like to do it...it's because each weld in the drawing has his own number and I'd like to be able to work with these weld numbers in MS excel. It means I'd like to be able to export all the weld numbers and also to change these weld numbers in the drawing via MS excel.
View 1 Replies View RelatedMaya :: Motion Trail Timing Beads?
Apr 10, 2011maya 2012 is not showing the timing beads of motion trail.. how could i see the timing beads..
View 3 Replies View RelatedAutoCAD Inventor :: Changing Construction Centerlines To Just Plain Centerlines?
Sep 19, 2012A couple of quick questions:
1) Once a construction centerline is placed and constrained can you switch it to just a regular centerline?
2) Can you change a regular line to a construction line?
3) Can you change a construction line to a centerline?
I guess what I am asking is can you change line types at all ones they are placed?
AutoCAD 2010 :: (2012) Disable Welding Lines Together?
Aug 1, 2013I used to work with older versions of autocad where i just draw a line and extend it by grabbing the vertexes of it. But in 2012 when i draw a line to anothers end point it welds the vertexes and if i want to move it the original line moves strangely with it.
I just want all my lines to be sepperate unless i tell it otherwise...
AutoCAD Map 3D :: Plain Objects To MAP
Jul 1, 2011I have received a DWG with plain CAD objects e.g. open polylines (defining linear water features) and closed polylines (defining land use areas) and I need to use this info in map for buffer/overlay analysis.
How do I go about preparing this data for use in MAP as described
AutoCAD 2010 :: Moving Objects To 0,0 Plain - Getting Locked Symbol
Mar 27, 2013When I try to move an object to the 0,0 plain, I get a "locked" symbol in the command line and the object does not move to the 0,0 plain. How would I be able to unlock this to move anything to the 0,0 plain.
View 7 Replies View RelatedAutoCAD Civil 3D :: Plain Text Changes Location From XRef Base To Pp Model And Paper Space
Aug 2, 2013I have text in a base dwg next to a c3d s.s. structure table. Looks fine in base dwg. In the plan/profile this is x-ref in the text is on top of c3d table text. visretain is 1, text is not annotative.
View 2 Replies View RelatedAutoCAD Inventor :: Rotating UCS In 2014
Jun 20, 2013can change your UCS direction in an Inventor Sketch?
I'm copying from MDT into an Inventor sketch and when I do so, my UCS goes in a different direction and my sketch is like out in space.
AutoCAD Inventor :: 2014 FrameGen - BOM Weights
Oct 3, 2013I have a FrameGen BOM setup as desired and added the column for Mass/lbmass to get the weight. However on those rows where there are multiples of the Item QTY (2 of this, 3 of that) the Mass shows just the weight of one item rather than the combined weight...which is what I want. I tried making a custom property call WEIGHT and entering an expression, but in that selection I do have mass but not Item QTY as a selection.
View 1 Replies View RelatedAutoCAD Inventor :: Opening IDW From 2013 In 2014?
Jun 18, 2013I am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
AutoCAD Inventor :: Cannot Open New File In 2014
Oct 24, 2013In the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
View 3 Replies View RelatedAutoCAD Inventor :: How To Export SAT Files V.6.0 From 2014
Apr 26, 2013How to export SAT files v.6.0 from 2014
View 4 Replies View RelatedAutoCAD Inventor :: 2014 - DWG Will Not Check Into Vault
May 29, 2013I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
AutoCAD Inventor :: 2014 Ghosting Graphics
Jul 30, 2013I sometimes am having some graphics problems. I placed a gantry into an assembly and it leaves a 'ghost' image behind. When I go under options and change from say 'smoother' to 'smooth' the problem goes away. Any way to avoid this totally?
My specs: Inventor Professional 2014, 64 bit edition, I've got an HP Z400 desktop which is a 3.2GHz Processor with 4 cores, 12 GB RAM. NVIDIA Quadro 4000 graphics card.
I never had this problem with 2012, nor 2013, same computer, same settings which I always import.
AutoCAD Inventor :: 2014 Library Empty
Sep 8, 2013How do I install the library inventor 2014 student version, the mine is empty.
View 1 Replies View RelatedAutoCAD Inventor :: Import Revit (RFA) To 2014?
Aug 12, 2013We are being pushed from some of our customers to supply BIM files for Revit.I was told by our software supplier that Inventor 2014 could create Revit files, and it looks as though I can via the BIM Tab on the Ribbon. I havent used Revit or created any BIM content before and I was hoping to open another manufactures file (*.RFA) in Inventor to disect the file and how to create our own files. I can only find an import option in the OPEN dialog box for a Revit Project File (*.rvt). Is it possable to open/import a RFA files in Inventor 2014?
View 4 Replies View RelatedAutoCAD Inventor :: Record Macro In 2014?
Dec 10, 2013Is it possible to Record Macro in Inventor 2014?
If yes, how can I acieve this?
If No, Is there any Add-in or other possibilities? Any Add-in available?
AutoCAD Inventor :: View 2014 Printing
Aug 9, 2013My production team uses the Inventor View to view drawings once they are released from engineering. Sometimes they get printed so they can send a copy to our vendors. When ever they print from Inventor View 2014 the lines that are on the Visible Layer do not print. Also the lines in the titeblock are not very dark even though the "print all colors black" has been checked. It does not matter which printer or computer is used.
View 3 Replies View RelatedAutoCAD Inventor :: 2014 Fails To Export To DWG On Win 8.1?
Oct 2, 2013I installed inventor 2014 on my laptop with windows 8.1, and export to DWG does not work. When i go to export, the options button doesnt work. when i click save, it pops up a windows and says "Problems encountered while saving the document." On my desktop with 2014 it works perfectly. I have the newest sp1.
View 8 Replies View RelatedAutoCAD Inventor :: 3D Mouse Not Working With 2014?
Jun 27, 2013I recently migrated to the Inventor 2014 release and immediately encountered several issues.
One that I haven't found reported on this site is the problem related with the 3D mouse (3D connexion Space Navigator). I've been working with it beautifully with R2012-2013 but now that I started working on Inventor 2014 it stalls and stops working suddenly. It's so bad that I stopped using the 3D mouse entirely.
[URL]
I uninstalled and re-installed the latest mouse drivers and checked that it's not the device malfunctioning. I also installed the Inventor update available on Autodesk site. No change...
AutoCAD Inventor :: 2014 Cannot Open Its Own File?
Apr 17, 2013My Autodesk Inventor Professional 2014 (witch I downloaded as beta) can not now open it's own files, but it opens other models that I did using 2013, attached is the message that shows up
View 1 Replies View RelatedAutoCAD Inventor :: 2014 Crashes When Saving?
Oct 10, 2013I am using PDSU 2014 Ultimate. 90% of the time I go to save an assembly, Inventor crashes and comes up with an error report.
View 4 Replies View Related