AutoCAD Inventor :: Use Autodesk 2013 With UAC Turned On
Aug 1, 2013
I am trying to use Autodesk Inventor 2013 with UAC turned on.
Which is fine according to
[URL]
Inventor starts and works fine until we want to use Inventor Studio to render anything. The option is greyed out, if i remove the add-on and re-add it, the options becomes available but all of the options within Inventor studio are greyed out, so it's useless to me.
This is someone else's preview but it applies to this scenario.
[URL]
I can verify that under the same profile with UAC turned off it all works.
I need to leave UAC on and I need to be able to render using Inventor Studio.
View 4 Replies
ADVERTISEMENT
Jun 14, 2012
I added an Axis FX to the clip on the timeline and entered the Editor. Everything looks fine. I see the clip loaded above the control parameters. The "Layer" button is turned on. Stabilizer/Track is set to Track. When i click on the Stabilizer button to enter the tracking editor, I see the tracking box on a black screen, the clip is not visible anymore.
View 2 Replies
View Related
Feb 13, 2013
I've had this issue with layers turning off randomly in the previous years; it has been fixed at some point when a service pack was installed. It is back now in Autocad 2013 and SP1 does not work.
Usually it is happening after the unisolate command. I assume that it is related with the unisolate function that does not work for all layers.
View 5 Replies
View Related
Jul 15, 2013
The dialog box for MText is turned off. How do I turn it back on so I can edit text from the editor?
View 9 Replies
View Related
Apr 30, 2012
Im trying to do an assignment with Autodesk Inventor. We use Autodesk Inventor pro 2012. For some unknown reason EVERY time i download inventor 2012 pro the installation fails due to a corrupt file. So i thought (In desperation) i would downlaod the 2013 version and see if it would install. Lucky enough it all installed correctly. So i continue with my work on the 2013 edition, and when i go to save it it tells me, that i will not be able to use this file on previous versions. (Which i need to do). Is there by any chance a way to save files, that are compatible with older versins (Like in Word) ?
View 3 Replies
View Related
May 3, 2012
The layer is turned off but the table is still turned on!
I’m wondering how come the layer in which the table exist is turned off while the table is still turned one!
The screenshot and the file are attached.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 6 Replies
View Related
Dec 6, 2012
After converting and .dgn file to autocad, the diameter symbols have turned to question marks, and some of the fractional inches turned to f. The text styles are listed as dgn003.shx which is missing? What is the best approach to fix this problem?
View 4 Replies
View Related
Jan 10, 2013
Did 2013 change the way Direct Distance Entry is handled?
Say I want to start a line a distance of 3 from another line using Otrack and a running endpoint snap. Before, I could just hover over the existing line's endpoint, move the cursor in the right direction, and enter 3 on the keyboard. Now in 2013, I need to have Dynamic Input (F12) turned on to get this behavior. 2012 was not this way.
View 9 Replies
View Related
Sep 11, 2013
I used object snap tracking for years.Since I upgraded to AutoCad 2014 why does object snap tracking only work with Dynamic input turned on?
Personally I do not like to work with Dynamic imput on, when I use object snap tracking with out DI turned on it doen't work right. Past versions worked fine. What do I do to get this back?
View 8 Replies
View Related
Apr 3, 2012
The Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 Replies
View Related
Apr 9, 2012
I can't get the select other function to work. When doing a measurement, if I right click on an item, then click "select other", nothing happens. This also is the case when applying constraints. In application options, the select other timer is set to 2.0 sec., it is not set to off.
View 7 Replies
View Related
Nov 4, 2011
I am trying to turn the style library off in inventor 2012, I can't seem to be able to do this. I know in the past version I simply turned it off in the project editor, but I only have the read-write option now. All my drawing settings are saved to my Template, when i open the template, it changes to the style library settings, which I don't want.how to save my settings to style library this is why I have never used it.
View 2 Replies
View Related
Feb 19, 2013
I want to draw hyperbola curve whose equation is x^2/a^2 - y^2/b^2=1. May I use equation curve tool to make the above hyperbola.
I have also made a hyperbola curve of aforesaid equation through conventional method on mathematical ground in the past.
View 2 Replies
View Related
Oct 19, 2011
Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
View 2 Replies
View Related
Dec 3, 2013
Im using Inventor 2014 SP1 on a HP Z620 with 2 CPU - 16GB Ram.
Graphic card is a AMD Firepro W7000 4GB.
When i am rotating a big assembly 500+ it doesnt lag that much, but when i have a sketch turned on at the same time, the graphic lags extremely when rotating.
I have tried all the recommended drivers and the newest drivers and nothing changes.
I tried different hardware settings in inventor (Performance, Compability, Quality) and there is no difference.
I also tried to change the graphic Card with a Nvidia GTX 660.
It rotates much better (smooth) in big Assy than my firepro but it is having the same issue when having a sketch turned on.
View 3 Replies
View Related
Jan 31, 2012
In the drawing environment is there any way of defaulting hatch to be turned on when creating an ISO of a section?
View 1 Replies
View Related
Nov 29, 2011
Trying to do two variations of an assembly using representations. I turned sub-assemblies off in different representations by unchecking "visibility." I can switch back and forth between representations in the assemby and the sub-assemblies go on and off, but drawing views where I've selected a given representation still show the "invisible" assemblies.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 6 Replies
View Related
Mar 30, 2012
Ok I am struggling with this again. Some how when my assembly was made I had several work planes visable on several subassemblies. No big deal, I will just go to the subassemblies, turn them off and save them and all will be fixed right? Wrong, the assembly still opens with the work planes showing. So I expand the subassemblies and turn the visability off in the top level assembly. Now when I attempt to save the assembly I am told that the master view is locked and I need to create a new view. But I don't ever want all the work planes on and I don't want to create a new view because that leads to not being able to save a linked assembly or drawing if the wrong thing is open somewhere.
How do I unlock the master view to be able to save it with the planes turned off?
View 9 Replies
View Related
Oct 1, 2012
Drawing based on .ipn shows (should not show) surfaces used to trim, even their visibility are turned off.
Drawing is normal if based on .iam.
Only one part of the assembly is the problem. Other parts, also with trimming surfaces, are shown normal.
Please see images in .pdf attached.
View 2 Replies
View Related
May 16, 2012
Just installed 2013....when trying to login to Autodesk 360 through the program I get the following error. However, I can go to the 360 website and login just fine..
View 9 Replies
View Related
Dec 19, 2013
I have the latest version of Autodesk 360 and I am using Autocad LT 2014.
There seems to be no pattern for when the Sync gets stuck, but occasionally Autodesk 360 will sync indefinitely and it causes AutoCAD to run extremely slow. Restarting the computer fixes it but it has been happening a few times every week. I have attached my ADSync.log file for review.
View 5 Replies
View Related
Dec 6, 2013
Working on Autocad 2013 Mechanical. I ALWAYS have the Autodesk 360 SignIn objects on the top bar. I have disabled the Autodesk 360 from the installation list in the network deployment. But this doesn't work. I have also modified the registry and the .ini files but it seems NOTHING works! How can I install AutoCAD in silent mode without getting these objects on the top bar?
View 4 Replies
View Related
Aug 29, 2013
In the setup.ini file look for the following line
POSTREQUISITE=ACAD_PSPACK;ADSYNC;ACADSKETCHUPIMPORT
Remove ADSYNC; from that line so you are left with:
POSTREQUISITE=ACAD_PSPACK;ACADSKETCHUPIMPORT
I do this operation. I uncheck on my deployment Autodesk 360 on AutoCAD.But when I try to install AutoCAD he still install the Autodesk 360.
When I search on my deployment folder all the setup.ini. I found 5 of them.But only 1 have the line that I change.
View 5 Replies
View Related
Aug 7, 2013
Every time i try and open Autocad 2013 when checking the licence it comes up with an error ( Autodesk component has stopped working).
View 1 Replies
View Related
Aug 5, 2012
Have been using ACA 2013 all last week (normally do most of my work with Revit) and this time its been used intensively since install. I noticed that Autdesk 360 was doing allot of syncing. Drawings are open all of the time so the syncing activity is continuous.Then I found that over the last week broadband useage generally is clocking up to 11Gb per day (I get 60 per month), other browsers were slow and I think I have traced the problem to Autodesk 360 - it stoppped as soon as I disconnected from the cloud. It seems there is a huge amount of up and down stream data - turn 360 back on and the router lights start flashing furoiously. The cloud storage is less than 1Gb.
View 1 Replies
View Related
May 24, 2012
Any registry setting (or some othere way) to disable Autodesk 360. My users have no reason to use this feature and I don't want them wasting time with it.
View 5 Replies
View Related
May 29, 2012
installed 32bit AutoCAD Map 3D 2013?
My install fails at the AML 2013 - Low Rez and I can't install Map at all.
I don't think there is an option to no install the Material Library...
Here is my log file from a few minutes ago...
2012/5/29:12:31:55 gluckett PRAGUE Installing Autodesk Material Library 2013 - Low Resolution: ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:AutodeskAutoCAD_Map_3D_2013_English_Win_32bit" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1
2012/5/29:12:32:47 gluckett PRAGUE Install Autodesk Material Library 2013 - Low Resolution Failed Installation aborted, Result=1603
View 6 Replies
View Related
Oct 28, 2013
I am using AutoCAD Mechanical 2013 and need to save a file as an AutoCAD LT 2008 for a friend to work in. I can only save it as AutoCAD LT 2004, is there a way for me to add AutoCAD LT 2008 as an option? If not is there a compatibility pack for him that he can download. There was a slight issue in the transfer. Im not doing anything that uses the mechanical features, just normal autocad features. The option for my computer is better if it is possible.
View 1 Replies
View Related
Feb 16, 2013
I just installed AutoCAD 2013 under Windows 8
AutoCAD 2013 installed as expected but I can not run the Flash based introduction movies.
I am a new to AutoCAD, have never used to program before and would like to switching the "preferences" (which I can't find) to a better browser like Google Chrome.
Suggestion for Autodesk: Please dump IE in favor or propper browsers. IE has never and will never work properly.
In conclusion: How can I get the Flash videos to work. Where do I register the software?
Because of the above issues, I've installed AutoCAD 2013 on my iMac and everything is running as expected. I am more of a Linux/OS X user and have limited experience with Microsoft products.
View 1 Replies
View Related
Jan 31, 2013
Does the 2013 subassembly composer include a way to include a condition based on LANE-OUTSIDE-SLOPE?
The figure below indicates the type of condition I would like to include (red arrows).
View 5 Replies
View Related
Oct 8, 2013
I need to change the layer that my "Produced by an Autodesk Educational Product" border is being put to. I've never had to assign it to my text layer in the past; it has always just gone there. Now it is showing up on my furniture layer and I don't know where that setting is to move it.
View 9 Replies
View Related
