I have 2013 on my system, and it was working fine for a few weeks, but then one day I tried to bring it up and got this error:
[URL]
and when I click on the ok button, it shuts down the CAD window again. I tried repairing teh install, and then I tried reinstalling the program. I still get the same error, no matter what.
Reference Manager crashing when starting.
Error message states: AutoCAD component has stopped working.
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
Now that we have switched most of our users over to 2013, we are receiving this error - only randomly, not on most drawings - but until it is resolved, we cannot batch plot, publish, because it dumps the plot. Here's a clip of the error we're receiving. When I run a Recover, it doesn't resolve the issue.
View 6 Replies View RelatedWhen AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies View RelatedI get an error every time I open any drawing after it has been saved in 2013. Opening a dwg that was created in an earlier version does not give the error, but after I save it in 2013, it does.
If I create a new dwg in 2013, save it, close it and then open it I don't get the error the first time. But then if I save that dwg again, I will get it the next time I open it.
The exact error is:
One error was found in the drawing file during open. Would you like to cancel this open?It is recommended you cancel the open and run the RECOVER command on the drawing file.
I run the recover command. It says it found, fixed, and erased 1 error. I save, close, and reopen the drawing and the error still appears every time.
Environment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies View RelatedAutodesk Inventor 2014 randomly stopped opening. This is on Windows 7 64-bit. I tried repair and reinstall. No error message is give. This issue persists across reboots.
View 1 Replies View RelatedRoller Chain accelerator give fault value? For example, I have a basic chain setup with 180SP40 and 180SP15 (both are existing sprockets). After choosing the correct chain style from the table and start choosing the existing sprockets (OD of the tooth), tt gave me a fault output and recognize the 180SP40 as a 42 tooth sprocket and 180SP15 as a 17 tooth sprocket
View 1 Replies View RelatedI am on a mac running the latest OS and i had to take it in to the shop. It got the logic board fixed and when I got it back I can no longer drag and drop files into Photoshop to open them.
It opens photoshop but will not open the pic. The only way I can open the pic is if i go under the menu and select open. Even when I right click on a pic and "open with photoshop" it only runs the program and not opens the file.
Anyone got any ideas how to fix this?
The Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 Replies View RelatedI have Win 7 and my PS CS 6 worked fine for months but now has stopped opening any files or creating new ones. Instead it just freezes without any errors warnings. I do have CS5 PS still installed and it still works fine. All other CS6 programs work fine also. I tried uninstalling and reinstalled and I still got the same problem.
View 1 Replies View RelatedAfter working for a few weeks, Camera Raw has stopped opening Canon 5D Mark II files. Says it is not a readable file format but I know the files are not corrupt because they will open in the Canon utility.
View 5 Replies View RelatedI keep getting that it is loosing connection, so I never really get to download.
View 1 Replies View RelatedI have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedI have encountered a bit of an issue. i have used my CS4 photoshop for years now on my original administrator account which is the account I installed it on but now when i try to open it I get the splash screen and it starts to load and then where it should fully open it just goes away?? I can log in to any other account on my computer and it opens just fine. have to sign out go to another user account edit then log out and then back in to my normal admin account
View 15 Replies View RelatedI noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am unable to open my program. It froze yesterday while I was editing a film - now I can't get it to open. Premiere 11.
View 2 Replies View RelatedMy pse10 organizer just stopped opening. crashed.Have been working with organizer for years.
View 3 Replies View RelatedWe installed autocad 2013 network license on server and able to access from client machine. However, we are unable to access license from server itself.
It is virtual server with windows 2008.
I am operating 3D Civil with Windows 7, 64-bit system.
Most of the time when I close a drawing, particularly when I have two or more drawings open, the program closes down with the following message "Autocad Application has stopped working - Windows is collecting more information about the problem"
I then have to restart 3D Civil
error message:"Display driver stopped responding and has recovered" Display driver Intel Graphics Accelerator Drivers for Windows 7(R) stopped responding and has successfully recovered.
This happens when I copy and paste a group of blocks. The screen goes black for 2-3 seocnds then finally recovers.
I have LR4 and PS CS5. Edited several photos this morning without a problem --But this evening, after editing in LR, clicked command+E to open in Photoshop- as I always do, but didn't get the dialog that gives me the option to edit with LR changes. The files are opening as raw instead of TIFF all of a sudden! I have done nothing different aside from updating the Kubota dashboard.
I deleted the Kubota plug-in since that was the only thing I did out of the ordinary but still no luck. I am deserate to get images edited in LR transferred to PS WITH THE EDITS! Why would it work one minute and not the next?
Just tried to edit in Color Efex from Lightroom and got the dialogue. So...it's only happening with Photoshop. I tried uninstalling Photoshop and reinstalling with updated Camera Raw 6.7 plugin. No luck....
Let me know the solution for Getting "AutoCAD LT has Stopped working" while attempt to print in HP Laserjet M1536 dnf MFP Printer. I have tried the following steps but still i am getting the same Error.
1.Graphics Driver has been updated.
2.Printer Driver has been completely removed and reinstalled.
3.New configuration for this printer has been added.
4. AutoCAD LT 2013 Service Pack 1.1 has been installed.
System configuration: Win 7 -64 bit,4 GB ram, Intel-i3 2120 processor, Intel(R) HD Graphics.
All of a sudden I got this window when starting AutoCAD:"AutoCAD Application has Stopped working..A problem caused the program to stop working correctly.Windows will close the program and notify you if a solution is available."
I'm using v2013 on a desktop with Windows 8..I have been using the program since I got this new system in November without a hitch On sunday I had a nasty virus -Today I had to uninstalled AutoCAD and re-installed it and it worked good.After I closed it and went to open the application again I got the MESSAGE again
CS5 had an option in Preferences of choosing type sample: "huge". This appears to be missing from CS6 - or is the option somewhere else?
View 6 Replies View RelatedEvery time i try and open Autocad 2013 when checking the licence it comes up with an error ( Autodesk component has stopped working).
View 1 Replies View RelatedGetting an "AutoCAD stopped working" message then system crash while working in AutoCAD Civil 3D 2013.
View 2 Replies View Relatedi have downloaded Photoshop 6.0 but I can't work with it because the program is stopped with an error
View 1 Replies View Related have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.