I have two layers. Upper most with text is locked.Bottom layer is an image I have applied a transparency/gradient mask for the raster image. Now, seems my layers palette is stuck in a mode called 'Layers (Opacity Mask)'.Not seen this before, but this is CS6. How do I get out to the main, root level of the layers palette?
View 1 RepliesI'm trying to apply an opacity mask to multiple layers (which happen to be contained within a Layer Mask). When I make the Opacity Mask, it takes all of the stuff on different layers and compresses them to a single layer (see attached images). I would like to keep the data on their assigned layers for later editing. I've done this before, but I have a feeling I have a setting or pref de-selected somewhere. Could the layer mask be the culprit?
View 6 Replies View Relatedwhen I added a layer mask to a layer, it would display in the palette as the alpha channel, which was very handy. Now, when I add a layer mask, it only appears as the mask icon; i.e., gray square with white circle in the middle. I have no clue what I did to change from the one to the other, but I would certainly like to get the alpha representation back!
View 3 Replies View RelatedIn CS6 I created a clipping mask with an image above a type layer, and when I lower the opacity of the image layer, it starts turning the color of the text green? Why is this?
1. How could I lower the opacity of the image inside the text?
2. The same thing happens when I try to change the blending of the clipping mask with the text layer beneath it. Why is turning green?
For example I would like to make my images layer Green and my copy layer Red in my layers palette.
View 6 Replies View RelatedIs it possible to set the blending mode or the opacity settings formultiple layers all at once? Ideally I'd like to select multiple layersand change the settings for all of them at once, but I can't seem to figureout a way to do this, so I think it doesn't exist?
Is this something other people would like to be able to do?
A problem has developed in my photoshop CS 6 64 bit on windows 7. I can't paint at full opacity in a layer mask. It is like an 75 % opacity brush. I have gone back to the default brushes soit is not the particular bursh. My brush settings are all at 100%, mask density is 100% , the blend mode is normal,-can't think of where else to look for the solution.The brush works just fine when I am not in a layer mask.I updated the graphic card driver and also the wacom intuos driver. It has to be somewhere in photoshop CS6 as when I go into my older version photoshop, cs5, the mask opacity works works at 100 % opacity.
View 6 Replies View RelatedI have been working in PSP since PSP 7 so I am pretty familiar with the program. In PSP X4 when I go to adjust the opacity of a raster layer using the opacity slider on the layer palette toolbar. I click on it and I can't use the arrow keys to adjust the value. My arrow keys have no effect on the opacity slider at all. how I can get it working? It has never worked for me in PSP X4.
View 6 Replies View RelatedMy Illustrator CS2 is stuck in Outline mode, no mater how many times I press CTRL Y.
View 2 Replies View RelatedWhile creating various circular masks with a radial gradient from white to black, whenever I change the blending mode of the mask path Ai will throw me out of mask mode into layer editing mode. Since this is on a large document of ~2Gb file with multiple artbords for large poster & UI refresh speed is slow, this has become quite frustrating. Is this normal Ai behaviour?
View 3 Replies View RelatedI'm doing some painting with a lot of layers set to different blend modes. I find that every time I want to paint on one of these layers, I have to go to that layer, set the opacity back to 100, change the blend mode back to "normal" sample the color, then change everything back and continue painting. I realize I can save a swatch for the color, but it can get confusing when you're using subtle color differences on multiple layers. It seems like there should be a modifier key to the tool that samples the layers "true" color discarding opacity and blend mode.
View 3 Replies View RelatedI use a simple opacity mask on some equally simple (but large) artwork. It slows down the screen rendering so much as to make the file almost unworkable with the preview turned on.
View 1 Replies View RelatedSo, I'm having trouble with CS6 Ai and the artwork link with the Opacity Masks...for instance, I have placed a black-white image that I am using as a "grunge effect" mask over a group within my artwork. The problem I am having is that when I do one of two things (move the artwork itself or copy/paste the artwork into another file) the mask does not remain. I have the little link selected on the opacity mask that says "Link to artwork". I also tried "Expanding" the artwork to no avail. Am I missing a setting or something that would allow me to "finalize" a piece of artwork that has an opacity mask applied so that I can use it elsewhere?
I opened Ai on my office computer and tried an opacity mask and it worked as far as moving the artwork around within the same artboard. But, if I copy and paste the artwork to a new Ai file, the mask does not remain. Is this normal?
I'm in the process of drawing a site plan which contains buildings, roads and wooded areas. I want to draw roads which go through the wooded areas. I want both the road and the woods to be opaque except where the woods overlaps the road (I want the wood to be partially transparent at the overlap). Example of the effect I want is shown below. I don't get this effect when trying to use blending transparency modes. I'm sure it can be done with the opacity mask but I've tried all sorts of combinations and not managed to get this effect.
View 9 Replies View RelatedI am looking for a way to create an opacity mask through JavaScript. My program has the correct items selected, I just can't seem to find any documentation about creating an opacity mask. If I run the program as is, I just need to click one button ( "Make Mask") and the desired process is completed. Of course I would love to find a way to do this programmatically.
If I cannot access Opacity mask, is there a way to manually do this through grouping and blending or something?
Macbook
OS X lion
AI CS5
I created this logo in Illustrator. I made my basic shapes with a pen tool, put a vector grunge texture over the top of the shapes and then used "make opacity mask" to get my grunge effect. As you can see in the screenshot of my illy it is all very clean and looking like it should. When you open my other picture you can see that once I transferred (cmd+copy cmd+paste) the logo into PS you can now see faint lines of where the shapes used to be *highlighted in red*. I also tried placeing the .ai file in ps but got the same effect. I am using all pantone colors on the logo, both documents are set to 300 dpi....err I cant think of anything else. PS is in RGB, Illustrator is in CMYK (but using Pantone)
How do I get my logo to look as good in PS as it does in Ilustrator?
I'm using AI CS6;
I have a type object with an opacity mask created in one document. When I copy and paste this object into a new file the text is pasted without the opacity mask attributes. I can separately copy and paste the opacity mask object but then I face a tricky realignment to repeat.
I'm trying to resize a opacity mask by doing
transMaskItem.resize(
10, //scaleX,
10, //scaleY,
true, //[,changePositions]
true, //[,changeFillPatterns]
true, //[,changeFillGradients]
true, //[,changeStrokePattern]
0.1, //[,changeLineWidths]
)
This resizes the item, but it does not resize the item inside it. I tried similar command with the translation command
transMaskItem.translate(
100, //([deltaX]
100. //[,deltaY]
True, //[,transformObjects]
True, //[,transformFillPatterns]
True, //[,transformFillGradients]
True, //[,transformStrokePatterns])
and similar thing happened. The item gets moved, but the object inside it doesn't.
How do I resize or translate an opacity mask along with the items inside it?
this is how i usually duplicate a layer, by dragging and dropping to the new layer icon at the bottom of the palette. it is not letting me do that.
also, when i select a a single, or group of layers and move them around in the palette, i thought it used.
I have my blending mode set to 'NORMAL". When I paint in black on a layer mask it creates a transparent effect (not hide the image/pattern).
Since the upgrade this has affected both my pc and laptop versions. I've read through the forums and see a lot of folks having issues with the blending mode set inccorrectly but this seems different.
I have two objects intersecting each other on different layers. The object on the top layer I reduced the opacity for and the bottom layer which was previously hidden now is shining through. I do not want this to happen. I want the bottom layer to remain hidden beneath the top layer despite the lowered opacity. How would I accompish this simply? I have CS2.
View 6 Replies View RelatedLevel: Newbie OS: Win7 64bit Ia: Cs6
Once I use a Clipping Mask on a layer is the entire document covered in a mask?
And/or is all the artwork from then on inside the mask?
I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.
So, then I went and found a lesson that contained the use of a Clipping Mask.
I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)
However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??
So, I have been trying to abate my problem in lots of different ways.
I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.
I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it because I am not getting behind the Mask?
I'm working on a rather complex piece of artwork in Illustrator CC with the latest Mac OS, with several objects on each layer.
Whenever I click an object, its layer in the Layers palette auto-expands, pushing all of the main layers off of the edge of the palette. I then have to click the little arrow to collapse the layer so I can see all of the other layers and (quickly?) get to the one I need.
I am using a Magic Trackpad (don't ask) so this task is particularly arduous, as the cursor is often somewhat difficult to maneuver when attempting to target small UI elements. My display height is only 1050 px, so naturally I would rather not make the layer thumbnails any smaller (25 px.)
Is it possible to disable or defeat the auto-expanding behavior? Placed in bold
I just installed the X4 trial. I still have X3U installed but not open. I keep the layer palette open all the time.
I open an existing image and the current layers are displayed correctly. I open another image and it looks fine too. I then copy the 2nd image or a layer from the 2nd image and paste it as a new layer onto the first image. No matter which image is active, the layer palette continues to show the layers from the 2nd image until I close it. At that point there are no layers displayed in the layer palette at all; not even the background. If I do a paste as new image or even just create a new image, there is nothing in the layer palette then either. It doesn't change if I close and reopen the layer palette. The only way I have found to get the layers to display is to click on something outside of PSP X4 such as an open browser screen and then go back to PSP X4.
When I create a shape with a Pantone Color and then decrease the opacity in the color swatch palette, then go to my swatches palette and select "Select All Unused Colors" it highlights the pantone color being used in the file. In previous version, it never did this. This is for CS6. Any know fix for this?
View 2 Replies View Relatedworking on Layers and Layer Mask to obtain see through multiple Layers effect.Below is the description of my problem that I am looking forward towards resolution in this forum. I will be glad if some expert can guide me on this.
I have three layers of different colors as below.
Layer 1topmost layer) with Red color filled rectangle.Layer 2(below Layer 1) with Green color filled rectangle.Layer 3(bottom most layer, below Layer 2) with Blue color filled rectangle.When I erase something with brush on Layer 1 using masking Layer 1, it hollows the erased part and start showing the Green color of Layer 2 in hollow section of Layer 1.
What I want to achieve is that, when I erase Layer 1 using layer mask, then it should hollow Layer 1 as well as Layer 2 and should show Blue color in the hollow section of Layer 1.i.e: Hollow section made on Layer 1(using Layer Mask on Layer 1) should also be applied on Layer 2 so that Layer 1 and Layer 2 becomes hollow using eraser and I should see through Layer 1 and Layer 2 and Blue color of Layer 3 should be visible from the hollow section.
Though I can do this by Flattening Layer 1 and Layer 2 together so that it forms one single Image, and then when I hollow this Flattened image using Layer Mask, then it will show me Blue color. But I do not want to do this, as I would lose the flexibility to unhollow/recover the hollow region on both Layer 1 and Layer 2 independently in the future.
I just downloaded the trial version of paintshop pro x4. It worked for a while but the opacity sliders were extremely slow to respond. I thought this was my main problem but now every time I open the program it takes me to the register screen. When I register the screen goes white and nothing happens. If I close it the whole program closes. I have three emails confirm me for registering so I don't know why the screen pops up anymore... I was very happy to have more 16bit capabilities.
View 6 Replies View Relatedhow to change the colour of the selected layer in the layers pallete? It's quite annoying the way it is (Dull grey/blue) and sometimes hard to see what layer's selected?
I prefer the brighter blue on my other computer!
I'm trying to save a file that looks great in Photoshop and preserve it as a PNG. I'll create the image, simply "merge layers" and lose the transparency of it. How do I get my PNG to look like it does in photoshop.
The red background show through in photoshop originally...but then after "merge layers" or saving the PNG every way possible (or so I think)... the degree of transparency isn't preserved.Below looks great. (red bleeds through nicely, good transparency)
Now doesn't look so good. (all i did was merge layers and red doesn't bleed through properly anymore, same result when saving as png)
A lot of times I'll be working on multiple .psd files and as I'm moving between files I'll notice that all the layers & layer comps will disappear from their palette
[URL]
I can bring them back by doing something like clicking on the text tool and then clicking on a text item on the stage. It's annoying because it takes a couple of clicks for the palette(s) to redisplay.
Is this a bug or is there a setting in preferences that can control this?
When I select a layer, it is highlighted in grey (in the layers palette) and I am unable to edit it. My current process for making a layer editable is as follows: Select layer (highlighted in grey)Double click layer (opens "Layer Styles" dialogue box)Close "Layer Styles" dialogue boxLayer is now highlighted in blue and can be edited. I am currently running Photoshop CS5.1 on a windows machine which is using Windows 7.
View 2 Replies View Related