While creating various circular masks with a radial gradient from white to black, whenever I change the blending mode of the mask path Ai will throw me out of mask mode into layer editing mode. Since this is on a large document of ~2Gb file with multiple artbords for large poster & UI refresh speed is slow, this has become quite frustrating. Is this normal Ai behaviour?
View 3 RepliesAlright, so I'm about to rip my hair out. I'm a Photoshop guy who occasionally vectorizes stuff into Illustrator CS4 by exporting work paths. Usually it works fine, but it's been a few years since I've done this and I cannot for the life of me figure out how to apply an opacity mask to an area of a layer so that it is transparent through all objects of the layer down to the background.
Â
Basically, I created an image with text in Photoshop. I exported work paths to illustrator and colored/filled in all the objects. I need to cut out certain parts of the image so that they're transparent through to the background so that when the image is printed up on a shirt, fabric shows through rather than ink. This sounds like a stupid question, and it probably is, but I just can't get it to work.
Â
I've gone through all the steps of creating an opacity mask, but every time I make the object transparent, I just get a white fill from an underlying object. It will not cut through to the transparent background. I need to get this object to cut through all layers.
I'm in the process of drawing a site plan which contains buildings, roads and wooded areas. I want to draw roads which go through the wooded areas. I want both the road and the woods to be opaque except where the woods overlaps the road (I want the wood to be partially transparent at the overlap). Example of the effect I want is shown below. I don't get this effect when trying to use blending transparency modes. I'm sure it can be done with the opacity mask but I've tried all sorts of combinations and not managed to get this effect.
View 9 Replies View RelatedI work on a grafic. It uses text, which already is converted to paths. The counters of my caracters were kicked out of their original positions, due to a spurious action. Now I’m trying to bring them back into the already existing mask/path.
Â
Selecting the counters’ paths is no problem here. It’s more about, how to get and merge those vectors into the mask-layer.I tried the direct-selection-tool, copy/pasting, dragging, cmd J – none of those methods brought any satisfaction.
Level: Newbie  OS: Win7 64bit  Ia: Cs6
Â
Once I use a Clipping Mask on a layer is the entire document covered in a mask?
Â
And/or is all the artwork from then on inside the mask?
Â
I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.
Â
So, then I went and found a lesson that contained the use of a Clipping Mask.
Â
I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)
Â
However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??
Â
So, I have been trying to abate my problem in lots of different ways.
Â
I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.
Â
I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it because I am not getting behind the Mask?
I have two layers. Upper most with text is locked.Bottom layer is an image I have applied a transparency/gradient mask for the raster image. Now, seems my layers palette is stuck in a mode called 'Layers (Opacity Mask)'.Not seen this before, but this is CS6. How do I get out to the main, root level of the layers palette?
View 1 Replies View RelatedWin7 64bit Ai: Cs6
 Â
[URL]
Â
down under step #4 it says to Copy (& Paste) the circle that's inside a Clipping Mask and to the drag it out of the mask in order to duplicate it twice.
Â
I've pulled it out of the mask or even, actually, how to go about pulling it out of the mask
Â
thus far I've Copied and Pasted in In Front ... does copying and pasting it in front bring it outta the mask?
Â
do i need to create a new layer after I've Copied it and then Paste it on the new layer?
I'm editing a logo for a client. Part of their logo is a gradient behind a clipping mask. When I release the clipping mask the gradient is uneditable. I have checked my layers panel and ther gradient is listed as image. I am using illustrator cs5 on Mac os 10.6.8..
View 1 Replies View RelatedAny way to do this using strokes, but everything I've tried so far has been unsuccessful. I'm starting to realize that this may actually be impossible, but maybe there's a trick I'm unaware of. Pic should explain what I'm trying to do.
View 3 Replies View RelatedUsing: WIN7, Adobe CS5, PS, AI
Â
When I need to move a project from Photoshop to Illustrator, I need an automated way to prep shape and vector mask items for export--preferably preserving the structure and layout that already exists as layer names and order, character and paragraph settings, and of course global registration. My scripting is limited to recording actions, so I need to find an existing script or get coached on this. Any recommendations?
Â
I have googled and waded through numerous forum posts trying to research this on my own, so I know about the ability to export my path collection, but that's usually inapplicable in reality. It only deals with vectors from the Paths palette. In Photoshop, I use the Paths pallet to store master and WIP paths, but all the working paths are either shapes or vector masks--or active type layers. Often enough that it's become an issue, I'll need to move the whole project to Illustrator. Obviously, the process has issues; I'm not expecting the rastor layers or Photoshop styles to carry over, but I see no reason why I can't capture text, shape and vector mask elements.
Â
They all have a vector component, but simply opening a PSD in Illustrator flattens (badly) the layers. I select the "Convert Layers as Objects" but have yet to see it extract editable text. I'm not sure if it even attempts to do anything with vector shapes or masks. I've got a process for moving a project one element at a time, using registration marks--but this requires turning text into shapes most of the time, especially if I am trying to preserve kerning and leading crucial to the layout. Maybe I just have not found the right info, and there is a way to transfer editable text without losing character and paragraph settings.
Â
For now, I'd be happy to stop wasting time doing a ton of conversions and renaming by hand, just so I can preserve the work I've already invested.
Â
One suggestion, posted under a multiple path export question, was to use scripting... but no one explored or explained how to go about it. I'm not asking for the impossible, however. I simply working out my own solution: if there is no application method for transferring the elements, try to script a method to prep those elements for export. Before I even attempt to reinvent someone's wheel, I am putting the question out there:
Â
I kept at it and managed to open my current project PSD in AI with text and shape/mask vectors successfully--not as cleanly as I'd hoped but the relative positioning of things was acceptable. I am still interested in hearing people's suggestions on better ways to transfer work from one tool to the other, though. I know this is going to come up for me again and again.
I'm using X5 and trying to save a PNG with a transparency mask. Everytime I save or export, I get the white box around it. I read a few posts that talk about a "masked" option check box, but that is not on my PNG save dialog box.
View 2 Replies View Related i am having a problem with the mask automatically deleting and making transparent the image when I load up a TGA. Simply deleting the mask doesn't bring back the parts of the image that are become transparent, the mask is deleting everything it touches upon loading of the image. Is this a setting somewhere I accidentally turned on? or a bug? PSP didn't used to do this when I first installed it. I have reset all the preferences, uninstalled/ reinstalled, but no fix.
This is what I am getting in PSP:
pictures of my car and adding effects and making my pictures really look good. I am in the process of making a new background for my computer i used a layer mask and set the background image to transparent.. I have the regular picture of my car as layer 1.. now when i use the gradient tool to show the transparency behind it works fine.. i save it as a PNG file and everything but when I go to set it as my background, the BLACK background doesn't fade into the picture.. the surrounding area where the transparent layer was showing through is always WHITE.
how can i make the black fade in? i know i can just make the background of the picture black instead of transparent but i want to be able to post these on the internet and give them to my parents so they can do the same.. so i dont want to make everyone have a black background to make it look right, which is why i want transparent.
What I want to do is create a sort of “transparency layer mask”, meaning that this layer will go on top of all my existing layers and will make an area transparent according to the mask. Kind of drilling a hole to transparency through all the layers underneath. I see that you can do similar things with adjustment layers but I couldn’t make one for transparency. Even better would be to be able to specify which underneath layers this layer will affect.
View 5 Replies View RelatedI need to make an object or group transparent towards its borders.
In particular, I drew a red heart and gave it a yellow contour with 20 steps, imitating a gradient. So the heart looks like it has a gradient (from red to yellow) towards its border.Â
Now I need this heart to also be transparent towards the border. The transparency should begin somewhere in the red part and slowly mask everything and it should end just before the outer border, which should be completely transparent.
The radial transparency tool does not produce good results, because the heart borders are not uniformly transparent. I need a mask exactly of the heart shape.
how to do it inside CorelDRAW?
how to manipulate the size of the wipeout for a text mask.Â
Simply selecting the masked text in C3D 2011 provided pick boxes at the four corners of the wipeout, making it very easy to manipulate the size of the wipeout box. I'm hoping to do the same in C3D 2012, but the wipeout seems to be treated like a block and lacks the pick boxes.A system variable maybe?
Is this possible to do? The mask is arranged infront of the layer I would like to click on.
View 1 Replies View RelatedHow do I do this in CS4?
View 9 Replies View Relatedi have 3 layers in photoshop. Backgroundlayer1layer2Now on layer 2 i did a selection and entered into quick mask mode and then applied gussian blur.
When this is done does the selection borders try to blend with the back ground or will they try to blend with the layer 1 as it is the layer just behind the layer 2. In case if there is no background, I mean if all three are layers then what happens?
the default colour and opacity for the Quick Mask mode? I was trying to find a way of resetting it and don't seem to be able to find such an option. I don't really want to trash my preferences file...
View 10 Replies View RelatedOk, so i'm trying to cut an image out in photoshop like usual, and i go into quick mask mode, make my selection, go back in to normal mode and my image that i need cut out is selected, nothing else. However, when i cut it out, it takes some of the image that i didn't select with it, but only parts of it and they are kind of transparent. Anyone know what the problem is?
View 2 Replies View RelatedI want to apply a suntan effect to a jpeg pic. When I click on the quick mask mode, grab the brush and start painting the mask nothing is happening?
View 4 Replies View RelatedWhy is PS defaulting all layers to Vector Mask mode when I try to create any shape?
Eg: New File > New Layer > Draw a box ...boom ... layer has a vector mask applied to it
Why is it so ...?
As you would know...when this vector mask is applied... i cant just grab the paint bucket tool and fill the box...i have to disable the freaking mask...
In Photoshop, I have removed part of a layer via a mask, leaving only one part of the image. Now I wish to save this part as an independent image, png or gif with a transparency. How can I achieve this?
View 2 Replies View RelatedMy subject line pretty much sums up what I want to ask.
The thing is I've learned how to do both of them, but every textbook exercise I've done regarding one I found out that I can pull off with the other too.
Are they simply two different mechanisms for doing the same thing?
I am soliciting input about the specific steps needed to efficiently go from an alpha channel mask to a stroked path on a new layer. That is, the selection outline(marching ants)that can be derived from the mask wants to be converted to a path and stroked and placed on a new layer. I am looking for a minimum set of steps to get there.
Running CS3 ext on a Windows platform.
I have recently installed Photoshop CS6 after previous happy experience with CS3. The software appears to be seizing up when editing a selection in quick mask mode (image or layer mask) under the following conditions:
Â
- 64 bit mode
- image > screen size, especially at 100% maginification
- or image magnification adjusted whilst in quick mask
Â
The red mask appears slowly and only where I move the mouse curser - but will not cover the entire masked area.The software freezes, and I have to kill the process from the OS. Task manager shows its status as 'running' and memory / CPU do not appear to be maxed out.
Â
System info:
Â
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
trying to mask a certain area of a face with another picture, so I use the quick mask tool to paint in the area, but when I exit it and enter standard mode, there is nothing selected. It does however act as if there is a selection, because the other layer only is added to that section.
Also, I don't know if this is related to the other problem, but when I move another image into the original one to create two layers, then select the overlay blending option, I am happy with how it looks. However, after adding the layer mask, the other layer is really pale around the masked area.
For some reason my quick mask mode stopped working. I can go into quick mask mode. I can highlight what I want to select. but when I exit out to make the changes I wanted to, the only thing selected is the outside edge of the image I'm working on. So instead of having the extent of the image and the part I highlighted selected (basically everything except what I colored in QMM) only the extent of the image is selected.
I have even uninstalled photoshop, re-booted, and re-installed photoshop and I still have the same problem.
I am reading a tutorial about the background eraser, and in this tutorial, on the screenshots, the erased parts are in red. It is the same red than the default one for the mask mode.
Is there a mode to see the mask color instead of what there is beneath the layer ?
Note : Maybe the tutorial author put a red layer beneath the current layer...
For some reason, I'm not able to get my Mask Mode button "turned on" -- the Help section pointed to "Window > Mask mode on" -- but even though a shape / object / photo is selected, mask features always remain unavailable.
View 2 Replies View Related