AutoCAD Map 3D :: Install Of 2013 Stalls At Autodesk Material Library
May 29, 2012
installed 32bit AutoCAD Map 3D 2013?
My install fails at the AML 2013 - Low Rez and I can't install Map at all.
I don't think there is an option to no install the Material Library...
Here is my log file from a few minutes ago...
2012/5/29:12:31:55 gluckett PRAGUE Installing Autodesk Material Library 2013 - Low Resolution: ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:AutodeskAutoCAD_Map_3D_2013_English_Win_32bit" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1
2012/5/29:12:32:47 gluckett PRAGUE Install Autodesk Material Library 2013 - Low Resolution Failed Installation aborted, Result=1603
View 6 Replies
ADVERTISEMENT
Apr 26, 2011
We have recently upgraded from Inventor 2011 Routed Systems to Inventor Pro 2012. We are using XP fully updated to the lastest SP and everything. We have everything configured to our preferences but there is one thing that has been driving me batty. When editing a solid part I open the Style and Standard Editor. Down near the bottom under Realistic Appearance where there should be a ball with a shiney swatch there is a yellow triangle mocking me saying Autodesk Material Library is not available, also none of the bump maps are showing up on new or migrated files whether this is a related issue I am not sure of. All of the normal and custom textures show up just fine, and all the bump textures are in their correct folder in the correct place. I have tried switching the design data folder around with no success.
View 7 Replies
View Related
Mar 22, 2012
I had to uninstall the material library from my C drive. I have a dedicated SSD OS drive with very little extra space to spare.
Now that I need the material library again, when I try to install it, the installer still insists on using 1.2 GB on C.I've browsed for the new drive letter, and the little pop up window still shows it using no space on any other drive, and 1.2 on C.
View 2 Replies
View Related
Nov 2, 2011
teaching design and one of the programs is 3ds-Max Design 2012. One of my students couldn't find her Autodesk Material Library in the slate material window. Also in the compact material window the default materials were empty. I looked everywhere and tried to set back to the program defaults but that didn't work. So what did my student do and where in the world did the Autodesk material library go?
View 1 Replies
View Related
Sep 4, 2013
I have autocad 2013 and I used to have the material library downloaded and working fine. I recently installed revit 2014 and deleted all 2013 material library and downloaded the 2014 that came with Revit.
However, now autocad gives me an error saying the material library is not installed. Is there anyway to remap it so that it reads the 2014 library? I would rather not download the 2013 library if I don't have to, I use windows on a mac and my bootcamp partition is very tiny.
View 5 Replies
View Related
Jun 28, 2013
When a make a copy of a material library item (siding) and use the materials editor to change the color the materials do not change from the original color. What can I do to update 5the colors?
View 5 Replies
View Related
May 4, 2012
I've made my own material library containing a short list of materials from the Inventor default library. And I have set my Project ipj to use it as the default library. All works OK. But, every time I make a new project ipj I have to go find my custom library adsklib file to add it to the project. Is there a certain folder the adsklib file need to live in so that new projects will pick it up automatically?
View 2 Replies
View Related
Nov 4, 2013
how to edit or delete existing material in the library?In a part, I can rename, delete and create new materials using the Material broser.But how to transfer this modifications to library?
The only way i see is to "save styles to style library", but with this feature only the NEW created materials get saved in the library. But how to delete or modifiy materials that are already in the library?
View 1 Replies
View Related
Nov 20, 2012
I have a lot of project files to migrate from INVENTOR 2012 to 2013. So I created an VB.NET application to get and check out all project files from my VAULT, change the different paths and check in the files in the vault. However, I need to include the new material library in each project files.
I found that we could change almost everything, but not include material library.
View 2 Replies
View Related
Apr 3, 2012
The Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 Replies
View Related
Dec 6, 2013
Working on Autocad 2013 Mechanical. I ALWAYS have the Autodesk 360 SignIn objects on the top bar. I have disabled the Autodesk 360 from the installation list in the network deployment. But this doesn't work. I have also modified the registry and the .ini files but it seems NOTHING works! How can I install AutoCAD in silent mode without getting these objects on the top bar?
View 4 Replies
View Related
Aug 29, 2013
In the setup.ini file look for the following line
POSTREQUISITE=ACAD_PSPACK;ADSYNC;ACADSKETCHUPIMPORT
Remove ADSYNC; from that line so you are left with:
POSTREQUISITE=ACAD_PSPACK;ACADSKETCHUPIMPORT
I do this operation. I uncheck on my deployment Autodesk 360 on AutoCAD.But when I try to install AutoCAD he still install the Autodesk 360.
When I search on my deployment folder all the setup.ini. I found 5 of them.But only 1 have the line that I change.
View 5 Replies
View Related
Mar 12, 2013
I am in the samill building buisness. While designing I thought it would be nice to show logs on our equipment. Is there anyway to show bark on drawings to show the texture on the final drawing?
View 1 Replies
View Related
Jun 15, 2012
Can't seem to locate the Inventor Material Library....under Default in Projects, the Inventor Material Library is highlighted in Red. Where I need to browse to inorder to locate it?
View 2 Replies
View Related
Jun 12, 2012
i have an internal hard drive specifically meant for Smoke 2013.
can't seem to find the way to change the location for the installation,it keeps on installing on the main disk.is it even possible to install it in different hard drive?
View 2 Replies
View Related
Sep 11, 2012
I have a user that has created a new material which is now sitting as a local style. We require this new material in the library so that everyone can use it. I tried RMB on it but the save to library functon is greyed out. This is due to the styles being read only in the project file. So I have tried to change the project file so we can add the style and then I'd change it back again, but, even though I have checked out the project file from vault, it won't allow me to edit it. What else can be locking the project file? Is there some other way I can place the new material into the style library in the project file? There are quite a few of us that use the project file since we use vault, so I'm not sure I should create a new one with the same name and save over it.
View 3 Replies
View Related
Oct 7, 2013
I am using inventor 2012 but the material library is not loading.Then i go to the Manage> Styles Editor> and clieck on color or material it only gives me the option of defualt.
The drop down box in the top right is greyed out so i cannot change this either.
It works fine on another PC just not mine.I have downloaded the material pack from the website also.
I have also changed the hardware settings. I have tried all 3 hardware settings and it makes no differance.
Running windows 7 x64, 8 gigs of ram 3.4 quad core, 128gig SSD.
Everything is up to date.When i installed the material library download the material library was working, but when i opened a file the material library went back to how it was above.
The files i am using are from models i made in inventor 2010, but there is no problem on another PC i use.
View 5 Replies
View Related
Oct 31, 2013
I was wondering if there is a way to import or add Nitinol alloy into my Inventor material list. I need to do stress simulations and Nitinol is not included...
View 3 Replies
View Related
Oct 4, 2013
I am working in 2013 right now. My project loads two material libraries, and I am finding that if the Autodesk Material Library is selected in the dropdown, and I try to set the material to something in my Custom library, it fails. If I first select my custom library to make it the active one, then my code works fine.
So my question is, how do I set my custom library to be the active one, or better yet, so that it will look through both library's and pick the material from the library that has it.?
View 2 Replies
View Related
Jan 2, 2013
I have my own library, Inteco Material Library, created with a material 'perforatie'.
Now I have a flat part and made a sketch with another rectangle. I have used the Split tool so I create a separate area that I can select.
If I select that area and I go to my own library I can not select my own made material. I have the material in the Inventor Material Library installed but I can not select it.
View 4 Replies
View Related
Jan 29, 2013
I have recently started playing with the new materials and appearances browsers - what a nightmare.
So I created a custom library as described in the "Materials and Appearances" whitepaper from Autodesk.
Bottom left corner of material browser > create new material
> edit material: change its name, density etc
Why can I not add it to the new custom library - from document materials?I tried to drag and drop - no success.
I tried to right click > add to > xxx material library - no success.It does however let me drag and drop to the "favorites".
Inventor Professional 2014.
Windows 7 64 bit.
View 8 Replies
View Related
Jul 17, 2013
is it possible to group the material in the library?
ex: alum will have 1/8 thk flat bar etc, 2x2 alum angle...and so on.
inventor 2013
vault 2013
View 3 Replies
View Related
Feb 14, 2013
I have gone thru what appears to be the correct steps in creating a custom material library a total of 3 times.
Once I finish customizing the library while in Inventor, I add it to my project file and make it the "active" library. I test it with each of my part & assembly templates on my local machine without an issue. When I log into another work station, locate and add the new library to their project file Inventor gives me a "no materials found". So I go back to my machine to check and the library is no longer valid for me either.
I can see the library on the server, the file size is 3.6MB so it has substance. I cannot figure out what I am doing that is causing the library from locking up completely when I try to use it with another work station. Also, if any way to make my library usable again that would save me about 8 hours of work.
all of our stations use the "generic.ipj" project file.
View 4 Replies
View Related
Dec 11, 2013
i need complete piping material library for Auto CAD which included all dimensions.
View 9 Replies
View Related
Oct 22, 2013
I want to present additional information on my drawings, whether in notes or some other form depending on whether it is a part or assembly drawing. The information I want to get access to is included in the material library and comes from the material Physical tab > Information section > Source, Subclass, Type, & Name.
Is the material library information accessible this way?
View 1 Replies
View Related
Aug 16, 2012
My program is missing a few material styles from the content library, whenever I use them on a part they just stay the default color. How do I replace them without having to re download the whole program?
View 3 Replies
View Related
Oct 2, 2012
I was trying to add a new appearance to our libray this morning, got confused and started searching here and ran across an old thread of mine.
".... Note that you can have a single custom library that contains both physical materials as well as appearances, or keep them separate if you prefer...."
I had always thought that these were two seperate things. After I read this, I noticed in my .ipj that the Inventor Materials Library is listed under both Appearance and Materials.
I tried copying the "InventorMaterialLibrary.adsklib" but that did not work when I tried to add it under my materials library in the ipj.... It said "No Materials are available". HOW to go about creating a single library that contains both materials and appearances?
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 2.80ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1 (before it was pulled)
Vault 2013
View 7 Replies
View Related
Oct 11, 2013
In Inventor 2014, is it possible to export a list of all of the materials in a given material library..? As text, or into Excel, or something similar?
I have a material library in Inventor 2014 containing lots of custom defined materials. I would like to create a master list that I can give to someone who isn't using Inventor. The only property that I really need to export is the material name, e.g.' CSA G40.21-44W'.
In this case, engineering is trying to coordinate better with purchasing, by making sure that materials are specified in the same way in both departments.
View 2 Replies
View Related
Feb 12, 2013
I can’t figure out how to copy a material (outside style library) from one part to another. Or how to do it with exporting and importing the material through a styxml file.
View 6 Replies
View Related
Jun 19, 2013
When selecting a material from the dropdown list the material isn’t downloaded correctly.
I had just edited the appearance for that material, pointed it to a new bitmap, then added the appearance & material to the library. Then purged it all from the document.
Restarting Inventor results in the material being downloaded from the library correctly.
dataset
Video showing the behaviour [URL]
Factory Design Suite Premium 2014 64bit
Vault Professional 2014
Win7 Pro 64bit
View 1 Replies
View Related
Sep 7, 2012
I have copied the "Diamond Plate" from the Inventor Apperance Library to my document. Now I want to edit the texture that this style is using.
1. Where is the texture map that this style using located? When I edit the style, I can't tell what is telling it the filename. I have mundged every file on my hd that it could possible be (hoping it would cause an error), but that didnt work either. Another thing I tried was in the QAT "Duplicate as Generic", but that did not show me the texture file either.
2. Is there a way to change the angle of the texture?
View 1 Replies
View Related
