I would like to see the drawing preview for the drawing in windows explorer. Just as if I have AutoCAD open and can see the preview for the drawing but I want to see this in Windows Explorer instead, if this is possible or not? windows explorer to show the big preview on right side showing only dwg file icon.
View 1 Replies
I am using AutoCAD 2011 and am not getting my AutoCAD files thumbnail preview in windows explorer. I did reinstalled it but no use. All other programs like PDF, MS office files are showing thier preview but AutoCAD don't.
View 1 Replies View Relatedi have a drawing file which is corrupted with unknown reason , windows explorer is displaying file preview but anyway autocad is crashing when i try to open this file .recover and open file in another version solutions are not working..how can ı open my corrupted file?
View 5 Replies View RelatedWhen using the WBLOCK command, no thumbnail preview is being saved with the block for previewing in Windows Explorer. I have check the RASTERPREVIEW system variable is set to 1, but this makes no difference.
When saving files normally I do not have a problem.
Why can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies View RelatedWe can preview the DWF files in Windows Explorer with Windows XP but cannot seem to be able to with Windows 7 64.
View 7 Replies View RelatedIs there a way to set Windows Explorer viewing options so that when viewing files in Windows Explorer in the "Thumbnail view", you see the thumbnail of the PSD file rather than the generic/default PSD icon?
View 5 Replies View RelatedHow can I preview an Ai file in Windows 7 Explorer? I am able to view previews of .jpg files just fine, but no Ai, .psd, .esp, etc.
View 3 Replies View RelatedThe thumbnail preview does not show up in windows browser. We use Windows 7 prof. and Acad 2012.
View 3 Replies View RelatedI thought I had this figured out but it appears to occur somewhat randomly. Since upgrading to Windows 8 when I export files that I have imported from Canon raw .CR2 for some files it gives an error that "the file could not be written" and lists the original source .CR2 file name. It does not do it everytime but once it happens it happens everytime for that file. When exporting 10 JPG files for example only 3 of them may have this issue. The file still exports and creates the JPG file and the only issue with the exported file appears to be that it did not create the preview thumbnail.
I have tried importing the files into new catalogs, writing to different folders etc but it still happens.
When I click on File>Open The dialog box no longer has a thumnail preview. Only a small grey box hovering on the right that says "Initial View" with a check box. I have attached a snapshot of my Autocad File> open dialog box so you can see what I'm getting on my end.
If I browse for files in windows explorer and change view option to thumbnail I can see the thumbnails just fine.
I've tried everything but I cannot get back my File> Open thumbnail preview.
In Tools> Options I have the thumbnail preview settings all set to save thumbnail preview image. Nothing has changed that I know if for the thumbnail preview to go away.
It's really slowing me down not being able to have thumbnail preview in the file> open dialog box.
I have a problem with previewing of new files I made in INV2013. Old files are OK. I can not find the cause...I also found, that some new files are correct and other incorrect, all made in INV 2013.
There are two types of error:
1) when I pick the file I want to open, in left lower corner - thumbnail window- is displayed text:"preview not available"
2) when I pick the file I want to open, the left lower corner - thumbnail window- is black
In iProperties panel I have checked "Save preview picture"
There are four of us in our office who all installed Autodesk Product Design Suite Premium 2013. One of us cannot see thumbnail previews in the file open dialog box or in the preview area of Windows explorer. She's using Windows 7, 64-bit.
View 9 Replies View RelatedThe Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 Replies View RelatedI am facing this problem that when i give plot command and preview the window it show fonts different other than my main window. Also it prints as per the preview window and not as per the fonts present in my AutoCAD model space and layout.
View 1 Replies View RelatedAny way to save the drawing and not lose the thumbnail preview.
View 9 Replies View RelatedI have exported a set of IV drawings to DWF format for compatibility in Design Review 2013. It would be nice to be able to preview these DWF files before opening in Design Review as thumbnails similar to thumbnail previews for ACAD drawings.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have is that after so long thumbnails in windows explorer stop loading just shows generic Autodesk image(.ipt, .iam, .stp, .idw, .dwg ect.). Causing me to be unsure on which file I'm actually opening. Causing me to have to restart the computer.
What is weird is you are able to see the thumbnails in the thumbnail of the parent folder but when you open the folder they aren't shown. If you open up properties it shows a thumbnail.
Closing and opening a new window doesn't fix this error.This was an issue I had experienced with 2011 and am still experiencing with 2013.
We have a problem with long (like 10 minute) saves.
If we go to Tools / Options / Open and Save / Thumbnail Preview Settings, in the "Sheets and Views" panel, the "Performance-Accuracy Slider" is set all the way to the right, which the Information Panel lists as "Update thumbnails when saving drawing".
If we manually slide it to the center, listed in the Information Panel as "Update thumbnails when accessed", the Save times become less than a minute.
This setting is not saved and we need to reset it each time each drawing is opened.
There has to be a setting because MY STATION did not have this problem with ANY drawing until our Supplier's Support Team got onto my computer yesterday. NOW it's a problem on my computer also.
Setting the UPDATETHUMBNAIL to "0" works, but then we have no Previews.
Setting the UPDATETHUMBNAIL to "1" does not work.
How would I go about editing drawing properties (Title, Author & custom props) without using AutoCAD. I need to replicate within VB.NET the windows explorer RMB > Properties capability.
I have heard mention of DWGProps.dll but cannot find it anywhere.
Any way to display the inventor iproperties in windows explorer or in the inventor open dialogue box? This would be useful for us in a lot of situations. If there isn't an inventor trick, maybe a windows trick?
View 9 Replies View RelatedHow to access the raster preview image stored in the dwg from a C# .NET 2.0 program?
View 9 Replies View RelatedWe are running Autocad 2012 (64 bit) on Windows 7. how to get Windows Explorer to search for text inside of DWG files?
View 9 Replies View RelatedWe would like to enforce that our designers save all Inventor files by the Part number only. This is not a problem when using Vault to open files as the interface can be customized to show the iProperty description field. The problem comes in for users who open files from the local drive before they have been added to Vault. There is no way for them to see the iProperty descrition for the files except if they hover over each file and wait for the tooltip to show which then shows a number of iProperties.
I found that I can add a Windows description column but by default it is blank. Is there anyway to get the iProperty description to synchronize with the windows description column?
When I search in content explorer it work just fine but when I click on a drawing to open it acts like its opening but right at the end it says Error Decrypting Data and wont open I've tried to look for a solution and I cant find anything.
View 6 Replies View RelatedI have multiple computers in my department that just received multiple Microsoft updates, a service pack update to Windows 7 and an upgrade to Internet Explorer 9. When they restarted and browsed in Windows explorer, all the Autodesk icons have been replaced by a generic icon. We tried to reset by re-establshing the file association and that did not work.
How do we rebuild the Autodesk icon cache on these machines?
Back in the day, there was an application that showed the drawing version # in the icon in windows explorer. That was good for then, because of the lack of object data in many of the vertices. The link I have isn't valid anymore and it didn't work in Win7.
What I'd like to have is something that will show the different Acad versions related to the icon using the product ID, for example:
ACAD-5xxx = 2007
ACAD-6xxx = 2008
ACAD-7xxx = 2009
ACAD-8xxx = 2010
ACAD-9xxx = 2011
then in 2012 they changed to Axxx
2013 = Bxxx (???) I dont' have 2013 loaded
2014 = Dxxx (what happened to Cxxx?)
With the lack of backward compatibility between versions for objects (and I totally get that), it would be nice to be able to tell by an icon which version was used to create the drawing. I know the version information is stored in the header, which can be read, I'm just not a programmer.
Goal: using the native windows explorer, Open the folder containing the the multitude of drawings from different vendors and customers, usually 30 -40 .dwg files.
Highlight all the files, Right click print.behind the scenes without any further clicking or involvement from the user autocad plots the extents of model space of all the drawings to a designated plotter fit to 11x17 sheets.
Acad 2012
Win 7
We are using AutoCAD Architecture 2013 on machines running Windows 7. When multiple AutoCAD drawings are open on most machines in the office the icon in the Windows Toolbar shows multiple stacked AutoCAD images, and when you hover over those icons, all of the open drawings appear in thumbnail across the bottom. (This is a very nice feature!)
Unfortunately one machine in the office is not doing that with AutoCAD. That machine will show multiple icons and thumbnail previews for PDFs, Word files, etc., but not AutoCAD. Is there a setting that can be changed to make the thumbnail drawings for ALL open drawings appear when hovering over the icon in the Windows Toolbar? (That computer will show a thumbnail preview of the active drawing, but not all open drawings.)
there, after the upgrade to 3d max 2012, we have a problem. The Thumbnail view on Explore is little strange.
See the attachments before and after.
I recently upgraded from CS5 to the latest version and I'm having trouble adjusting. One of the smallest but most usable features of previous versions of photoshop has been that when I go to File > open and browse to one of my thousands of image folders Photoshop will display a small thumbnail of whichever image I have selected.
This is essential so that I can tell which images I need rather than by file name which is useless.I'm probably just being thick and just need to find where to switch on the thumbnail preview.
