AutoCAD 2010 :: Publish To DWF Results In Large Black Areas
Mar 16, 2012
I have a drawing with multiple layouts which is of a road plan and profile in 2 view ports.
When I publish the multiple drawings to DWF the 2nd viewport with the profile in it is completely black, but when I plot to DWF a single layout, it works fine which I don't understand. Surely the publish command publishes to DWF with the same settings as when you do a single plot to DWF, no?.
I have attached an example of the publish result.
View 2 Replies
ADVERTISEMENT
Apr 21, 2013
Whenever I drag an image off the web into Photoshop it seems like some colors gets pixels, large black areas inside the image. This only occurs in 8-bit mode, when I turn the image to 32-bit it show all colors correctly. But in 32-bit mode I cannot save to web. If I finish the image in 32-bit and then downgrade it to 8-bit, the black parts return.
What I see in 8-bit mode:
What it should look like, and does in 32-bit mode:
If you need any technical specs apart from knowing that I use Photoshop CS5,
View 3 Replies
View Related
Feb 23, 2012
I have been using autocad for 20 years plus. I've never really had to publish anything to DWF. We have a client that wants DWF's instead of PDF's. I have a 3D model with views in paperspace within viewports. I cannot for the life of me figure out how to plot these drawings to DWF in Black and White. I have tried everything. I am using monochrome.ctb plot style. The border and all border elements are plotting B/W but everything in the viewport is plotting whatever color it is in the VP. This is driving me nuts. Never liked this DWF format. If I plot to a PDF it all comes in B/W.
View 4 Replies
View Related
May 31, 2013
I need to publish multiple files that are in the Named Plot Style Mode in Black and White instead of color. Is there a way to do that in 2012? In previous versions it wasn't a problem. Short of opening every single file and doing the convertpstyles I can't seem to figure out a quick way to do it. Is there an option somewhere that I can change to make the Publish use the Color Plot Style Mode so that it will recognize the monocrome.ctb file?
View 9 Replies
View Related
Jan 29, 2013
In the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies
View Related
Dec 12, 2011
I've got an issue which is preventing me from being able to PUBLISH multiple DWGs to PDF.
I can successfully PUBLISH multiple DWGs to hard copy with no problem - and it is very easy.
However i seem to be missing something when trying to PUBLISH to PDF.
Ive tried creating a 'Page Setup' which nominates a PDF writer (Adobe PDF or PDFCreator) and the printing device, and that will only work for 1 of the specified DWGs. I have also tried specifying 'PDF' in the "Publish to:" pulldown in the PUBLISH dialogue box - which returns no result. The PUBLISH dialogue box closes and nothing else happens.
View 9 Replies
View Related
Oct 12, 2012
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
View 1 Replies
View Related
Jun 17, 2011
1. Black drop shadow does not appear black when Publish to PDF
2. The object beneath the drop shadow will appear as show below:
I've tried to convert the drop shadow to bitmap but the result is same.
View 15 Replies
View Related
Jul 10, 2009
I've been trying to calculate large areas using fills but I keep encountering a problem with some of the hatches not showing an area and thus ruining my calculation. I've found out that I can correct it by removing certain crossing point between lines as is shown below in my screenshots. Is there any reason this is causing a particular problem and can I avoid it to save me having to go back over my hatches checking for these malformed hatches?
area.jpg
altered.jpg
View 8 Replies
View Related
Jul 30, 2013
My plans are printing fine, but elevations and any 3d view print with the majority of the drawing missing. I'm guessing it has to do with the raster images used on walls for textures, but besides that I'm stumped. I'm trying to print in realistic view, because of the material textures that need to show up.
I've turned on sun lighting, as well as tried various PDF printers, but no change. When I go to the print preview it appears to preview incorrectly. The file is pretty small as the project is just a modest house. Pretty much all the settings are 'right out of the box'.
When I shift back to just 'Hidden line' mode and look at it in print preview it seems to print the drawing fine, but then the titleblock and firm logo dissapear. The actual PDF when printed is fine.
I'm working on revit 2013, in WIndows 7 inside parllels on a macbook pro.
View 1 Replies
View Related
Mar 11, 2013
I have a question about object sizes on Mudbox
I need to model an factory area, witch is 350 meters x 200 meters
Is there a way for mudbox do model in such large scales???
View 1 Replies
View Related
Sep 22, 2011
I have been trying to print to my local windows printer (monochrome laser) and to a pdf file but cannot seem to get all of my lines black. Different colors, by layers, produce a greyscale arrangement of linework. I have tried changing the plotstyles to the various available plotstyles: Monochrome.stb, Monochrome.ctb and Autodesk-MONO.stb, but have not had any success. All are printing the same.
Ideally I would like to set most linework to black and be able to have shaded areas and some linework in a grey tone when needed.
View 8 Replies
View Related
Feb 8, 2013
I have a scene showing a wide plain heading towards low mountains. The perspective is such that the mountains appear to be about 1/2 a mile away, across a basic southwest desert plain covered by dry-looking yellow grass, sagebrush, some cactus, etc.
My problem is how best to cover the plain with grass so that it's covered well enough to look realistic. Paint Effects works beautifully, and eventually I'll place clumps and varieties throughout, but covering such a large area by painting short grass all over is time consuming. All I've seen by searching online suggests using Paint Effects to paint in grass, which works, but it's extremely time consuming. If the only way is to spray a little bit then convert it to polygons, watch the coverage drop due to the polygon count, then repeat the process...something tells me this can't be the most efficient way.
How to more quickly cover a large area with decent looking grass. I suspect a nice combination of the right surface texture underneath Paint Effects might do the trick,.
View 1 Replies
View Related
Apr 7, 2012
When I try to publish to Flickr from LR4 after about an hour I get error saying file to large. Only published about 17 out of 600 images. If I try to restart fails quickly. How do I publish all of these to Flickr.
View 8 Replies
View Related
Oct 14, 2012
I am preparing some water paper decal graphics which will go onto a black surface. I have made decals using either a solid yellow or a gold uniform fill with CD6 & RGB color model
I have increased the printer (Canon Pixma 860) intensity to the max.The end results don't seem to pop on the black background surface like they do on the white decal paper background.
View 10 Replies
View Related
Mar 15, 2012
I am running CorelDraw x5 Graphics Suite on Windows 7. When publishing to pdf on even simple corel files it is saving a pdf size of over 1.5GBs! The screenshot below is a 57 page corel file ALL text and vector with NO bitmaps images. Publishing to pdf creates a file size 1.59GBs. Is there a patch that is out that resolves this issue?
View 12 Replies
View Related
Apr 12, 2013
I just purchased a new computer which is running Windows 7 and has an AMD Radeon graphics card. I loaded my Photoshop CS4 on this new computer. I previously had CS4 loaded on a Dell Inspiration laptop that died. I never had any problems with CS4 on my laptop. I have always used a working color profile of sRGB IEC61966-2.1 as that is the color profile that my digital camera uses. Now when I open photos in CS4 using this color profile, there are black pixelated areas on many of the photos. I can get rid of this in two ways, 1. by dropping the saturation down to around -8 or 2. changing my working space profile to Adobe RGB 1998 and then converting the documents color profile to the working space. I have to convert every photo that I bring in to Photoshop.Is the graphics card not compatible with CS4?
View 1 Replies
View Related
Feb 1, 2013
While in model space anything I insert, copy/paste or bring into model space looks squashed compared to the original data. It's like the Z axis is rotated. As it sits all the original data in model space looks fine or "flat" as it should.
When measuring the inserted squashed object it's giving me the correct dims but because it's squashed 18" looks like 12", if that makes any sense. Also if I copy/paste the original data in model space into another new template it then looks squashed.
Is there a system variable or setting just for that dwg that could have been changed?
View 2 Replies
View Related
Aug 1, 2012
My insert script always plots different results(off by a little bit, but not much)... unless I manually paste them line by line which complete defeats the purpose of having a script.
(command "-insert" "RK_183" "8581,10812,0" 1 1 90)(command "-insert" "RK_183" "8581,10949,0" 1 1 90)(command "-insert" "RK_183" "8916,10812,0" 1 1 90)(command "-insert" "RK_183" "8916,11096,0" 1 1 90)(command "-insert" "RK_183" "8916,11234,0" 1 1 90)(command "-insert" "RK_183" "8581,11096,0" 1 1 90)(command "-insert" "RK_183" "8581,11234,0" 1 1 90)(command "-insert" "RK_183" "8581,11381,0" 1 1 90)(command "-insert" "RK_183" "8581,11518,0" 1 1 90)(command "-insert" "RK_183" "8916,11381,0" 1 1 90)(command "-insert" "RK_183" "8916,11518,0" 1 1 90)(command "-insert" "RK_183" "8916,11665,0" 1 1 90)
[code]...
View 3 Replies
View Related
Jun 2, 2011
In some drawings the viewports automatically display viewport objects when I copy them and some they do not. There must be a systems variable and I searched through the systems variable tool in the Express tools and couldn't find it. How to get consistent results when copying viewports.
View 6 Replies
View Related
Apr 17, 2012
I have a question: ¿Which scientific calculation's method usually autocad utilize to calculate areas?
View 1 Replies
View Related
Mar 14, 2013
I am having a huge issue with Photoshop CS5.5. The gradients and colors are acting crazy. When I bring in a image with a gradient it gets black spots all in the dark areas. Even when I use the default gradient selection this is what happens. When I bring in a picture that should have a white background it turns to black. Now apparently, when I save it out as a JPEG saves correctly without the black line or messed up gradients. So it seems to only be an issue when I am working in Photoshop, the gradients appear messed up. What is wrong with my display?
View 2 Replies
View Related
May 13, 2012
I want to take a B & W photo and add color to specific areas? How do I go about doing this?
View 5 Replies
View Related
Aug 27, 2013
For no apparent reason I am opening images where there would be a blue background, and getting blocks or streaks of black pixels. Using CS 5. How do I prevent or correct?
View 3 Replies
View Related
Oct 31, 2012
I inserted a dwg created with Autocad LT 2004 into a MS Word 2010 document using: Insert | Object | Create from file. The result is the desired drawing is inserted but, in addition, the template used to create the dwg is also included and visible as if it is an additional layer. How to keep this from happening?
View 4 Replies
View Related
Sep 21, 2013
I have a scan of a couple-hundred year old document. The background is light brown due to age. How can I best make the browned areas white and preserve/improve the black type? Getting a white background by playing with levels, brightness / contrast seems to result in worse black type.
View 2 Replies
View Related
Mar 5, 2012
There's probably a simple explanation, but if I have a file open for a long time in Photoshop the blacks will start to appear oversaturated/blocked up. If I close and reopen file it looks normal again.
I am using OS X Lion, Photoshop 5, Apple 30" Cinema display. My monitor is calibrated with a i1 Display by X-Rite and resets according to amibent light.
View 4 Replies
View Related
Feb 27, 2013
I have several drawings on paperspace and want to publish them to PDF. I create a page setup for every sheet, and set publish to "PDF" but it did not work, but when I set publish to "plotter named in page setup" it publish but by one sheet on the time. I did try to do it in different ways, according posts before but no luck.
View 7 Replies
View Related
Jan 18, 2008
When you print a file from corel you have the option to choose always overprint black, but when I make a pdf with publish to pdf in the advanced tab I have only the option to preserve document overprint, and the black text is knocked out. Is there a solution to that, other then manually setting black text to overprint fill in corel?
View 11 Replies
View Related
Sep 20, 2013
I have a big drawing generated from a database with .NET containing about a 1000 parcels. Each vertex of each parcel has a label as MText. there are areas where these labels overlap partially. Is there a command to cycle through all areas where the overlapping occurs to speed up the cleaning process of the drawing?
View 2 Replies
View Related
Jan 21, 2013
I received a cross section file that was created in Micro Station and need to calculate the cut and fill of the project. There is no way to get the 3D files the cross sections were created from. Everything in the file is exploded and flat.
I was going to hatch under and above the existing grade to find the cut and fill and then thought about the scale of the cross sections. In model space the cross sections are 1=1 H and 1=10 V. When I do a hatch and get the area it is giving it to me way high. If I just divide by 10 I don't think that is right either since the hatch areas are very irregular.
Scale the cross section vertical down by 10 and don't change it horizontally. I don't know if this is possible.
Somehow set the horizontal and vertical scale and hatch above and under to get the areas. I don't know if this is possible either.
View 1 Replies
View Related
