Has conquered the PUBLISH command hanging and failing to create a multi-sheet PDF?
Everything works the same as AutoCAD 2011, however, even though I have the "Prompt for Name" set I am not prompted for a file name and the publish progress symbol continues without a result.
I have no choice but to cancel the process.
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
I am on a Windows 7, 64-bit machine running Lightroom 5. I am having problems running certain Publish Services and also while trying to import from another catalog. On Publish Services - I am able to publish to a remote desktop but not to my own network. I have also been seeing issues with publishing to SmugMug (since before they updated their site).
Similarly, I am trying to merge some catalogs and when I import from another catalog, the process seems to hang about halfway through (I left it running all night long - the catalog is large but not THAT large!). The process did bring in what seems like most files so I wonder what I am missing.
I was facing problems with X5 soon after installing it, it actually doesn't installs properly. Somehow i have to End Process of installation and though find X5 in my Start menu of Windows XP SP2. Well the actual problem started when i recently tried to publish PDF for one of my client's brochure of 17 pages, X5 closes all of a sudden and i have to restart the whole process. At times it creates a PDF which then has errors and Acrobat Reader don't read it.At times X5 even gives Error while saving files. Then have to click Save till it actually saves the file.I uninstalled X5 thinking, there could be some corrupted files and re-installed, but all in vain..
View 1 Replies View RelatedOur company is setting up the Publish command to utilize the different title blocks within the Layout Tabs so we can create one file PDF(Multisheet). Our title blocks vary from sometimes been all portrait to on other occasions been a mix of both portrait and landscape layouts.
The issue that has arisen is the following example:
Layout 1 - Portrait
Layout 2 - Landscape
Layout 3 - Portrait
When creating the PDF using the publish command it doesn't not recognise the Landscape format therefore is not creating the Multisheet function or creating this function but the rotation of Layout 2 in the example is portrait. Where as when they are all Portrait sheets it creates 1 file which is what we are after.
i'm trying to create a routine, where i can select multiple windows in modelspace, and the plot a multisheet pdf.but I'm having trouble to create multiple pages, it only generates 1 page
I have modified sourcecode from Kean Walmsley:
[URL]
- this routine creates a single-page pdf with only the last selected window.
- the pc3-file I use is able to create multisheets because the original routine with paperspace works fine
- I think it has maybe something to do with the pi.Layout = lo.Id ?
<CommandMethod("mplot2")> Public Sub MultiSheetPlot2() Dim doc As Document = Application.DocumentManager.MdiActiveDocument Dim ed As Autodesk.AutoCAD.EditorInput.Editor = doc.Editor Dim db As Database = doc.Database Dim tr As Transaction = db.TransactionManager.StartTransaction() Using tr Dim bt As BlockTable = DirectCast(tr.GetObject(db.BlockTableId, OpenMode.ForRead), BlockTable) Dim pi As New PlotInfo() Dim piv As New PlotInfoValidator() piv.MediaMatchingPolicy = MatchingPolicy.MatchEnabled ' A PlotEngine does the actual plotting ' (can also create one for Preview) If PlotFactory.ProcessPlotState = Autodesk.AutoCAD.PlottingServices.ProcessPlotState.NotPlotting Then Dim pe As PlotEngine = PlotFactory.CreatePublishEngine() Using pe ' Create a Progress
[code]....
I have AutoCAD 2010. When I start it up, and draw simple lines in the drawing editer and then try to save the drawing,
AutoCAD gets hug up in a loop, and stops working.
I have tryed the repair option and I have reinstalled AutoCAD serveral times, and it still has not repaired the problem.
I need AutoCAD 2010 to do work.
Whenever I select a block or polyline in 2012, the program hangs for about 1 minute. This never happens when using 2010 on the same system. Obviously this can't continue.
View 3 Replies View RelatedI have several drawings on paperspace and want to publish them to PDF. I create a page setup for every sheet, and set publish to "PDF" but it did not work, but when I set publish to "plotter named in page setup" it publish but by one sheet on the time. I did try to do it in different ways, according posts before but no luck.
View 7 Replies View RelatedWe installed acad 2010 on a brand new computer with windows 7 64Bit.
Acad runs fine. Only frequently after closing a drawing the application crashes.
I've tried to reinstall acad but that doesn't fix the problem.
I have a problem where autocad will hang for almost 1 minute if I type in a misspelled command shortcut or misspelled command. For example if I try to type in "line" and I type in "linr" it will hang up for around 50 seconds. Is there a setting, system variable or key in the registry to stop autocad from looking for a command/shortcut that doesn't exist?
View 6 Replies View RelatedWhen I publish to PDF, is there a way to reduce the margins of the PDF? When I plot or publish to PDF, the program cuts off a large amount of my layout. I would like to set the margins the same as for my plotter.
View 9 Replies View RelatedWhen I publish a set of drawings in the background, the AutoCAD app keeps stealing focus of my open windows for each sheet that is processed. This seems to defeat the publish in background option. This was not an issue with 2008.
how to keep AutoCAD from stealing focus
Is it possible to publish alot of files to DWF/PDF and have a field or attribute in the filename.
E.G. A revision within a titleblock in a drawing?
"Open in viewer when done" is checked. I've unchecked it and rechecked it but the Adobe Reader does not launch after plotting in background completes. It does launch when plotting directly to the DWG to PDF.pc3 plotter. What am I missing?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
How to use Autodesk's DWG to PDF driver to plot multiple through publish? Whenever I try to plot more than one layout at a time I get a driver not found error.
View 2 Replies View RelatedI am using acad 2011, and have noticed that when using the publish command, for more than about 15 sheets, it always drops one sheet, and duplicates one, so I always come out with the correct number of pages, but 1 is gone and one has 2 copies.
View 3 Replies View Relatedwe are working on circuit drawings which are lengthy and we usually split the model into more than 100 layouts and publish pdfs.So we get 100 pdf pages. When we view the pdf, we need to scroll down to get into next page.
Can we create a pdf for complete circuit in single page, where we can scroll the page horizontally. This will work in viewing the page horizontally with continuity in the circuit.
Don't know if I need to check some other setting or this is just the way it is. When I use PUBLISH to plot a set of drawings, I can't do anything else on the computer. If I try to type in any other software, it is interrupted and the cursor moved away from the software. I am able to type maybe a couple letters in any software, then the cursor goes away, put cursor back, type 2 letters, repeat, interrupt, cursor back, 2 letters etc..
Windows 7 PRO
Autocad LT 2012
While publishing several drawings I am having problems creating Single Sheets, (a customer preference). Even though I have the Multi-sheet/Single-sheet setting set to "Single" Autocad still creates a multi-sheet PDF. I am using Autocad 2012.
View 3 Replies View RelatedIf I open the drawing and then run the publish command the Status shows "No errors". If the file is not opened and I use the add sheets button to add the exact same file, it shows an error in the Status of "Layout not initialized".
View 3 Replies View RelatedI have been using autocad for 20 years plus. I've never really had to publish anything to DWF. We have a client that wants DWF's instead of PDF's. I have a 3D model with views in paperspace within viewports. I cannot for the life of me figure out how to plot these drawings to DWF in Black and White. I have tried everything. I am using monochrome.ctb plot style. The border and all border elements are plotting B/W but everything in the viewport is plotting whatever color it is in the VP. This is driving me nuts. Never liked this DWF format. If I plot to a PDF it all comes in B/W.
View 4 Replies View RelatedI installed AutoCad 2011 on a new computer Win7 Prof Off OS. I'm trying to make single pdfs for each dwg that I have. No matter what I select it keeps making one multi page file of all my dwg sheets.
I've tried going under Publish Options > General DWF/PDF and I've tried both Multi-sheet file and Single-sheet file getting the same results. I have the same problem whether I use Dwg to Pdf.pc3 or my Adobe.pc3 driver.
Publish comment doesn't work correct. Even if I set multi-sheet file and prompt for name, autocad doesn't ask me about file name and makes single sheet files.
View 9 Replies View RelatedWhen I created our custom profile ".arg" file, with two custom workspaces along with the OTB workspaces. I set the Auto Publish Settings to publish to PDF on Exit. With 50+ users, each can create thier own workspace for thier liking.
I have some users that like the feature, and others that do not. The ones that do not like the feature, want to turn the feature off.
So the question is if, under each individual workspace, we uncheck the Auto Publish feature, then save that workspace, is the feature turn off for JUST that workspace? Or does it cut the feature off for all workspaces?
AutoCAD 2012 / Inventor 2012
I have a drawing with multiple layouts which is of a road plan and profile in 2 view ports.
When I publish the multiple drawings to DWF the 2nd viewport with the profile in it is completely black, but when I plot to DWF a single layout, it works fine which I don't understand. Surely the publish command publishes to DWF with the same settings as when you do a single plot to DWF, no?.
I have attached an example of the publish result.
When a drawing is printed using PLOT the drawing is printed fine. If I batch plot (or publish) it prints all the frozen layers of the xref and also prints the layers as assigned by the XREF drawing and not the new colours I have specified for this drawing.
View 1 Replies View RelatedWe are experimenting with turning on the auto publish to PDF on prompted save. (Options/Plot and Publish tab) This will be a very nice tool since we create PDF's of every dwg. that we create. However, I am having trouble locating the settings that control the page layout in this feature (The titleblock is not centered and is getting cut off when PDF is generated) but, When I preview the "standard" way of plotting to PDF, the drawing is fine. I assumed the settings would be one in the same?
View 3 Replies View RelatedI've got a user that has his page setups setup correctly and set current, but when he goes to the publish command it only grabs the model space. even if he checks the "Initialize Layout" (and unchecks "Initialize Model") option in the context menu, it doesn't stick...
I have him rebooting now (we tried closing ACAD (and made sure the process had stopped) and then restarted ACAD and it still wasn't working)
I am having trouble using the publish command when I set the plotter to a 22x34 sheet. We are able to print to an actual plotter just fine at that size, but when we try and make a pdf set at that size, it just errors out.
The error I get is
"ERROR: The current device does not support the requested media size."
I am having an issue with saving the merge control variable to "Lines Merge" under the Sheet Set Publish Options. I have full rights to the sheet set file, and can change the variable to make a plot, but it gets reset everytime I close program and reopen.
View 2 Replies View Related