Photoshop :: Toggle Composite And Grayscale In Quick Mask Mode
Jan 16, 2013
I have a problem with this command : "Toggle composite and grayscale mask in Quick Mask mode"I know i have to press the tidle key " ~ " to activate it but i'm using an Azerty keyboard (belgium) and i have trouble with it.The only way i can use the tidle key on my keyboard is to press "Option + n" keys.
Â
So in Photoshop, i load a channel selection, turn into "quick mask mode" and then press "Option + n", but nothing happens.If i try with "Command+Option+n", i open the window for a new document.I have tried ALL combination of keys but nothing worked.I have also tried to change the keyboard input to Britain, Usa, etc but it still doesn't work.
Â
I'm using the english version of Photoshop CS6 (Subscription), and an Azerty Keyboard (Belgium) on a Mac Osx Snow leopard.How can i solve this problem ?
View 10 Replies
ADVERTISEMENT
Nov 10, 2013
i have 3 layers in photoshop. Backgroundlayer1layer2Now on layer 2 i did a selection and entered into quick mask mode and then applied gussian blur.
When this is done does the selection borders try to blend with the back ground or will they try to blend with the layer 1 as it is the layer just behind the layer 2. In case if there is no background, I mean if all three are layers then what happens?
View 3 Replies
View Related
Nov 18, 2008
the default colour and opacity for the Quick Mask mode? I was trying to find a way of resetting it and don't seem to be able to find such an option. I don't really want to trash my preferences file...
View 10 Replies
View Related
Nov 24, 2005
Ok, so i'm trying to cut an image out in photoshop like usual, and i go into quick mask mode, make my selection, go back in to normal mode and my image that i need cut out is selected, nothing else. However, when i cut it out, it takes some of the image that i didn't select with it, but only parts of it and they are kind of transparent. Anyone know what the problem is?
View 2 Replies
View Related
Apr 15, 2009
I want to apply a suntan effect to a jpeg pic. When I click on the quick mask mode, grab the brush and start painting the mask nothing is happening?
View 4 Replies
View Related
Sep 19, 2012
I have recently installed Photoshop CS6 after previous happy experience with CS3. The software appears to be seizing up when editing a selection in quick mask mode (image or layer mask) under the following conditions:
Â
- 64 bit mode
- image > screen size, especially at 100% maginification
- or image magnification adjusted whilst in quick mask
Â
The red mask appears slowly and only where I move the mouse curser - but will not cover the entire masked area.The software freezes, and I have to kill the process from the OS. Task manager shows its status as 'running' and memory / CPU do not appear to be maxed out.
Â
System info:
Â
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
View 10 Replies
View Related
Jan 27, 2006
trying to mask a certain area of a face with another picture, so I use the quick mask tool to paint in the area, but when I exit it and enter standard mode, there is nothing selected. It does however act as if there is a selection, because the other layer only is added to that section.
Also, I don't know if this is related to the other problem, but when I move another image into the original one to create two layers, then select the overlay blending option, I am happy with how it looks. However, after adding the layer mask, the other layer is really pale around the masked area.
View 8 Replies
View Related
Aug 1, 2005
For some reason my quick mask mode stopped working. I can go into quick mask mode. I can highlight what I want to select. but when I exit out to make the changes I wanted to, the only thing selected is the outside edge of the image I'm working on. So instead of having the extent of the image and the part I highlighted selected (basically everything except what I colored in QMM) only the extent of the image is selected.
I have even uninstalled photoshop, re-booted, and re-installed photoshop and I still have the same problem.
View 6 Replies
View Related
Mar 12, 2013
When I enter into "quick mask mode" and paint in an area on my image that I want my selection to be, then enter out of "quick mask mode". The entire image is selected. It's like a did a "Command A".
Also how do you change the color of the "quick mask mode"?
Â
Photoshop CS6, Mac.
View 5 Replies
View Related
Nov 27, 2012
I'm trying to find a quicker way to create a mask. In the image below I am removed the white areas, and I use the magic wand with - (minus) selected, at the moment I have to switch between quick mask mode as to see what parts you have missed.
On the left you can see an area inside the object that has been removed and the part next to is white, I would like to be able to click this white area and it ruen red so that it adds it to the selection?
Â
how this could be done or is there an easier way in which to do this?
View 11 Replies
View Related
Jun 20, 2008
I'm currently jumping back and forward between quick mask mode and my standard layer. When I am in the standard layer the brush tool is performing as it should, but when I go into quick mask it is erasing my selection (red) rather than filling in where I draw!
View 1 Replies
View Related
Feb 12, 2014
Why is there no composite grayscale printing option in Illustrator? I see it in Acrobat and Indesign. There are times we need to print grayscale composites to check layout and content.
Â
Besides converting all colors to grayscale, I see no way to simply print grayscale out of Illustrator. Am I missing something?
View 3 Replies
View Related
Jul 4, 2013
Is there a keyboard shortcut for "Toggle mask visibility"? I can do this by ALT-clicking on the layer's mask, but I would like to assign a shortcut for this on a button on my Wacom Intuos 4 drawing tablet. So far I haven't found a menu shortcut for it, nor have I found a way to add my own (Edit-Keyboard shortcuts) as the function isn't listed there.
View 10 Replies
View Related
Jul 15, 2013
How do I change the mode settings in output from composite to separations?
View 3 Replies
View Related
Dec 30, 2012
While creating various circular masks with a radial gradient from white to black, whenever I change the blending mode of the mask path Ai will throw me out of mask mode into layer editing mode. Since this is on a large document of ~2Gb file with multiple artbords for large poster & UI refresh speed is slow, this has become quite frustrating. Is this normal Ai behaviour?
View 3 Replies
View Related
Oct 21, 2007
I use Photoshop LE 5.0, which has many of the BIG Photoshop features.
If I take a web page screenshot and turn it into greyscale and print that,
I still get some colors coming thru on the printout, even though it looks b/w on the screen.
Is this a common problem? Photoshop or Printer or Windows?
View 2 Replies
View Related
Sep 7, 2011
I've been running into a frustrating limitation with certain keyboard shotcuts for Nitrous display modes. For example, if I try to use my old 2011 shortcut for "Viewport Box Mode Toggle", the bounding box displays on TOP of the current shaded/wire mode instead of toggling. If I change the assignment to the new Nitrous command "Viewport Visual Style Bounding Box", it is no longer a TOGGLE key and to go back I must then use the key assigned to "Viewport Visual Style Wireframes/Shaded" (or classic "Wireframe/Smooth+Highlights Toggle")...
BUT...
In Nitrous both of these wire/shaded toggle commands do not work properly if you are changing from another display type (such as box). Instead of toggling between wire/shaded, they toggle between wire and the last display mode. So in essence there is no way to toggle between Box and Shaded without r-clicking on the viewport label every time you want to return to shaded mode as far as I can tell. Not being able to quickly toggle Box mode really screws up my work flow, so for now I'm reverting back to DirectX.
View 2 Replies
View Related
May 21, 2012
When in vertex, edge or poly mode, usually I was able to switch between them by pressing number 1,2,3,4,5. What also was useful, is if for instance I press the same number twice, then I would exit the sub mode. This was very useful. Now in this version this option is disabled by default, similar to the zoom extense all, but I was able to changed this in the UI settings.
View 4 Replies
View Related
Jan 6, 2013
I have the latest version of CS6 on my Mac, OS X 10.8.x.  I have found a bug where Quick Mask is not always activated when you select it. Meaning, you select Quick Mask and the proper pen, color, etc., and it won't paint in the mask (default = red).  It also doesn't appear to be actually /doing/ a mask either, so I don't think this is a display/driver issue.
View 3 Replies
View Related
Dec 8, 2003
I select edit in quick mask mode and start painting away, I switch back to standard mode and hit delete to leave me with the image I want..and all the rest dissapears...as it should. But the image I have left starts to go transparent.
Can anyone help with this as its starting to drive me mad..I have even uninstalled and reinstalled photoshop but I still have the same problem. How can I have the image remain in all its glory and not transparent?
View 6 Replies
View Related
Oct 23, 2004
How do you change the red color of the quick mask to another color. Im editing a photo and the background has a lot of yellow in it. Its hard to tell whats been masked and what hasnt. I would like to change the masking color to black or blue.
View 3 Replies
View Related
Mar 12, 2009
I've clicked that mysterious and hidden button that gets me every time.
Been editing all morning by selecting quick mask using thebrush tool , then deselecting quick mask etc etc.
Now when I select quick mask and just paint in even just a dot when I exit quick mask the whole image is selected.
I've reset all tools, hunted the web,
View 15 Replies
View Related
Jun 27, 2009
I have recently purchased my first Photoshop editing program I am a novice to both
As I enjoy my photography I also love playing with the editing side of my hobby, so I recently purchased Photoshop Elents 6 and ditched my old built-in editing program. I have just started playing with changing the background to studio portrait photos, no I am not a pro just a simple amateur, although I am hoping to do some portrait photography as a pastime (I used to dabble a bit in that field with weddings many many years ago). I have been scouring the tutorials on the web for assistance and come across mention of 'Quick mask'. This would be very helpful to me with my photo background changing, but I don't seem to have it in my program Looking into it further, I am wondering if I have purchased the wrong Photoshop program. The mention of 'Quick mask' refers to Photoshop 6, which I thought I had, but can someone explain to me the differences between the various Photoshop programs as I am confused as to why my later version has not got what the earlier Photoshop 4 has.
View 4 Replies
View Related
Jan 8, 2014
Somehow I activated a mode where when I click on an object, if there are several objects there, it will bring up a little menu to pick which one I want, similar to Inventor if you hover or say "Select other...". How do I toggle this mode? Turns out I like it sometimes but usually I don't need it.
View 3 Replies
View Related
Oct 7, 2012
Is there a way to toggle the Gap select mode? I would like the gaps to not always be on.
View 3 Replies
View Related
Nov 21, 2011
Searched the net and did find some official tutorials where its says the Poly mode could be toggled. Like hitting "2" once switches Edge and hitting twice toggles poly mode "off". But I don't find the option where it can be set.
View 3 Replies
View Related
Nov 24, 2008
This issue has been around for the last 4 versions at least, Quick Mask stops working, I am getting fed up with having tio reset photoshop to its defaults, because this means that it takes me a good 30 min to reset all of my settings again, and as this has now happened 4 times today, it is costing me money, at least CS3 was a little bit more reliable than CS4, I certainly will not be upgrading our copies of Photoshop.
Has anyone got a simple way to get Quick Mask working again without loosing the other settings from Photoshop...
Or does anyone know why this happens? My system is 4 x Quad Core CPU, running 16Gb RAM and 2 x 8800 Video Cards on x64 Windows XP, so it cannot be down to memory.
View 19 Replies
View Related
Feb 12, 2004
I must have 'done' something to change how it works because now when I use it, the pixels are not completely selected.
I press the quick mask button and paint the area i want to mask. Then when I have finished, I go back to normal mode. I usually push 'SHIFT' + 'CTRL' + 'I' to invert my selection and then delete everything I didn't mask however, now when I try to invert, I get the message 'No pixels are more than 50% selected'.
View 3 Replies
View Related
Oct 31, 2008
I run SC3 on a PC. The other day I did something that has made it so my quick mask selection no longer works but I do not know what it was. What happens is after in go into the quick mask mode (tap the q key) and with the brush color the section I wish to mask; I then tap the q key again to exit the quick mask mode but the marching ants surround the entire photo not my selection. When in the quick mask mode it does show on the title bar that I am in the quick mask mode and when I tap q again that I am going back to normal mode.
View 7 Replies
View Related
Mar 15, 2006
I'm a pro user of MS Paint at work but was wondering if there was Photoshop feature similar to the Paint one whereby you can cancel out the white background of an image automatically? So, instead of pasting a picture and it's square white background you just paste the image?
View 2 Replies
View Related
Apr 16, 2009
When I make a selection on a photo with quick mask in photoshop CS3 and shift > Ctrl > I and delete the background, my image that i'm left with is like 50% opaque. I don't know why its doing this. I've even tried Ctrl > J and then deleting the background and its still opaque. So I am needing some help here because i need to figure out why the images i'm selecting with QM aren't coming out at 100% opacity. Thanks. Here's what it looks like when I delete the background after doing Shift > Ctrl > I
View 9 Replies
View Related
