Whenever I place a copy or paste from the clipboard AutoCAD freezes for about 5 -8 seconds and is very annoying. Time is money people. I know it's not a RAM issue. I don't have the problem with 2011 when I go back to it. What gives Autodesk? When is the next service pack due? This only happens with teh copy command
View 9 RepliesAutocad 2012 copy button freezes once i have finished copying and pressing enter. Just been installed 32 Bit
View 5 Replies View RelatedMy brand spanking new Acad2012 cannot copy anything to the windows clipboard...it freezes as soon as I hit enter after selecting the objects I want to copy. The only solution is to taskmanager and kill it.
I've had to go back to using my old AcadLT 2002 in my WindowsXP VM.
Basically my new Sing$2000 SW is useless unless I can copy blocks form one drawing to another.
I've applied this patch: [URL]
Since last week (4-19-2012) Our users have been expierencing cursor issues and freezes with Civil 3d 2012. Entering commands in the command line very slugish, pressing the shift key to select / de-select, trim, open osnap menu, ext.
We are running Win7pro6d bit quad core machines with 6gb ram, ATI FirePro V4800 (FireGL), Intel Xeon ES640 (2.67 ghz). AutoCAD Civil 3D(SP2) and all hotfixes installed.
This problem just started one week ago and It started with the cursor jumping all over the place when crossing objects. However; we now have very sluggish command line entry, 2 - 3 seconds after typing till it shows up, and cursors freezing when pressing the shift key for any reason.
My view is freezing in Architecture 2012 and when I close out of my drawing and open it again, the problem is fixed. What am I doing to make it freeze? It seems like it does it the most if I am in isometric. Also, I am working in a project manager and there are no Xref's attached.
View 4 Replies View RelatedJust got AutoCad 2012. Commands like Mirror and Copy which involve duplication (no problem with Move or Rotate, for example) will cause AutoCad to not respond for a few minutes. I believe it only is an issue with files brought forward from AutoCad 2000.
View 6 Replies View RelatedMy AutoCAD often will not copy & paste. It prompts for insertion point and when picked nothing appears. This happens on many different drawings. Windows 7.
View 2 Replies View RelatedWhen I copy and paste on Autocad 2012, it goes very slow.
I installed the service pack, I tried removing the layer filters and a few other fixes that are out there. The machine is powerful enough to handle the application.
I tried reinstalling the application and that didn't do anything. The DWG file that's on the network share is being used by other people without any issue, I'm the only one having this problem.
I have a problem where autocad will hang for almost 1 minute if I type in a misspelled command shortcut or misspelled command. For example if I try to type in "line" and I type in "linr" it will hang up for around 50 seconds. Is there a setting, system variable or key in the registry to stop autocad from looking for a command/shortcut that doesn't exist?
View 6 Replies View RelatedVersion of the CHSPACE.lsp command that has a "copy" option like the one from Intellicad?This version makes a copy of the selected objects first then moves them into the space you want, leaving the original objects alone in their original space.
View 3 Replies View Related- Dell XPS 8300 running Windows 7 SP1 64-bit with 12 GB of RAM
- AMD Radeon HD 6800 Series with updated drivers installed
- AutoCAD 2012 64-bit SP1
- ACAD Hardware Acceleration is ON
This hotfix is already installed.
This particular file (and a few others) has an issue whereby the computer pauses for a LONG time whenever an XREF is placed OR a copy/paste system command is executed (not the COPY AutoCAD command, but Ctrl+C/V). I have audited and purged the file; there are no audit errors. I also tried recovering the file and it made no difference.
I checked one of the problemmatic files on my machine (different machine but still AutoCAD 2012 and Win7) and the same file has the same issues.
New files do NOT have this problem. I have attached the file. Steps to recreate the problem:
1. draw a simple rectangle
2. try to copy/paste it with ctrl+c/v
3. this other machine and my machine both pause for 8-10 seconds
I'm confident that it's something in the file, but I don't know how to track it down.
When I use the copy with base point command in paper space and try to paste it into paper space of another drawing it seems to come in on a different axis or something. I can see the view ports as they are supposed to be however the text just shows as a line. It would be as if I were to put text in model space on top view and see it just fine then go to a front view and see just a line.
View 5 Replies View RelatedI am having PDS Ultimate 2012 and working on inventor. when i open a file or open a new template ribbon freezes means menu bar doesn't work properly,if i change the ribbon appearance it doesn't update also i cannot switch between the menu bar tabs and if i turn on the visibility of the datum planes it doesn't show on the screen.But when i refresh the windows everything works sometimes. i have installed SP1 and even repaired inventor.
System Config:
OS Name Microsoft Windows 7 Professional
System Manufacturer LENOVO
System Model 20079
System Type x64-based PC
Processor Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2300 Mhz, 2 Core(s), 4 Logical Processor(s)
Name AMD Radeon HD 6370M
Adapter Type ATI display adapter (0x68E4), ATI Technologies Inc. compatible
Adapter Description AMD Radeon HD 6370M
Adapter RAM 1.00 GB
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies View RelatedI have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
I just started using Inventor and it is very slow, freezes for a few seconds, and is non responsive. My AutoCAD Architecture 2012 works just fine.
View 6 Replies View RelatedI am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
View 7 Replies View RelatedIt happens during many different commands. The command itself doesn't seem to affect this problem. It doesn't always happen, but every so often, as I'm in the middle of a command, when I scroll past a contour line the program freezes. Sometimes it comes back to life after a few seconds of thinking, but sometimes it just sits there non-responsive forever.
Possible ideas:
-Contour Labels set to "Mask Contour Line Only"
-Dynamic Inputs on
-Selection Preview is on (but it's disabled for "When a command is active")
-Surface is shortcutted into the drawing
-Contours are from an XREF
Civil 3D 2013
64-bit HP Desktop - HP Z420
Intel Xeon CPU E5-1620 0 @ 3.60 GHz
24GB RAM
AMD Radeon HD 6570
Windows 7 SP1
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedI am in PS 7 (Yeah my knuckles drag a little but I can't afford to upgrade)
Everything works great until I try to save the image, then it freezes but not completely.
I can still move around but all of the menu items are dead and nothing works.
I have re installed 6 times and still the same.
I bought the Adobe CS5 master collection from a deal at my university. This error only started happening today, it was completely fine for the last few months up til yesterday, so it doesn't have anything to do with my specs probably.
Whenever I try to copy an image (ctrl + c), Photoshop would freeze. No error, no popup or anything, simply a freeze. The mouse cursor doesn't even turn into that loading icon, but nothing would be click able and any animations (like marquees) would stop.
Specs:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Intel i5
Also Photoshop CS5 has a lot of bugs when Flash CS5 is also open, causing a ton of crashes of either Flash or Photoshop. It's like these two programs don't like each other. I'm surprised this didn't go noticed during testing ?
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
This is the first time I experience a major problem with Revit 2012. I created a duplicate of an 8" concrete masonry wall for my student project. Then I selected the Edit option in the Structure to change the rendered material to concrete masonry. Suddenly the program freezes and crashes. A window pops up stating that Windows has detected a problem with Revit and must shut the program down. I've everything since my last save. As of now, I recreated a duplicate of the masonry wall I need and started drawing some of the walls for my project but I'm afraid to experiment with other materials. Background Information about my computer: I downloadeda free version of Revit 2012 student software to practice at home. I have Windows 7 64-bit, 6GB of Ram and Intel (R) Core i7 2.20GHz...(I checked all the software requirements before downloading the correct version of Revit 2012)
Do I have to uninstall the program and reinstall it again? Would the problem go away?
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
My copy of CS5 photoshop freezes when opening saved psds and currently I cant find my cd key for it (in case I need to reinstall) what should I do?
View 6 Replies View RelatedAutoCAD has been freezing randomly when I start it. It will get to the screen below (top image) and.... that's it. It stays that way and does not change. I have waited up to 15 mintues before restarting my computer as trying to start AutoCAD again doesn't seem to change anything.
I have learned that the Devices and Printers window will also be blank when this occures (bottom image). I can now predict when AutoCAD won't open by opening the Devices and Printers window first. I think the issue is unrelated to AutoCAD, rather the issue is my computer not refreshing the Devices and Printers. When CAD is loading the list of available printers it can't find any so it continues to look and.... never gives up.... I can't even print a PDF from Adobe Reader while the Devices and Printers window is in this state (this is actually how I found that the Devices and Printers window was blank). I have not tested to see if ALL applications fail to print, but that is a separate issue.
what is causing my computer not to open the Devices and Printers window successfully?
I am running AutoCAD 2011 64 bit, windows 7, Novell Network.
This happens on more than one document. A ueser showed me when she references in place, you just see the cursor spinning in a circle. Internet is NOT open, just Outlook.
View 4 Replies View Relatedwe have a new lab in our district with Autocad 2010 64-bit version installed on HP Compaq 8022 Elite SFF computers. There is 4 GB memory on the computers and a Quadro 400 graphics card. Autocad and Windows 7 64-bit have both been updated to the latest versions. The Autocad application locks up almost every time someone chooses the new document icon, or when they try to 'save as'. Sometimes when they choose to open a new document first, close that dialogue box, then try to choose the new document icon it works ok. But, for the most part, the application is unuesable. Some possible solutions we found online that don't work are to not use the Aero themes (we don't) and to not use Norton AV (we don't).
View 9 Replies View RelatedI'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
I am unable to use the file command open, new etc. I click on open and nothing happens no file box opens. As soon as you do anything else the program says not responding and you have to close it down. I can click on an autocad file in windows explorer and bring up the file this way but as soon as you try any file command such as save as the program freezes again. I am running windows 7 professional and the autocad LT 2011 64 bit program.
View 9 Replies View Related