AutoCAD Inventor :: Autodesk 2013 Compatibility Mode?
Apr 30, 2012
Im trying to do an assignment with Autodesk Inventor. We use Autodesk Inventor pro 2012. For some unknown reason EVERY time i download inventor 2012 pro the installation fails due to a corrupt file. So i thought (In desperation) i would downlaod the 2013 version and see if it would install. Lucky enough it all installed correctly. So i continue with my work on the 2013 edition, and when i go to save it it tells me, that i will not be able to use this file on previous versions. (Which i need to do). Is there by any chance a way to save files, that are compatible with older versins (Like in Word) ?
View 3 Replies
ADVERTISEMENT
Jun 13, 2012
Where is the setting to enable Single Drawing Compatibility Mode in 2013? It used to be under the system tab in the options and is not there in 2013. Is this option still available?
I want to open multiple drawings in the same AutoCAD window by double clicking a dwg file like I have always done. Is this still possible in 2013?
View 3 Replies
View Related
Mar 11, 2013
compatibility between AJA T-Tap with Smoke 2013?
View 4 Replies
View Related
Nov 12, 2013
Is there a service pack in the pipeline that will allow Inventor 2013 to run on Windows 8.1? It was working fine on 8 but crashes on the loading screen now Ive upgraded to 8.1. Upgrading to 2014 is not an option for me as my professor uses 2013 software and he will not be able to open 2014 files.
View 1 Replies
View Related
May 2, 2013
When saving a psd file I can no longer save in "compatibility mode". I'm using a Mac computer with OSX (version 10.8.3) and Photoshop CS6 (version 13.1.2 x64). I just noticed this problem tonight when I tried to bring a psd file into a MUSE project. Now whenever I save a PSD file the menu that asks if I want to save in compatibility mode doesn't appear (it just saves the file). I've reset the preferences and restarted my computer but Photoshop still doesn't give me a compatibility mode option when saving a PSD file.
View 4 Replies
View Related
Aug 10, 2011
Does smoke have a compatibility with trapcode?
View 1 Replies
View Related
Dec 26, 2012
What is the latest SAT version ac2013 should be compatible with?
View 4 Replies
View Related
Mar 14, 2013
“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
View 9 Replies
View Related
Jun 9, 2013
Cannot inspect, export pictures, constraint while in half section (or other) view mode...
View 6 Replies
View Related
Sep 4, 2012
I opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)
View 9 Replies
View Related
Aug 1, 2013
I am trying to use Autodesk Inventor 2013 with UAC turned on.
Which is fine according to
[URL]
Inventor starts and works fine until we want to use Inventor Studio to render anything. The option is greyed out, if i remove the add-on and re-add it, the options becomes available but all of the options within Inventor studio are greyed out, so it's useless to me.
This is someone else's preview but it applies to this scenario.
[URL]
I can verify that under the same profile with UAC turned off it all works.
I need to leave UAC on and I need to be able to render using Inventor Studio.
View 4 Replies
View Related
Apr 16, 2012
We're teaming up with an Architectual firm on a project. They use Revit 2013, we use Civil 3d 2011. They will have to save back for us. Will we be able to incorporate their dwg's into our dwg's and vice versa. If so, will the 2 be compatible with any issues?
View 2 Replies
View Related
Dec 10, 2013
Our company is planning to buy new workstations Dell Precision T1700 [URL] and we have question about compatibility with Inventor 2009: Will there be issues with drivers or directx etc. that don´t match with Inventor 2009 ?
View 5 Replies
View Related
Nov 10, 2011
I´ve started at a school which is using autodesk inventor 2010, but on my computer I have autodesk inventor 2012, and I can´t find the way to open the homework I do at home on the school computers.
It is supossed that my inventor 2012 saves the files in 2010 format as I can read on the settings, but when I open it on the 2010 in shows me an error message about that it´s not possible open this file. Also I´ve tried to save as 2007 format, but it can´t open it.
View 9 Replies
View Related
Sep 12, 2013
I am looking for any example to create an addin compatible between versions of inventor and also compatible win between 32 and 64bit.
Today I know create all separate. Thereby generating 4 different files.
Example:
Addin2013_32x.dll
Addin2013_64x.dll
Addin2014_32x.dll
Addin2014_64x.dll
View 2 Replies
View Related
Sep 27, 2012
We currently use a Gestetner 3227 B/W printer as a system printer and have experienced consistent print problems while plotting CAD drawings. We now have the opportunity to try to avoid print problems with a new printer.
We currently have Autodesk Inventor 2011 software (but only use the Mechanical Desktop feature for 2D & 3D), a Widows XP operating system and print to 8-1/2 x 11 and 11x17 papers only.
1) Does Autodesk have a list of recommended or compatible "Printers" that I can be directed to?
2) Is there a specific question, feature or requirement that the office manager should ask about the printer to assure compatibility?
So far, when asked if the printers are Autocad compatible, the vendors claim that their printers "should be compatible" or that they need further details about the autodesk product without being able to specify the type of details they require.
View 1 Replies
View Related
Jun 26, 2012
I'm running into a file conversion issue at work. I use Inventor 2008 and i need to have my assembly miodels analyzed by stress engineering via Pro/E Wildfire.
I've tried converting the assembly file to .iges and .step. However, the assemblies are jumbled in the conversion. All the parts are there, but the constraints are not. In the past, the assemblies have been small enough that the stress engineer was able to reassemble the parts in Pro/E. This current project, however, is much to large to do so.
If I were to purchase Inventor 2013, could I save the files with the Pro/E native file extensions directly?
View 6 Replies
View Related
Apr 3, 2012
The Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 Replies
View Related
Feb 19, 2013
I want to draw hyperbola curve whose equation is x^2/a^2 - y^2/b^2=1. May I use equation curve tool to make the above hyperbola.
I have also made a hyperbola curve of aforesaid equation through conventional method on mathematical ground in the past.
View 2 Replies
View Related
Oct 7, 2012
Is there a way to toggle the Gap select mode? I would like the gaps to not always be on.
View 3 Replies
View Related
Sep 6, 2012
i am trying to understand how to work in the connect fx mode, but one thing that seems to be completely eluding me is why the output going to my broadcast monitor (via Kona3) is showing only the output from the left window when in CFX (currently Connect FX schematic), and not the final video.
My mac screen has a 2 up view showing the CFX Schematic on the left and the CFX Result on the right.
Is there any way that i can use the two windows on the mac screen without affecting what is feeding the broadcast monitor? I really want a system that always shows me the final output on the broadcast monitor, with everything else happening on the mac screen.
View 1 Replies
View Related
Dec 16, 2013
When you're in source-sequence mode and push "f15" key (that is "player view mode" shortcut) several times, you can switch between different view modes. One in particular kept my attention: you can output a video frame with 3840x1080 resolution (double full hd), composed by primary output (on the left) and secondary output (on the right).
The strange thing is that these two video streams (primary and secondary) are not in sync: in fact secondary one is always delayed by one frame.
What is the purpose of this view mode? Is it possible to sync primary and secondary output in this particular mode? It would be great, because this way we could finally output stereoscopic 3D in side-by-side mode!
View 9 Replies
View Related
Apr 15, 2011
How to make objects grow in smoke. not Scale Mode!
View 6 Replies
View Related
Jul 23, 2012
To hide the top menu bar and use the application in full screen, you must specify this setting in the Smoke Setup utility, which is found in the Smoke 2013 folder. In the Smoke Setup utility, under the General tab, set the Menu Bar option to no. When you hide the top menu bar, certain options, exclusive to the top menu bar appear at the bottom right of the screen. You must restart Smoke after making the change for it to take effect.
why but it feels to much more like a real application again! Hadnt realised just how much I disliked menu bars until now.Now how do I create some color bars?
View 8 Replies
View Related
Oct 21, 2011
How to recreate the OVERLAY transfer mode on the timeline using AXIS? It seems to be available only through Action.
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
View 3 Replies
View Related
Jul 22, 2013
Whenever I try to enter source record mode the programs crashes and quits. I've tried with keyboard shortcut, using the option dropdown and the same thing happens. This did not happen with previous version.
View 2 Replies
View Related
Sep 10, 2011
I'm working on an edit, which is in video mode. Now I have to include OpenEXR material, which is in linear mode. How can I combine the two and still have the correct color?
I can set it in view mode to linear, but then all my video shows as linear too, plus, as soon as I leave the view mode, it all goes back to video, and my EXR's are too dark then..... what can I do?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 1 Replies
View Related
Sep 18, 2013
I am trying to UnInstall ACAD 2013 or ACAD LT 2013 French in "complete" silent mode !
C:Program FilesAutodeskAutoCAD 2013Setupfr-frSetupSetup.exe /P {5783F2D7-B001-0000-0102-0060B0CE6BBA} /M ACAD /language fr-FR
This command line run the UnInstall in inter-active mode ? (Repair / ReInstall / UnInstall)
Which is the MAGIC command line ?
View 3 Replies
View Related
Jan 8, 2014
Somehow I activated a mode where when I click on an object, if there are several objects there, it will bring up a little menu to pick which one I want, similar to Inventor if you hover or say "Select other...". How do I toggle this mode? Turns out I like it sometimes but usually I don't need it.
View 3 Replies
View Related
Dec 11, 2012
I have a site drawing which has a decently high resolution satellite image underneath. When I try to plot to a pdf, the underlying satellite image doesn't show up. In the plot-preview mode it does show up, but not in the actual pdf created.
View 5 Replies
View Related
Jul 30, 2012
I make use of thie BATTMAN command quite a lot as I set up and manage my drawings for my company, through this I am editing attributed information and have seen the options 'invisible', 'verify' and 'preset' are available. Confirm the functionality of this options and how they affect the attribute ?
View 2 Replies
View Related
