I have a problem where autocad will hang for almost 1 minute if I type in a misspelled command shortcut or misspelled command. For example if I try to type in "line" and I type in "linr" it will hang up for around 50 seconds. Is there a setting, system variable or key in the registry to stop autocad from looking for a command/shortcut that doesn't exist?
View 6 RepliesWhenever I select a block or polyline in 2012, the program hangs for about 1 minute. This never happens when using 2010 on the same system. Obviously this can't continue.
View 3 Replies View Related When i type O for offset Command its not working its shows following error, i have attached the screen sort.
then i write full command "Offset" its working, like this many shortcut command are not working (Array, Reactangle, Fillet etc.)
how to create a Shortcut key "Alt + c" for "File - close" command? I like the same seeting as my Inventor seeting, and the Inventor is so easy to setup my Shortcut keys use "Tools-Customise-Keyboard".
View 9 Replies View Relatedknow if the shortcut command 'LAYOFF' can be edited. Edited to something shorter.
If so, were is this located to do so.
How do you change/edit command shortcut keys? For example, I would like to change the keyboard shortcut key for the command COPY to "C" instead of "CO" and CIRCLE to "CR" instead of "C" because I use the COPY command much more than CIRCLE and I'd like to maximize my drafting efficiency. In older versions of AutoCAD, you could open the acad pgp file and edit the info using "wordpad"; however, I have not been able to find that same file for this 2011 version.
My system is:
Gateway AMD Phenom II X4 820 quad-core processor 3 GHz
Windows 7 Professional 64-bit os
ATI Radeon HD 4250 graphics
640 GB hard drive
6 GB DDR3 memory
Whenever I place a copy or paste from the clipboard AutoCAD freezes for about 5 -8 seconds and is very annoying. Time is money people. I know it's not a RAM issue. I don't have the problem with 2011 when I go back to it. What gives Autodesk? When is the next service pack due? This only happens with teh copy command
View 9 Replies View RelatedWhat is the shortcut to switch to the selection tool when you are in the middle of typing? If I press "V" it types the letter out.
View 2 Replies View RelatedI would like to calabrate a tablet when i type cal i get this
View 9 Replies View RelatedHow can I get rid of the box attached to the cursor when I'm typing a command? I just want to type in the command line at the bottom.
View 2 Replies View RelatedWhen i am typing other Language like hindi, telugu, shortcut keys not working what should i do?
View 3 Replies View RelatedI keep my command line docked, but as I type a command as an example "LINE" it displays my typing where
my cross hairs are. I want it to display at the docked command line not at my crosshair location
I had a crash on exiting Inventor 2012 (fully up to date, service packs installed etc.) and since that crash I can't open any drawing (.idw) file in Inventor: it appears to hang, with no processor activity etc.
The same files open, view and print fine with Inventor View.
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
I am trying to type in notes or commands into AutoCAD and sometimes the wrong symbols appear.
Example:
I'm trying to type in 3'-6" and instead this show up 3è-6È. If this starts to happen, it will keep happening until I log out of my computer and log back in.
I have already checked my keyboard settings and it is set in English (Canada). This only happens in AutoCAD. Microsoft Office and all my other programs don't have this issue.
Since last thursday we have been having major issues opening files from our network share on server 2012. Everytime we go to open an .ai it hangs illustrator for about 15-20 seconds?
This has only started happening to all 3 machines we have
Our network is 1GB links, 2 of our computers are massive spec, i5's 16gb ddr3 1600, ssds......., other one slightly older ddr2 no ssd (problem exists on them all)
If we drag the file to the desktop then open, this is instant but reading from the server is being a nightmare!
I recently downloaded in my new computer the version of autocad 2011, but when I type letters for the command list to show, it doesnt!
View 1 Replies View RelatedIn previous versions I could create a flat polygon mesh by typing "3D" and have an option to create a planar mesh "M" X "N" by specifying the 4 corners along with M and N. I don't see a way to draw this mesh in 2012 without having to ID every vertices. This procedure is listed in the Legacy portion of Help, but I do not see a way to do it.
View 5 Replies View Relatedin the old autocad that i had for PC there was a command to re-select all selected items by typing P and then enter. I now have 2011 autocad for mac and can not figure out how to do the same thing.
View 3 Replies View RelatedIn 2007, I was able to select multiple polylines before typeing in PEDIT. When I was done with the command, I could then type in PEDIT and L for last and it would select the multiple polylines I had first selected. We just got 2012, and when I do L now it just selects one line. Can I change this?
View 7 Replies View RelatedThe options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies View Relatedlost ability to preselect lines when typing keyboard commands?
View 3 Replies View RelatedIs it possible to data shortcut a surface from c3d2013 into c3d2012?
I tryed it and it says that the surface is in the drawing but its not showing up.
I've tried changing the style and the layer but nothing works.
is it possible to switch on all layouts by one command (shortcut)?
View 5 Replies View RelatedIs this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedHas conquered the PUBLISH command hanging and failing to create a multi-sheet PDF?
Everything works the same as AutoCAD 2011, however, even though I have the "Prompt for Name" set I am not prompted for a file name and the publish progress symbol continues without a result.
I have no choice but to cancel the process.
I have AutoCAD 2010. When I start it up, and draw simple lines in the drawing editer and then try to save the drawing,
AutoCAD gets hug up in a loop, and stops working.
I have tryed the repair option and I have reinstalled AutoCAD serveral times, and it still has not repaired the problem.
I need AutoCAD 2010 to do work.
I want to know how to change subcommand shortcut
When I do a Polyline, after i done an arc section, I would like to be able to press "F" instead of "L" to do a line section...
Is there an easy way to do that or do I have to reprogram a new Polyline command in lisp with the subcommand shortcut that I would like? (would prefer to avoid it as sometime I have to work on LT)
The reason behind all of this is that I remapped all my command to keys that are on the left side of the keyboard ... it work really well and I almost never have to lift my left hand except for the case with the polyline... the L key is miles away ..
Right now I remapped a button on my mouse to "L" but its not as natural as just using the keyboard.
I am using Inventor Product Design Suite 2012. When I try to exit Inventor 2012 it just hangs there indefinitely every time. I have to use task manager to shut down Inventor. It doesn't matter if I use Inventor during that session or not. It was installed with all default settings and most current patches installed. It was also installed with administrator privledges and UAC turned off. This ia a clean install on a new hard disk drive.
The AutoCAD products in the bundle will hang sometimes on exit if plotting was the last command in that session.
My system is:
HP XW 8400
Dual Zeon 3.0 GHz CPU's
4 GB Ram
NVidia Quadro FX1800 Graphics Card
Windows 7 Professional with all current updates
All drivers are current
There are no anti virus software packages on this system. The hard drive still has 120 GB free space.
I want to know how to change subcommand shortcut
When I do a Polyline, after i done an arc section, I would like to be able to press "F" instead of "L" to do a line section...
Is there an easy way to do that or do I have to reprogram a new Polyline command in lisp with the subcommand shortcut that I would like? (would prefer to avoid it as sometime I have to work on LT)
The reason behind all of this is that I remapped all my command to keys that are on the left side of the keyboard ... it work really well and I almost never have to lift my left hand except for the case with the polyline... the L key is miles away ...
Right now I remapped a button on my mouse to "L" but its not as natural as just using the keyboard...
without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.