Somehow I activated a mode where when I click on an object, if there are several objects there, it will bring up a little menu to pick which one I want, similar to Inventor if you hover or say "Select other...". How do I toggle this mode? Turns out I like it sometimes but usually I don't need it.
View 3 Repliesi have toggle dcl , and lisp as an example , who can say that how can i make combination by toggle and define to change lisp ? and of course run to change lisp after my choise from toggle menu
(defun getValues () (setq a1 (get_tile "toggle1") a2 (get_tile "toggle2") a3 (get_tile "toggle3") a4 (get_tile "toggle4") a5 (get_tile "toggle5") (done_dialog 1) ) (defun c:aaa (/ an dcl_id) (setq dcl_id (load_dialog "rc-cap.dcl") ) (if (not (new_dialog "ABC" dcl_id)) (exit) (progn (action_tile "accept" "(getValues)")
[Code] .......
I've been running into a frustrating limitation with certain keyboard shotcuts for Nitrous display modes. For example, if I try to use my old 2011 shortcut for "Viewport Box Mode Toggle", the bounding box displays on TOP of the current shaded/wire mode instead of toggling. If I change the assignment to the new Nitrous command "Viewport Visual Style Bounding Box", it is no longer a TOGGLE key and to go back I must then use the key assigned to "Viewport Visual Style Wireframes/Shaded" (or classic "Wireframe/Smooth+Highlights Toggle")...
BUT...
In Nitrous both of these wire/shaded toggle commands do not work properly if you are changing from another display type (such as box). Instead of toggling between wire/shaded, they toggle between wire and the last display mode. So in essence there is no way to toggle between Box and Shaded without r-clicking on the viewport label every time you want to return to shaded mode as far as I can tell. Not being able to quickly toggle Box mode really screws up my work flow, so for now I'm reverting back to DirectX.
When in vertex, edge or poly mode, usually I was able to switch between them by pressing number 1,2,3,4,5. What also was useful, is if for instance I press the same number twice, then I would exit the sub mode. This was very useful. Now in this version this option is disabled by default, similar to the zoom extense all, but I was able to changed this in the UI settings.
View 4 Replies View RelatedIs there a way to toggle the Gap select mode? I would like the gaps to not always be on.
View 3 Replies View RelatedSearched the net and did find some official tutorials where its says the Poly mode could be toggled. Like hitting "2" once switches Edge and hitting twice toggles poly mode "off". But I don't find the option where it can be set.
View 3 Replies View RelatedHow do you toggle safe zones in video mode? (broadcast safe zones)
I am new to using Ai. I mostly used it for vectorizing and creating strokes and shape paths. Now i am trying to use it to improve the look of my Ae comps.
I have a problem with this command : "Toggle composite and grayscale mask in Quick Mask mode"I know i have to press the tidle key " ~ " to activate it but i'm using an Azerty keyboard (belgium) and i have trouble with it.The only way i can use the tidle key on my keyboard is to press "Option + n" keys.
So in Photoshop, i load a channel selection, turn into "quick mask mode" and then press "Option + n", but nothing happens.If i try with "Command+Option+n", i open the window for a new document.I have tried ALL combination of keys but nothing worked.I have also tried to change the keyboard input to Britain, Usa, etc but it still doesn't work.
I'm using the english version of Photoshop CS6 (Subscription), and an Azerty Keyboard (Belgium) on a Mac Osx Snow leopard.How can i solve this problem ?
I have an action with a number of items to do prior to releasing/proofing a file to print. I can record overprint preview using insert menu item, but this toggles to on or off depedning on what the last.
View 5 Replies View RelatedI have used the display selected with edges toggle quad menu item for years, and can't seem to get it to work for me. Is it broken?
View 5 Replies View RelatedThe big problem with CAT. 3dsmax 2012 64-bit. Problems have appeared after installation SP1. I adjust a skeleton. In Link Info In Setup Mode I activate Animation Controller and Additive To Setup Pose. Then I create an Absolute Layer and activate Setup/Animation Mode Toggle. The bone departs not clearly where.
View 5 Replies View RelatedI'm taking a photography class and we're getting a quick lesson in using Lightroom, working on Macs. I'm never used the program before and I use a PC so I'm not familiar with Mac either.
I'm catching on pretty quick, but Im wondering, is there a way to use keystrokes or shortcuts to toggle between the menu items at the top of the screen. The assistants in the class said that on a Mac you can access these menu items with the mouse, but in a PC you use the Alt + a letter and can get to the sub-items with either letters or the arrow keys.
“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
How do I get the last input to come up when pressing the up arrow key? Say I'm drawing a line & input @10,10. When I press the up arrow, the coordinates come up. How do I get @10,10 to come up? I've changed it before, but I can't remember how & I can't think of what to search for.
View 2 Replies View RelatedI am looking for a way to change the toggle polar On/Off from F10 to F6. I already did it with the "delete" and the "Ortho" keys but i can't find the macro for the toggle polar on/off.
Has you can see on the picture for Delete it's ^C^C erase;
For ortho it's ^O
Maybe for Polar it's ^P but i could validate with you before i do any changes. (;
In Autocad 2012 the white cursor automatically toggles to black when moved onto the white background of paperspace. This does not occur in 2013. Imported the sysvaribles from 2012 into 2013. Cursor still does not toggle.
View 5 Replies View RelatedAnother worsening thing in 2013: The isolate selection is a toggle
It's impossible to use isolate selection one after another to get deeper in complex models with many objects? Did I miss something?
how to setup a animation/setup mode toggle keyboard shortcut? i seem to be missing it!
View 2 Replies View RelatedWhen customizing the screen menus, adding a few icons or pull down menus, when autocad is restarted, Autocad reverts back to the default menu. How can I set this up to retain any menu changes I make.
View 2 Replies View RelatedLisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI have Photoshop CC, and when I try to click Stack Mode under Layer>Smart Object, it is grey.
View 1 Replies View RelatedIt's not greyed out, it's missing. Using PS CS3, on Windows XP SP2 and working now in RGB for design, but need to convert to CMYK for printing.
I've done this a million times and this is the 1st time CMYK has been missing.
I have deleted the PS preferances file to correct this problem only to have the problem re-occur when PS is re-started.
With a tool selected, the mode menu drops down and returns before a selection maybe made. Unusable situation.
I have returned to CS2 as a work around.
For some reason the 'Full Screen Mode with Menu Bar' option has a blue background now. The background used to be gray, and then one time i opened up Photoshop and now the background is blue. It is very annoying and affects my painting. The grey was neutral, now it is blue so my colors are going to appear off.
If you don't know what i mean: Open Photoshop, make a canvas (new image) Hit the key "F" on your keyboard 2 times so the canvas takes up the entire page but the menu bars are still up. The color around the canvas is Blue, when it has ALWAYS been gray.
I have just downloaded LR5 & trying out the develop mode. Don't know how it happened but lost the 'basic' menu in develop mode, how can I gewt this back?
View 2 Replies View Relatedi just started using gimp on ubuntu 13.10 . almost half of the menu items are greyed out. most of the filters work or ar not greyed out, g'mic is greyed out and so is most of the stuff in the file menu (export, save, save as, etc.) . i already tried re-installing gimp from the software center with no prevail. this is how it was the first time i installed it on this new ubuntu 13.10 .
is there something that i can do to maybe refresh the entire gimp folder maybe? maybe delete it then re-install gimp. i really dont know if this would fix anything though.
this is really irritating. and no its not the "image RGB/indexed mode" problem.
im pretty sure i dont have anything installed (like some weird ubuntu restricted access fake file) that could interfere with the interface at all as this is a pretty fresh installation. the most i have installed that might even be close to interfering with the interface is "pipelight" which is for flash and silverlight, not gimp.
i even tried different color profiles and none of them work. i even downloaded the brand new color profiles from adobe. none of those work either.
the only way i got ALL of the menu options back, including g'mic, was opening gimp through raw therapee (basically adobe lightroom for ubuntu) which might be of some use in finding an answer to this?
i already have everything i need installed including the ubuntu restricted access extras and such.i just would like gimp to open normally with all the normal file menu options enabled like everyone elses and not be all greyed out ..
BonusTools 2013 menu doesn't show in maya 2013,how can show it.
View 3 Replies View RelatedI am trying to UnInstall ACAD 2013 or ACAD LT 2013 French in "complete" silent mode !
C:Program FilesAutodeskAutoCAD 2013Setupfr-frSetupSetup.exe /P {5783F2D7-B001-0000-0102-0060B0CE6BBA} /M ACAD /language fr-FR
This command line run the UnInstall in inter-active mode ? (Repair / ReInstall / UnInstall)
Which is the MAGIC command line ?
I have a site drawing which has a decently high resolution satellite image underneath. When I try to plot to a pdf, the underlying satellite image doesn't show up. In the plot-preview mode it does show up, but not in the actual pdf created.
View 5 Replies View RelatedIm trying to do an assignment with Autodesk Inventor. We use Autodesk Inventor pro 2012. For some unknown reason EVERY time i download inventor 2012 pro the installation fails due to a corrupt file. So i thought (In desperation) i would downlaod the 2013 version and see if it would install. Lucky enough it all installed correctly. So i continue with my work on the 2013 edition, and when i go to save it it tells me, that i will not be able to use this file on previous versions. (Which i need to do). Is there by any chance a way to save files, that are compatible with older versins (Like in Word) ?
View 3 Replies View RelatedI make use of thie BATTMAN command quite a lot as I set up and manage my drawings for my company, through this I am editing attributed information and have seen the options 'invisible', 'verify' and 'preset' are available. Confirm the functionality of this options and how they affect the attribute ?
View 2 Replies View Related