AutoCAD Inventor :: Graphics Lags When Having Sketch Turned On - 2014
Dec 3, 2013
Im using Inventor 2014 SP1 on a HP Z620 with 2 CPU - 16GB Ram.
Graphic card is a AMD Firepro W7000 4GB.
When i am rotating a big assembly 500+ it doesnt lag that much, but when i have a sketch turned on at the same time, the graphic lags extremely when rotating.
I have tried all the recommended drivers and the newest drivers and nothing changes.
I tried different hardware settings in inventor (Performance, Compability, Quality) and there is no difference.
I also tried to change the graphic Card with a Nvidia GTX 660.
It rotates much better (smooth) in big Assy than my firepro but it is having the same issue when having a sketch turned on.
View 3 Replies
ADVERTISEMENT
Oct 19, 2011
Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
View 2 Replies
View Related
Nov 10, 2013
I have this sketch created which I want to revolve it and further convert it to Metal Sheet for further unfold and obtain a flattened state in my final result. how this can be done (revolved parts) ?
View 6 Replies
View Related
Sep 11, 2013
I used object snap tracking for years.Since I upgraded to AutoCad 2014 why does object snap tracking only work with Dynamic input turned on?
Personally I do not like to work with Dynamic imput on, when I use object snap tracking with out DI turned on it doen't work right. Past versions worked fine. What do I do to get this back?
View 8 Replies
View Related
Jul 30, 2013
I sometimes am having some graphics problems. I placed a gantry into an assembly and it leaves a 'ghost' image behind. When I go under options and change from say 'smoother' to 'smooth' the problem goes away. Any way to avoid this totally?
My specs: Inventor Professional 2014, 64 bit edition, I've got an HP Z400 desktop which is a 3.2GHz Processor with 4 cores, 12 GB RAM. NVIDIA Quadro 4000 graphics card.
I never had this problem with 2012, nor 2013, same computer, same settings which I always import.
View 7 Replies
View Related
May 3, 2012
The layer is turned off but the table is still turned on!
I’m wondering how come the layer in which the table exist is turned off while the table is still turned one!
The screenshot and the file are attached.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 6 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Dec 3, 2013
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
View 2 Replies
View Related
Aug 1, 2011
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
View 9 Replies
View Related
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
May 30, 2013
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
View 8 Replies
View Related
Aug 22, 2012
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies
View Related
Mar 4, 2012
what is the difference between a sketch and a planar sketch?
View 2 Replies
View Related
Aug 16, 2012
I'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies
View Related
Apr 10, 2013
it happened suddenly. if i zoom right in and go into wireframe...it shows the text . it's able to be read when i convert to curves, but then i cant edit it.
the words are just long black rectangles.
View 2 Replies
View Related
Feb 11, 2012
I bought Photoshop CS4 about a year and a half ago and it worked on my old Macbook (10.5.8) absolutely fine. I recently upgraded to a Macbook Pro (Lion 10.7.3) and now Photoshop crashes about every ten minutes for no apparent reason. By "crashes" I mean that the spinning wait cursor appears and I am forced to use force quit as Photoshop is no longer responding.
I've tried uninstalling and reinstalling, turned off automatic graphics switching and nothing seems to work.
View 7 Replies
View Related
Aug 1, 2013
I am trying to use Autodesk Inventor 2013 with UAC turned on.
Which is fine according to
[URL]
Inventor starts and works fine until we want to use Inventor Studio to render anything. The option is greyed out, if i remove the add-on and re-add it, the options becomes available but all of the options within Inventor studio are greyed out, so it's useless to me.
This is someone else's preview but it applies to this scenario.
[URL]
I can verify that under the same profile with UAC turned off it all works.
I need to leave UAC on and I need to be able to render using Inventor Studio.
View 4 Replies
View Related
Nov 23, 2011
My fully activated CorelDRAW X4 turned to trial (0 days left) after performing a windows updating (XP x86) .
Upon launching, a window pops up "No asset found for trial download (license ID: 540228824) with 0 day(s) left, source type 1, lang en and source ID 810007 " and basic features as save, export, scripts, etc are disabled
The about window presents the information correctly of my fully activated CoreDRAW, Owner, serial, version (14.0.0.701)
View 11 Replies
View Related
Apr 9, 2012
I can't get the select other function to work. When doing a measurement, if I right click on an item, then click "select other", nothing happens. This also is the case when applying constraints. In application options, the select other timer is set to 2.0 sec., it is not set to off.
View 7 Replies
View Related
Nov 4, 2011
I am trying to turn the style library off in inventor 2012, I can't seem to be able to do this. I know in the past version I simply turned it off in the project editor, but I only have the read-write option now. All my drawing settings are saved to my Template, when i open the template, it changes to the style library settings, which I don't want.how to save my settings to style library this is why I have never used it.
View 2 Replies
View Related
Jan 31, 2012
In the drawing environment is there any way of defaulting hatch to be turned on when creating an ISO of a section?
View 1 Replies
View Related
Nov 29, 2011
Trying to do two variations of an assembly using representations. I turned sub-assemblies off in different representations by unchecking "visibility." I can switch back and forth between representations in the assemby and the sub-assemblies go on and off, but drawing views where I've selected a given representation still show the "invisible" assemblies.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 6 Replies
View Related
Mar 30, 2012
Ok I am struggling with this again. Some how when my assembly was made I had several work planes visable on several subassemblies. No big deal, I will just go to the subassemblies, turn them off and save them and all will be fixed right? Wrong, the assembly still opens with the work planes showing. So I expand the subassemblies and turn the visability off in the top level assembly. Now when I attempt to save the assembly I am told that the master view is locked and I need to create a new view. But I don't ever want all the work planes on and I don't want to create a new view because that leads to not being able to save a linked assembly or drawing if the wrong thing is open somewhere.
How do I unlock the master view to be able to save it with the planes turned off?
View 9 Replies
View Related
Oct 1, 2012
Drawing based on .ipn shows (should not show) surfaces used to trim, even their visibility are turned off.
Drawing is normal if based on .iam.
Only one part of the assembly is the problem. Other parts, also with trimming surfaces, are shown normal.
Please see images in .pdf attached.
View 2 Replies
View Related
Sep 3, 2013
about 3 days ago for some reason my cad is really slow when i have two drawings open at the same time. it lags when i am panning or zooming.
it just started randomly and the computer i am using is new and started using it about 6 months ago and it has been fine since i got it except for the past few days.
it doesn't matter what drawing file is open it lags. RAM is alot (8gigs) again this just started happening randomly. everything else is fine
i am working on AUTOCAD LT 2014
View 9 Replies
View Related
Aug 21, 2013
I finally gave in and applied the LT14 registry "fix" to correct the flashing icons, monster lags, etc...might of fixed those issues (not sure yet) but now when I tap the F8 key to toggle Ortho on/off it also toggles on the Grid (which I do not want). If I keep tapping the F8 key it cycles through turning Grid on/off and turning Ortho on/off.
F7 still works like it should, toggling the Grid on/off.
View 2 Replies
View Related
Jun 6, 2011
Whenever I place a copy or paste from the clipboard AutoCAD freezes for about 5 -8 seconds and is very annoying. Time is money people. I know it's not a RAM issue. I don't have the problem with 2011 when I go back to it. What gives Autodesk? When is the next service pack due? This only happens with teh copy command
View 9 Replies
View Related
Oct 27, 2012
I'm using a MBP (Late 2011, i7, discrete ATI Radeon 6570m) with 16 Gigs of RAM, a 256GB SSD Samsung 830 and a Wacom Intuos5 tablet. My secondary screen is a Dell U2711.Ps is already updated to 13.0.1
Everytime i use a brush tool (healing, cloning, etc.) the % of cpu usage goes up to 90-140, Temperature goes up to ~80 degrees, fans going to full power.
When i don't stop to use the brush, Ps is freezing for a few seconds (5-30).
Mostly, when i switch to another app (Firefox, etc.) and back to Ps, i can use Ps again.
View 1 Replies
View Related
Apr 21, 2012
QUESTION:
Is it possible to obtain a drawing tablet which can be taken out, away from the computer and be used like a sketch-book when out and about? Then, after coming home with this drawing tablet, connect it into the computer and upload all the sketches you've done when out?
I presently use a Wacom Bamboo which connects into my laptop, but I sometimes would like to just take the 'Bamboo' out - draw on it like an electronic sketchbook - come home and put all my sketches into the computer for further work.
View 8 Replies
View Related
Jun 30, 2012
Brush lags in Photoshop CS6 with GPU acceleration. Brush performs better with GPU Acceleration OFF, than with it on. Nvidia GTX 470
Latest nvidia drivers. Windows 7. 64bit
Edit: Installed newer Wacom drivers 6.3.2w3 which seems to have brought CS6 back to CS5s performance level after a reboot. Although brushes do still lag, especially the art brushes. Still not thrilled with performance yet.
Photoshops brushes are still faster with GPU accell off though.
View 2 Replies
View Related
