I'm currently jumping back and forward between quick mask mode and my standard layer. When I am in the standard layer the brush tool is performing as it should, but when I go into quick mask it is erasing my selection (red) rather than filling in where I draw!
View 1 Repliesi have 3 layers in photoshop. Backgroundlayer1layer2Now on layer 2 i did a selection and entered into quick mask mode and then applied gussian blur.
When this is done does the selection borders try to blend with the back ground or will they try to blend with the layer 1 as it is the layer just behind the layer 2. In case if there is no background, I mean if all three are layers then what happens?
the default colour and opacity for the Quick Mask mode? I was trying to find a way of resetting it and don't seem to be able to find such an option. I don't really want to trash my preferences file...
View 10 Replies View RelatedOk, so i'm trying to cut an image out in photoshop like usual, and i go into quick mask mode, make my selection, go back in to normal mode and my image that i need cut out is selected, nothing else. However, when i cut it out, it takes some of the image that i didn't select with it, but only parts of it and they are kind of transparent. Anyone know what the problem is?
View 2 Replies View RelatedI want to apply a suntan effect to a jpeg pic. When I click on the quick mask mode, grab the brush and start painting the mask nothing is happening?
View 4 Replies View Related I have recently installed Photoshop CS6 after previous happy experience with CS3. The software appears to be seizing up when editing a selection in quick mask mode (image or layer mask) under the following conditions:
- 64 bit mode
- image > screen size, especially at 100% maginification
- or image magnification adjusted whilst in quick mask
The red mask appears slowly and only where I move the mouse curser - but will not cover the entire masked area.The software freezes, and I have to kill the process from the OS. Task manager shows its status as 'running' and memory / CPU do not appear to be maxed out.
System info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
trying to mask a certain area of a face with another picture, so I use the quick mask tool to paint in the area, but when I exit it and enter standard mode, there is nothing selected. It does however act as if there is a selection, because the other layer only is added to that section.
Also, I don't know if this is related to the other problem, but when I move another image into the original one to create two layers, then select the overlay blending option, I am happy with how it looks. However, after adding the layer mask, the other layer is really pale around the masked area.
For some reason my quick mask mode stopped working. I can go into quick mask mode. I can highlight what I want to select. but when I exit out to make the changes I wanted to, the only thing selected is the outside edge of the image I'm working on. So instead of having the extent of the image and the part I highlighted selected (basically everything except what I colored in QMM) only the extent of the image is selected.
I have even uninstalled photoshop, re-booted, and re-installed photoshop and I still have the same problem.
When I enter into "quick mask mode" and paint in an area on my image that I want my selection to be, then enter out of "quick mask mode". The entire image is selected. It's like a did a "Command A".
Also how do you change the color of the "quick mask mode"?
Photoshop CS6, Mac.
I have a problem with this command : "Toggle composite and grayscale mask in Quick Mask mode"I know i have to press the tidle key " ~ " to activate it but i'm using an Azerty keyboard (belgium) and i have trouble with it.The only way i can use the tidle key on my keyboard is to press "Option + n" keys.
So in Photoshop, i load a channel selection, turn into "quick mask mode" and then press "Option + n", but nothing happens.If i try with "Command+Option+n", i open the window for a new document.I have tried ALL combination of keys but nothing worked.I have also tried to change the keyboard input to Britain, Usa, etc but it still doesn't work.
I'm using the english version of Photoshop CS6 (Subscription), and an Azerty Keyboard (Belgium) on a Mac Osx Snow leopard.How can i solve this problem ?
I'm trying to find a quicker way to create a mask. In the image below I am removed the white areas, and I use the magic wand with - (minus) selected, at the moment I have to switch between quick mask mode as to see what parts you have missed.
On the left you can see an area inside the object that has been removed and the part next to is white, I would like to be able to click this white area and it ruen red so that it adds it to the selection?
how this could be done or is there an easier way in which to do this?
I must have 'done' something to change how it works because now when I use it, the pixels are not completely selected.
I press the quick mask button and paint the area i want to mask. Then when I have finished, I go back to normal mode. I usually push 'SHIFT' + 'CTRL' + 'I' to invert my selection and then delete everything I didn't mask however, now when I try to invert, I get the message 'No pixels are more than 50% selected'.
the size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
I'm using Photoshop CS5 on a MacBook Air running OS X 10.8.2...I have managed to change the brush in my quick selection tool, or at least the way it looks on the screen, and I can't figure out how to get it back.
It now looks like a paint brush with light rays around it instead of the circle with the plus sign in the middle. It does not change size when the ] key is hit.
The current preset says its Quick Selection Tool Hard Round 250 1...In addition when I use the marquee tool I can not see the crosshairs when I am inside the image.The only thing I have knowingly done is to create a preset for a dashed line and imagine in doing that I have messed up the other. I have also changed the preferences for the cursor back and forth between standard and precise but it doesn't seem to make any difference.
Why is PS defaulting all layers to Vector Mask mode when I try to create any shape?
Eg: New File > New Layer > Draw a box ...boom ... layer has a vector mask applied to it
Why is it so ...?
As you would know...when this vector mask is applied... i cant just grab the paint bucket tool and fill the box...i have to disable the freaking mask...
I have Photoshop CS2 and I am trying to "fix" a photo. I'm using a tutorial,and it worked on a previous photo but seems to have quit on me. I made a new layer from the original layer, used filter> other> high pass (set to 3.5) then image> adjustments>desaturate. Inverted the layer added a vector mask and inverted that as well. I set the blending mode to overlay, and the foreground color to white.
View 6 Replies View RelatedWhen using the brush tool what is the difference between using the brush in color mode on a normal layer vs using the brush in normal mode on a color mode layer?
View 5 Replies View RelatedUsing the brush tool in CS3, I find I have no normal mode to choose in the options toolbar. The available blend modes start with "behind" and end with "luminosity," but there is no normal. Shouldn't I find this option here?
View 3 Replies View RelatedWorking with Windows platform, using Photoshop CS4, Brush Tool is not working with Layer Mask, how can I resolve this challenge?
View 3 Replies View RelatedI am constantly switching the mode of the Brush tool from Normal, Lighten, Color, and Darken. The only way I've found to switch is to select the mode from the dropdown.
I've trying creating actions to switch the mode but the actual mode selection is not recorded in the action.
, I'd like to assign keyboard shortcuts that "select brush tool, set mode to Lighten", etc.
I am using CS6 Extended.
I have cannot paint in black to conceal on a layer mask. I have "NORMAL" mode set and the foreground color is set to black. When I paint or use the gradient tool in "normal" mode with black it paints to transparent.Before the upgrade it was normal. I have this problem on both CS6 apps pc-and-laptop.
View 4 Replies View RelatedI must have fat fingered something and I now when I click on the Eraser Tool or the Brush Mask Tool instead of getting a circle or square, I get and icon of the tool instead. They still work but they're harder to use without seeing the circle or square depending on what's selected. I've been using Corel for many years and never had this happen and I can't figure out how to switch back.
View 3 Replies View RelatedI'm working in a multi layered CS5.1 Photoshop project (I did not create it). One of the adjustment layers in the project needs a layer masks, and when I create one it is not working properly. I make my selection that I want to mask off and create the layer mask it creates it with White and a 50% gray insted of black. Likewise when I alt click to create a layer mask it fills it in with black and 50% gray. The layer did have a 87% opacity to it so I thought this was causing the gray to happen, but when I turned the Opacity to 100% the mask was still being created with gray.
I use the fill tool to fill the gray with Black or White (Fill settings are opacity 100 and fill 100) it fills the mask more like my fill opacity is set to 50%. Likewise it does this for the pant brush as well. I have messed with every layer setting I can find including the layer mask panel and the adjustment layer panel, and nothing seem to work.
I was airbrushing some photos and I came across a tutorial where part of it involves creating a mask layer and filling it with black.
View 2 Replies View RelatedWhile creating various circular masks with a radial gradient from white to black, whenever I change the blending mode of the mask path Ai will throw me out of mask mode into layer editing mode. Since this is on a large document of ~2Gb file with multiple artbords for large poster & UI refresh speed is slow, this has become quite frustrating. Is this normal Ai behaviour?
View 3 Replies View Relatedi'm making some signatures for the reptile sites i use out of photos taken.
I have one photo of a lizard that is on a white flooring, so i was trying to replace the white with a brown colour using the colour replacement tool. It went horribly... I kept playing with the options but the white just got replaced by pale, obvious colours no matter which colours i picked so i gave up.
Now i was getting into another pic and want to erase the background and after selecting the eraser tool, it just started colouring it in with the fore-colour instead of erasing. I've tried changing the colour replacement options and got it so that it just does nothing when i try to erase.
My colour replacement settings are:
mode - hue
sampling - continuous
limits - contiguous
tolerence - 30%
anti-alias ticked
My eraser settings are:
brush
opacity - 100%
flow - 100%
erase to history ticked.
how i can reset my photoshop back to default settings ...
I have the latest version of CS6 on my Mac, OS X 10.8.x. I have found a bug where Quick Mask is not always activated when you select it. Meaning, you select Quick Mask and the proper pen, color, etc., and it won't paint in the mask (default = red). It also doesn't appear to be actually /doing/ a mask either, so I don't think this is a display/driver issue.
View 3 Replies View RelatedI select edit in quick mask mode and start painting away, I switch back to standard mode and hit delete to leave me with the image I want..and all the rest dissapears...as it should. But the image I have left starts to go transparent.
Can anyone help with this as its starting to drive me mad..I have even uninstalled and reinstalled photoshop but I still have the same problem. How can I have the image remain in all its glory and not transparent?
How do you change the red color of the quick mask to another color. Im editing a photo and the background has a lot of yellow in it. Its hard to tell whats been masked and what hasnt. I would like to change the masking color to black or blue.
View 3 Replies View RelatedI've clicked that mysterious and hidden button that gets me every time.
Been editing all morning by selecting quick mask using thebrush tool , then deselecting quick mask etc etc.
Now when I select quick mask and just paint in even just a dot when I exit quick mask the whole image is selected.
I've reset all tools, hunted the web,
I have recently purchased my first Photoshop editing program I am a novice to both
As I enjoy my photography I also love playing with the editing side of my hobby, so I recently purchased Photoshop Elents 6 and ditched my old built-in editing program. I have just started playing with changing the background to studio portrait photos, no I am not a pro just a simple amateur, although I am hoping to do some portrait photography as a pastime (I used to dabble a bit in that field with weddings many many years ago). I have been scouring the tutorials on the web for assistance and come across mention of 'Quick mask'. This would be very helpful to me with my photo background changing, but I don't seem to have it in my program Looking into it further, I am wondering if I have purchased the wrong Photoshop program. The mention of 'Quick mask' refers to Photoshop 6, which I thought I had, but can someone explain to me the differences between the various Photoshop programs as I am confused as to why my later version has not got what the earlier Photoshop 4 has.