i have an internal hard drive specifically meant for Smoke 2013.
can't seem to find the way to change the location for the installation,it keeps on installing on the main disk.is it even possible to install it in different hard drive?
While changing the media drive in Smoke setup via commenting out the current drive isn't a complicated process, I personally would find a more streamlined option useful. Something on the startup screen would be great: select project, user, media drive. When using FW800 drives, I typically try to have a discreet project drive that has everything on there for the current project. With the larger Thunderbolt raids, I am going back a little to the old system of having active storage and archive storage. However, when thunderbolt prices come down, I'll most likely have a separate drive for each project again.
View 1 Replies View RelatedI have Smoke (same version) running on two seperate Macs. Each Mac has an external thunderbolt drive for the media storage.
I worked on my project at home on Mac #1, and assumed I could bring in my external drive and use it with Mac #2.
When I try to add my drive from home to Mac #2, it creates ManagedFolder1. Which of course doesn't have my project in it- my project is on ManagedFolder0.
I suppose this may be caused by the fact I already have a ManagedFolder0 on a different external drive for this Mac, right? So I removed that drive, assuming I could then re-add the drive from home and allow access to the 2nd ManagedFolder0 with my project.
It just shows my old projects from the other drive still, but everything is broken inside of them. This makes sense as the drive is disconnected.
how to install mediastorage in a server? smoke can t see my "server drive".
View 2 Replies View RelatedI'm wanting to work on my laptop at home, and my machine at work. I have an external tunderbold SSD array that I want to use. How would I set smoke to save projects to the external drive? Whats the best work flow for this?
View 3 Replies View RelatedIs possible to change the default configuration of the wiretap server after install?I need to make it work on another port than 80.
View 1 Replies View RelatedThe Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 Replies View RelatedWorking on Autocad 2013 Mechanical. I ALWAYS have the Autodesk 360 SignIn objects on the top bar. I have disabled the Autodesk 360 from the installation list in the network deployment. But this doesn't work. I have also modified the registry and the .ini files but it seems NOTHING works! How can I install AutoCAD in silent mode without getting these objects on the top bar?
View 4 Replies View RelatedIn the setup.ini file look for the following line
POSTREQUISITE=ACAD_PSPACK;ADSYNC;ACADSKETCHUPIMPORT
Remove ADSYNC; from that line so you are left with:
POSTREQUISITE=ACAD_PSPACK;ACADSKETCHUPIMPORT
I do this operation. I uncheck on my deployment Autodesk 360 on AutoCAD.But when I try to install AutoCAD he still install the Autodesk 360.
When I search on my deployment folder all the setup.ini. I found 5 of them.But only 1 have the line that I change.
installed 32bit AutoCAD Map 3D 2013?
My install fails at the AML 2013 - Low Rez and I can't install Map at all.
I don't think there is an option to no install the Material Library...
Here is my log file from a few minutes ago...
2012/5/29:12:31:55 gluckett PRAGUE Installing Autodesk Material Library 2013 - Low Resolution: ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:AutodeskAutoCAD_Map_3D_2013_English_Win_32bit" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1
2012/5/29:12:32:47 gluckett PRAGUE Install Autodesk Material Library 2013 - Low Resolution Failed Installation aborted, Result=1603
I have try everything I can think of but Smoke 2013 won't export any clip and when i was able to export 1 it wouldn't play. Iwas able to export on Smoke 2012 demo with no problems.
View 3 Replies View Relatedcompatibility between AJA T-Tap with Smoke 2013?
View 4 Replies View RelatedHow do I back up the Smoke 2013 pr4?
View 4 Replies View RelatedThere is no custom transition in Smoke 2013.
I try to do so by creating an axis transition and match the contents.
It just matched the whole clip with wrong in and out point.Then I try to swap something with the transition.It said two targets of the same type is required.
Does the Swap Effects work for transitions?
It is pretty simple and smooth in Smoke 2012.
I'm running the trial version of Smoke 2013 (latest version) on a Mac Pro. Going out a Kona Card. SDI out works fine, but I'm not getting a signal out of the HDMI? (I know the cable is good, Final Cut works fine...).
View 3 Replies View Relatedwould like to know how can we get a master keyer in action ?
View 9 Replies View RelatedI am trying to use stabilizer to smooth out a camera motion but immediately getting into problem with using stabilizer as I could not find any comprehensive manual on utilizing this feature.
I have one problematic very important clip with the uneven camera motion: camera moves at a certain rate and suddenly drops or increases in speed. It is around 5 min clip and involves some long panning with uneven rate of camera motion.
It is not shaky as the camera was on a tripod all right just the operator was a little bit drunk and spoiled the hole shot.
Anyway I spliced (cut) the lengthy clip into several segments where I could be able to find a distinguished feature to apply a tracker.
Then I applied an Axis FX through a timeline FX. In the "Axis" main menu I chose "Stabilizer". But in the Stabilizer Menu in the preview window I cannot see my video frames and there are boxes of tracker on the black background. How can I apply tracker if there is no footage seen in the window?
I can't start smoke neither 2013 nor 2012.
The Console get me this message:
Jun 03 10:16:12 : WARNING: Unable to run with vref
Jun 03 10:16:12 : Effective User ID not 0 (root) !
Jun 03 10:16:12 : Aborting....
Jun 03 10:16:12 : Effective User ID not 0 (root) !
Jun 03 10:16:12 : Aborting....
Jun 03 10:16:12 :
Now that Smoke 2013 PR3 has conforming tools again, I'd like to run the following questions by you before I look at producing more training videos on conforming for the Smoke Learning Channel.
In the legacy Smoke 2012 videos, I showed a workflow for working with RED R3D using Final Cut Pro 7 and QT proxies going to Smoke 2012 using the original R3D media. Would you still consider this valid and should I do the same again ?
There are quite a few variations and you already know so I am interested in your workflows so that I can make videos addressing them and the questions that will come up during this process.
[URL]
I know in the smoke 2012 on OS X you were able to set your keys as Flame. Is this possible in Smoke 2013 beta 5 ?
Also, when in connect FX can you make a hotkey for pan and zoom ? Seems silly that you would have to change that manually every time but I am sure it is user error.
how LUT storage should work with Smoke 2013, but I think I'm seeing a bug.
I'm loading a LUT, able to using it as a monitor LUT and apply it to a clip, but when I reload the project, it loses the LUT path and I have to reload it. I've tried storing it on a network, and locally in the discreet folder. Is this a bug.
I was under the impression 2013 worked natively with AVCHD. I have footage from both a Sony FS100 & 700 and unless I'm missing something I'm coming up empty.
The file structure starts with: AVF_Info & Private
Private navigates to BDMV which navigates to :
Clip Info
Playlist
stream
Of those three selections only stream seems to want to do something but when you select it says it's "loading" but nothing happens...I let it sit for 15 minutes and nothing.
working with AVCHD in 2013? or what am I missing?
Whenever we try to import video clips they show up as all black. The length of the video is there, so it might be 15 minutes of black. But no matter what video (Sony, Red, etc.) it's all the same.
We're running pre-release 3 on the latest iMac. As far as we know the graphics card is compatible.
I was rendering something with smoke 2013 and I realized that is not using the full processor speed. In the activity monitor showed only 35% of the CPU speed (4 cores) were used while rendering. Is that normal?
(as an ex. I've tested my iMac 3.4 I7 with "lightwave 11" and the software succefully used 100 % of the Processor speed (8 cores) while rendering.)
Would that be corrected or is the way that Smoke used the resources available?
know if there is a keyboard with FCP shortcuts available to buy for Mac, or a set of stickers?
View 9 Replies View RelatedIs there a match frame function for Smoke on Mac 2013 ?
View 5 Replies View RelatedFirst: I ordered the Smoke 2013 (floating-)licence through a german reseller a week ago and I still got no answer. Is this a normal "new years eve" delay?
Second: The Smoke installation is on a computer that's OS was actually cloned from another computer. The HostName, LocalHostName and ComputerName were changed, but Backburner still insists in using the "original" name given at the OS-Installation. So if the other "clone-computer" is running, Backburner gets in trouble and is stuck on waiting. During the troubleshooting process I turned on websharing to access [URL] ..... This led to the result, that anytime i restart the machine the computername is changed to 0.0.0.0 and the backburner wount work. No way, yet, to bring this back to normal.
Third: Waiting for the smoke-licence I already begun working on the project. Now it seems that I'll have to do a clean install of the system to get it finally running. But I do not want to loose the work so far. Is there a way to bring the actual project back into an new installation of OS/Smoke without having to archive it which does not work at the moment?
I have one of the Promise R6 drive arrays that has failed on me but fortunately it hung in there long enough for me to back up all my data. My questions is once my new array shows up can I copy all the data onto the new drive with all the same folder hierarchy and will it all work fine with smoke again as if nothing changed?
View 3 Replies View RelatedI'm currently running Smoke 2011 on a Mac Pro and we are feeding a Professional Grade 58" Panasonic Plasma equipped with HDMI and Component connections. We are unfortunately limited to using only the HDMI connection because Smoke 2011 doesn't support component out. Using the HDMI connection means we're limited to a 60Hz refresh rate which, generates flickering cross fades, and strobing with fast moving video. The component connections allow us to utilize a 100Hz refresh rate which eliminates these issues. After a little research, I have learned that Panasonic does not make a professional grade plasma monitor that supports higher than 60Hz through HDMI.
View 1 Replies View RelatedWhat's is the best way to share projects and media between two 2013 Smokes?
View 9 Replies View RelatedDoes large timeline view exist in smoke 2013?
(as does in Flame timeline)