The Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 RepliesIhave windows 8 consumer preview and i installed autocad 2012 but when i open autocad 2012, ribbon dont appear, when i write the command ribbon but appear a message like this " Unhandled exception has ocurred in a component in your application. If you click continue, the application will ignore this error anda attempt to continue.
Common Languaje Runtime detected an invalid program"
In Attachment , i put the image of the problem....
I keep getting that it is loosing connection, so I never really get to download.
View 1 Replies View RelatedWorking on Autocad 2013 Mechanical. I ALWAYS have the Autodesk 360 SignIn objects on the top bar. I have disabled the Autodesk 360 from the installation list in the network deployment. But this doesn't work. I have also modified the registry and the .ini files but it seems NOTHING works! How can I install AutoCAD in silent mode without getting these objects on the top bar?
View 4 Replies View RelatedIn the setup.ini file look for the following line
POSTREQUISITE=ACAD_PSPACK;ADSYNC;ACADSKETCHUPIMPORT
Remove ADSYNC; from that line so you are left with:
POSTREQUISITE=ACAD_PSPACK;ACADSKETCHUPIMPORT
I do this operation. I uncheck on my deployment Autodesk 360 on AutoCAD.But when I try to install AutoCAD he still install the Autodesk 360.
When I search on my deployment folder all the setup.ini. I found 5 of them.But only 1 have the line that I change.
installed 32bit AutoCAD Map 3D 2013?
My install fails at the AML 2013 - Low Rez and I can't install Map at all.
I don't think there is an option to no install the Material Library...
Here is my log file from a few minutes ago...
2012/5/29:12:31:55 gluckett PRAGUE Installing Autodesk Material Library 2013 - Low Resolution: ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:AutodeskAutoCAD_Map_3D_2013_English_Win_32bit" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1
2012/5/29:12:32:47 gluckett PRAGUE Install Autodesk Material Library 2013 - Low Resolution Failed Installation aborted, Result=1603
inventor 2013 content center won't install in windows 7. Tried everything, used to work in winxp64.I work for Imaginary Menagerie Managers of Imaginary Menageries. You can't imagine how long I've been there.
View 2 Replies View RelatedI would like to see the drawing preview for the drawing in windows explorer. Just as if I have AutoCAD open and can see the preview for the drawing but I want to see this in Windows Explorer instead, if this is possible or not? windows explorer to show the big preview on right side showing only dwg file icon.
View 1 Replies View Relatedi have a drawing file which is corrupted with unknown reason , windows explorer is displaying file preview but anyway autocad is crashing when i try to open this file .recover and open file in another version solutions are not working..how can ı open my corrupted file?
View 5 Replies View Relatedi have an internal hard drive specifically meant for Smoke 2013.
can't seem to find the way to change the location for the installation,it keeps on installing on the main disk.is it even possible to install it in different hard drive?
I am facing this problem that when i give plot command and preview the window it show fonts different other than my main window. Also it prints as per the preview window and not as per the fonts present in my AutoCAD model space and layout.
View 1 Replies View RelatedWe installed autocad 2013 network license on server and able to access from client machine. However, we are unable to access license from server itself.
It is virtual server with windows 2008.
I get the following message when I try to access it from the menu.
"EditInSSA cannot be used because the optional feature is not installed on this machine"
When I look to modify a deployment I cannot find the option to add SSA.
Before I installed the Product Design Suite, Network License. I did a Clean Uninstall of all Autodesk software: Uninstalled Programs, Deleted remaining Autodesk Folders, Cleared the Registry of all things Autodesk, cleared the Windows Temp folder, and Even ran Windows Install Clean Up Program. Clean slate, start the install, type in my three redundant license server names, the suite installs without a hitch.
I reboot. I opened AutoCad Mechanical, and AutoCAd with not issues. However Inventor, Showcase, Sketchbook, 3ds Max, and Fusion will not load/open, all is the blue spinning wheel. Check the Task Manager and see the program in processes, nothing happens. Then I right click on the image, and I will get a window stating program not responding.
I checked my Environmental Variables and the ADSKFLEX_LICENSE_FLEX and FLEXLM_TIMEOUT are set correctly.
I do understand why my Autocad and Mechanical are the only software that functions out of the suite. I have done a complete uninstall and re-install and the issue still exists. Only AutoCAD will Open and function. Intentor will not open.
Machine description:
Dell Precision T3500
Intel Xeon W3530 @ 2.80 Ghz
12 gb RAM
ATI FirePro V5800
Win 7 Enterprise 64 bit
I have a strange one here. Installed 10 seats of Inventor 2013 on Win 7x64, all but 2 cannot export an AutoCAD DWG. When you go to export the file, clicking on Options does nothing. On the one I have tried a repair install, this did no0t work, I then did an uninstall/reinstall, this fixed it. On the second machine, I was hoping I could get away with copying the dwg export .nin file. This has not worked
View 1 Replies View RelatedThe Architect posted a drawing that I must print in 2012 format (she forgot to save to 2004). I have tried 6 machines in our office this morning, attempting to get True View 2013 to run. The exact same error problem that plagued my attempts to use True View 2012 are occurring. True View says .NET 4.0 isn't installed. The problem is, that it is installed and running correctly. In two of the machines I went through the repair process of .NET 4.0 to see if there was a problem. There wasn't, no change; True View still errored out before installing. Is this a problem with buggy software? Are there any other options open to me? I don't know why they stopped updating True Convert. It was far superior and not full of programming/install bugs.
View 9 Replies View RelatedAll our DWG files are stored on a network share. Files in that share are indexed by Windows Server 2008 r2, so searching in files from within Windows 7 is quite easy.
Unfortunately, the server doesn't index DWG files - it doesn't have the required filter installed. Now I can add the DWG extension, but it will use a 'Plain text filter' that's unable to look inside the DWG's. It should use the AcDwgFilter.
So: How do I get the server to index DWG's without installing AutoCAD? I.e. how to install the AcDwgFilter on the server.
Since my AutoCAD crashes when exiting 95% of the time I thought I would install service pack 1.1. I have the 64 bit version of Autodesk Product Design Suite Premium 2013 which includes AutoCAD, AutoCAD Mechanical and AutoCAD Electrical. It is a Windows 7 HP XW series workstation.
Everytime I try to install the service pack it does not install, and a dialog box pops up stating "The service pack could not be installed because the expected Autodesk product could not be located on your computer." To be certain I tried both the 64 bit and 32 bit service pack. What may be causing this? Is this possibly caused by the fact that in Autodesk Product Design Suite Premium, AutoCAD is kind of a burried inside AutoCAD Mechanical, somewhat like a sub-program of AutoCAD Mechanical.
How can I install 2014 vault basic on my synology NAS Server? I have been told by our IT Guys that it won't be able to handle the vault software. What makes the Synology Server not work with Vault?
View 1 Replies View Relatedjust got new computer with 2013acade on windows 7 os. is express tools still a separate install?
View 2 Replies View RelatedI have autocad 2013 student version installed on a MacBook Pro with OSX mountain lion, worked properly, but now I can not print anything in paper, pdf, or preview. I just try re-installing the software, creating new layout, select the printer from "Edit page setup" menu, without any results.
View 2 Replies View RelatedMy AutoCAD (2013) don't shows the preview in open dialog. I read something about edit a value in Regedit, but I don't have access to Regedit. Has other way to fix it?
View 5 Replies View RelatedI have a site drawing which has a decently high resolution satellite image underneath. When I try to plot to a pdf, the underlying satellite image doesn't show up. In the plot-preview mode it does show up, but not in the actual pdf created.
View 5 Replies View RelatedI'm trying to decide whether it is worth keeping up with the C3D releases every year. One thing I wanted to try was to see if 2014 worked any better on the key things I need, but I don't want to stuff up my 2013 installation. know if I can do a separate install safely?
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
I have 2013 on my system, and it was working fine for a few weeks, but then one day I tried to bring it up and got this error:
[URL]
and when I click on the ok button, it shuts down the CAD window again. I tried repairing teh install, and then I tried reinstalling the program. I still get the same error, no matter what.
Layers appear on the “preview” but not on there as the file opens,
In the attached screenshot, a layer is displayed but as the file opens it is not there!
I tried all the very common steps like turning on/thaw/…
And also recovery
And saving it in another file
And other…
But didn’t work
How layers are displayed in the preview while physically they are not there in the drawing as the file opens?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
While loading any dwg file in autocad 2013, the preview is wrongly showing after select some shortcut file in same dwg folder. and its not back to the dwg preview. its only happen in window 7 machines only.
View 6 Replies View RelatedI have my current install set to save the dwg down to 2010. how come the preview images are blank? its only when i save down do the images become blank. if i save in the current version the preview image is there.
View 5 Replies View RelatedMy office is launching 2013 and the one issue that is really bothering me is the selection preview variable keeps getting reset <0> and I cannot figure out what is causing it?
I like to have the selection variable set to <3> and my selection cycling set <-2> so I can hold down shift and tap space bar to visually cycle through overlapping objects but this is very difficult to do when the selection preview variable resets to none <0>.
I think the new box popup in this release is very bothersome and would like to figure this glitch out.
What is the first DWG version which includes the preview image?
View 4 Replies View RelatedI could not see the preview in the icons of the autocad documents. How can I restore?
View 6 Replies View Related