AutoCAD 2013 :: Dialog Box For MText Is Turned Off?
Jul 15, 2013The dialog box for MText is turned off. How do I turn it back on so I can edit text from the editor?
View 9 Replies
ADVERTISEMENT
AutoCAD 2010 :: Opening And Closing Mtext Dialog Box
May 29, 2012This is an annoying change from acad 2007 to acad 2011. Every time I start and end the Mtext command, as the dialog box opens and closes, the screen "shudders", or "jumps" a little. It is hard on my eyes. I have explored the MTEXTFIXED and the MTEXTED commands, but I can't get it to settle down.
View 1 Replies View RelatedAutoCAD 2013 :: Layers Turned Off Randomly
Feb 13, 2013I've had this issue with layers turning off randomly in the previous years; it has been fixed at some point when a service pack was installed. It is back now in Autocad 2013 and SP1 does not work.
Usually it is happening after the unisolate command. I assume that it is related with the unisolate function that does not work for all layers.
AutoCAD Inventor :: Use Autodesk 2013 With UAC Turned On
Aug 1, 2013I am trying to use Autodesk Inventor 2013 with UAC turned on.
Which is fine according to
[URL]
Inventor starts and works fine until we want to use Inventor Studio to render anything. The option is greyed out, if i remove the add-on and re-add it, the options becomes available but all of the options within Inventor studio are greyed out, so it's useless to me.
This is someone else's preview but it applies to this scenario.
[URL]
I can verify that under the same profile with UAC turned off it all works.
I need to leave UAC on and I need to be able to render using Inventor Studio.
AutoCAD 2010 :: Layer Is Turned Off But Table Is Still Turned On?
May 3, 2012The layer is turned off but the table is still turned on!
I’m wondering how come the layer in which the table exist is turned off while the table is still turned one!
The screenshot and the file are attached.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2013 :: DGN Convert To DWG - Diameter Symbols Turned To Question Marks
Dec 6, 2012After converting and .dgn file to autocad, the diameter symbols have turned to question marks, and some of the fractional inches turned to f. The text styles are listed as dgn003.shx which is missing? What is the best approach to fix this problem?
View 4 Replies View RelatedAutoCAD 2013 :: Direct Distance Entry - Dynamic Input Turned On?
Jan 10, 2013 Did 2013 change the way Direct Distance Entry is handled?
Say I want to start a line a distance of 3 from another line using Otrack and a running endpoint snap. Before, I could just hover over the existing line's endpoint, move the cursor in the right direction, and enter 3 on the keyboard. Now in 2013, I need to have Dynamic Input (F12) turned on to get this behavior. 2012 was not this way.
AutoCAD 2013 :: MEP 2013 Open Dialog Pulldown Broken
Dec 28, 2012Autocad MEP 2013 was working fine until I installed SP1 yesterday.
Now when type in open the dialog comes up (not a filedia issue). When I click the "look in" pull-down in the open dialog it goes blank and I am unable to browse any folders. I've tried rebooting.. Should I reinstall?
AutoCAD 2013 :: Change Mtext
Sep 20, 2013If I put a single line text and use it several times and then select them all I can change them in the properties all at ones. How do I do that with Mtext, if I select all and go to the properties they are opened one by one and you can change that.
Is there another way to do that as a single line text with the same.
AutoCAD 2013 :: 2014 / Why Does Object Snap Tracking Only Work With Dynamic Input Turned On
Sep 11, 2013I used object snap tracking for years.Since I upgraded to AutoCad 2014 why does object snap tracking only work with Dynamic input turned on?
Personally I do not like to work with Dynamic imput on, when I use object snap tracking with out DI turned on it doen't work right. Past versions worked fine. What do I do to get this back?
AutoCAD 2013 :: Adding Content To Mtext
Oct 30, 2013I am trying to add labels everywhere on my drawing to show the properties of my objects i.e. lines. (But the thing is, I need static text). This is because I need to be able to "distort" the drawing for legibility purposes but retaining the label information. This is a common drafting task in surveying. Solution A - add the labels and then convert then into text. (I don't think Autocad allows this) Solution B - add the mtext via script, but so far I am stuck on the text editor.
Here's what I have done so far. mtext 100,100 <-- I'll need to come up with some calculation to automatically place the text in the middle of the line. j mc r 96d08'27" 130,100 "186° 08' 27""" <-- how to you add the content of the mtext object?
AutoCAD 2013 :: Rotate The Mtext To Be Isometric?
Dec 11, 2013why when I rotate the mtext to be isometric in this drawing, the multiple lines become offset.
I created the mtext orthagonally like normal and used the rotate command 30 or -30 angles. Is there some other type of isometric rotate or something.
AutoCAD 2013 :: How To Match Mtext Properties
Sep 18, 2013I am using LT 2013. I cannot figure out how to match properties for text. I click on the 2 options and the box witdth, orientation, layer will match but not the style or font. I have tried using Quick Properties to select but have not had any success with this tool. Here is what I did:
Created a style and named it Arial.
Open the Quickselect box.
Apply to : click the box and select the various mtext objects.
Object Type: mText
Properties: Style
Operator: Select All
Include in New Selection Set is checked.
I click Ok and the objects are selected.
Next I go to the Properties Manager and change the style to the one I want to use, bu the text does not change. If Idoubleclick a text object it shows the correct style, but not the correct font. What have I missed doing?
AutoCAD 2013 :: CHANGESPACE Command And MTEXT
Aug 22, 2013I used the CHANGESPACE command today to bring a piece of mtext from model space to paper space. I had a background mask on the mtext and when it came into paper space, the height of the text box displayed right but the width stayed the same as it was in model space. I played around with column settings and also the WYSIWYG in editor settings. Nothing seemed to make difference. What am I missing? Using autocad 2014
View 7 Replies View RelatedAutoCAD 2013 :: Qleader Won't Attach To Mtext
Feb 22, 2013I have an older drawing that was created by somebody else that is chock full of bad CAD. I have to add some leaders to some text and I'm using the "QLeader" command. For some odd reason when I implement "QLATTACH" it won't attach the leader to the text.
Yes, I could recreate the text with the Qleader command but I'm trying to avoid having to do that because there is a lot of text. I'm not a fan of the rigidness of Mleader either so that is not an option.
AutoCAD 2013 :: Mtext Change Bullet Symbol?
Sep 19, 2012When I create Mtext with a Bullet list, I want to change the bullet to something of my own choosing, instead of the blakc dot. I've been looking into this before, but couldn't find a solution. Some time back, I received a drawing from someone else. See attachment. It contains a piece of Mtext wich uses an alternative bullet, in this case a hyphen. So it CAN be done. Only thing is, I can't figure out HOW they did it?
View 4 Replies View RelatedAutoCAD 2013 :: Attribute Text Larger Than Mtext
Sep 28, 2013I have made a dynamic block with attribute text. Everything works fine except the text comes out as larger than the mtext that it was created from. The text height & the width factor are the same since i created the attribute default by copying the mtext. when i close the block the text appears longer than the mtext it was created from.
View 2 Replies View RelatedAutoCAD 2013 :: Default Mtext Background Mask
Mar 4, 2013Is there a way to change the defaults?
Presently, the Fill Color defaults to "Red" and I have to check "Use drawing background color" every time. Certainly there must be a way to change this?
While I am at it, how about line space distance? Ditto on default justification, height, etc., etc.?
AutoCAD 2013 :: Create Attribute / Mtext In Block
Nov 10, 2013Is there a way to create an attribute or MTEXT in a block where part of it is User defined and the other part is constant?
e.g.
"AUTOCAD = 12345 LAYERS"
Where "AUTOCAD =" and "LAYERS" are constant
and
"12345" is the user defined part.
The reason why I would like this is because i want to be able to Middle Center Justify the text and if i were to create 3 separate texts then it wouldn't be good (2 texts and 1 attdef)
AutoCAD 2013 :: Global Editing Mtext Setting?
Sep 27, 2013sent drawing out to vendor, received back drawing where they had changed the width factor to .75. is there a way to globally edit all these mtext entities?
View 2 Replies View RelatedAutoCAD 2013 :: Mtext Not Showing Up In Paper Space
Jun 26, 2013I used "save as" to create a new drawing from an existing file that I did not have any problems with. For some reason, the mtext that already existed shows up in my viewports as well as new leader text, but any new mtext that I've added does not. The viewports were also already existing from the previous file. I have not changed any settings either!
All of the layers are on, and I've tried deleting and re-adding the viewports with no luck. All of the text settings are the same as the original file, and like I mentioned before I did not have any problems with the previous file.
AutoCAD 2013 :: Leaders Lost Vertices And Detached From Mtext
Jun 27, 2012While working in a drawing, I noticed that my leaders looked a little odd. They had ALL lost their verticies and upon further investigation I realized that the mtext is no longer attached to the leader (i.e. when you select text and grab the grip and move, the leader, text end, does not follow). Start a new leader command, and all is well with the new leader and text but the old leaders remain disconnected.
This is a new file originated in 2013. Audit was 0. Restarted AutoCad, checked a bak file and auto-save, no changes to mleader settings or attachments. I do no recall executing any out of the ordinary commands or changing settings.
AutoCAD 2013 :: Mtext Command Causing High CPU Usage?
Jun 19, 2013I'm currently using AutoCad 2013 on a Lenovo Thinkpad X230 with windows 7 64 bit. I have 8 gb of ram and a core I7 processor which seem up to the task for the rather small files I create. My issue is that whenever I initiate the mtext command or attempt to edit an mtext object, my cpu usage will jump from about 0 to 4% up to 20 to 30% and will stay at that level until I close the drawing. This causes the fans to run constantly and makes working a little more jumpy. I've tried removing AutoCad completely and reinstlling. I've tried loading up AutoCAd 2014 (and subsequently removing it) and now I'm back to AutoCad 2013 and the problem persists.
I'm assuming it has something to do with the computer or some other software that is running in the background. It's odd that it would only affect this one command. The computer is only 1 month old and I've done the hardware checks that Lenovo offers (no problems indicated).
AutoCAD 2013 :: Does Support Multiple Lines Of Vertical Setting On Mtext
Jan 15, 2013I guess it does NOT support it because it seems that it does NOT work properly. For example, in case of multiple lines of “Horizontal” setting, it works properly like followings. But in case of multiple lines of “Vertical” setting, it does NOT work properly like followings.
Configure of “Horizontal”:
ABC
DEF
GHI
Configure of “Vertical”:
ABC DEF GHI
In my perspective, it should go downward like followings.
In my “perspective” of Vertical”:
A
B
C
D
E
F
G
H
I
We are making application software for importing DXF file from AutoCAD. If AutoCAD does not support multiple lines of vertical setting on mtex, our software also should not support it, I think. I want to know the specification for multiple lines of vertical setting of AutoCAD.
AutoCAD 2013 :: Always Left Justify Option Under MText Options It Will Not Save
May 2, 2012When i type "qleader" and go to settings and then check the "Always left justify" option under MText Options it will not save. I go open up another drawing and have to do this again. Is there anyway for it to keep the setting?
View 4 Replies View RelatedAutoCAD 2013 :: Preventing Auto-stacking When Entering Mtext - 2014
Oct 10, 2013Recently installed AutoCAD 2014, and I'm currently trying to type the text:
TC1: 2/90 x 35 MGP10 studs with 4/2.8mm dia nails each end
It keeps stacking the 2/90 into the fraction 2 over 90. How can I turn auto-stacking off? I know I managed to turn it off for AutoCAD 2012, but now I can't find the option or system variable.
AutoCAD 2013 :: Referenced Text That Formats And Wraps Like Mtext Entity?
Aug 20, 2013I have a set of notes for a given jurisdiction that I need to show on mumltiple layout tabs within the same file. However, the notes need to change their width, number of columns, height, etc. for each layout tab to work with viewports and other drawing elements within each tab. My question is this- is there way using fields, blocks, rtext, something that will allow me to create one master copy of the note and basically have instances of the note on those other tabs that I can adjust the wrapping, height, columns etc.? I could just create a bunck of copies of the same note, but then if we get a comment from an AHJ about the notes, we need to make sure the comment is addressed in each instance of the note instead of just one master note. Is there way to do what Im asking, or is the technology just not there yet?
View 8 Replies View RelatedAutoCAD 2010 :: Convert Multiple Text Items To Mtext Without Combining Into 1 Mtext?
Jan 31, 2012I have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Combine Multiple Mtext Into 1 Mtext
Apr 16, 2009Tool to combine multiple pieces of Mtext into a single Mtext with paragraphs?
View 9 Replies View RelatedAutoCAD 2010 :: MTEXT Is Rotated When Try To Edit Any MTEXT
Jul 12, 2011Why is this happening?
The dwg was fine, then it crashed while changing from modle space to paper space...
When i recovered the dwg, EVERY MTEXT I try to edit becomes rotated vertically and stays that way when i close the edit box...
I do not recall hitting any buttons or making any keystrokes without my knowing...
Is there a way to get my text back to Horizontal and stay that way?
I tried setting the MTEXTFIXED to: 0, 1 & 2.
NONE of these options changed anything.
I NEED to have this fixed. more importantly, i need to know why this is happening sop that i can take steps to prevent this happening in the future...
I am currently working with the latest CAD available.
AutoCAD Civil 3D :: Combine Mtext Paragraphs Into One Mtext
May 21, 2013I have numerous MText paragraphs that I need to combine into a single piece of MText. I want the paragraphs preserved in the final piece. I've found some routines that can combine pieces of MText but I don't know if they preserve the paragraphs.I have DotSoft Toolpac but it doesn't seem up to the task. C
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB