"Open in viewer when done" is checked. I've unchecked it and rechecked it but the Adobe Reader does not launch after plotting in background completes. It does launch when plotting directly to the DWG to PDF.pc3 plotter. What am I missing?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
I have several drawings on paperspace and want to publish them to PDF. I create a page setup for every sheet, and set publish to "PDF" but it did not work, but when I set publish to "plotter named in page setup" it publish but by one sheet on the time. I did try to do it in different ways, according posts before but no luck.
View 7 Replies View RelatedWhen I publish to PDF, is there a way to reduce the margins of the PDF? When I plot or publish to PDF, the program cuts off a large amount of my layout. I would like to set the margins the same as for my plotter.
View 9 Replies View RelatedWhen I publish a set of drawings in the background, the AutoCAD app keeps stealing focus of my open windows for each sheet that is processed. This seems to defeat the publish in background option. This was not an issue with 2008.
how to keep AutoCAD from stealing focus
Is it possible to publish alot of files to DWF/PDF and have a field or attribute in the filename.
E.G. A revision within a titleblock in a drawing?
How to use Autodesk's DWG to PDF driver to plot multiple through publish? Whenever I try to plot more than one layout at a time I get a driver not found error.
View 2 Replies View RelatedI am using acad 2011, and have noticed that when using the publish command, for more than about 15 sheets, it always drops one sheet, and duplicates one, so I always come out with the correct number of pages, but 1 is gone and one has 2 copies.
View 3 Replies View RelatedHas conquered the PUBLISH command hanging and failing to create a multi-sheet PDF?
Everything works the same as AutoCAD 2011, however, even though I have the "Prompt for Name" set I am not prompted for a file name and the publish progress symbol continues without a result.
I have no choice but to cancel the process.
we are working on circuit drawings which are lengthy and we usually split the model into more than 100 layouts and publish pdfs.So we get 100 pdf pages. When we view the pdf, we need to scroll down to get into next page.
Can we create a pdf for complete circuit in single page, where we can scroll the page horizontally. This will work in viewing the page horizontally with continuity in the circuit.
Don't know if I need to check some other setting or this is just the way it is. When I use PUBLISH to plot a set of drawings, I can't do anything else on the computer. If I try to type in any other software, it is interrupted and the cursor moved away from the software. I am able to type maybe a couple letters in any software, then the cursor goes away, put cursor back, type 2 letters, repeat, interrupt, cursor back, 2 letters etc..
Windows 7 PRO
Autocad LT 2012
While publishing several drawings I am having problems creating Single Sheets, (a customer preference). Even though I have the Multi-sheet/Single-sheet setting set to "Single" Autocad still creates a multi-sheet PDF. I am using Autocad 2012.
View 3 Replies View RelatedIf I open the drawing and then run the publish command the Status shows "No errors". If the file is not opened and I use the add sheets button to add the exact same file, it shows an error in the Status of "Layout not initialized".
View 3 Replies View RelatedI have been using autocad for 20 years plus. I've never really had to publish anything to DWF. We have a client that wants DWF's instead of PDF's. I have a 3D model with views in paperspace within viewports. I cannot for the life of me figure out how to plot these drawings to DWF in Black and White. I have tried everything. I am using monochrome.ctb plot style. The border and all border elements are plotting B/W but everything in the viewport is plotting whatever color it is in the VP. This is driving me nuts. Never liked this DWF format. If I plot to a PDF it all comes in B/W.
View 4 Replies View RelatedI installed AutoCad 2011 on a new computer Win7 Prof Off OS. I'm trying to make single pdfs for each dwg that I have. No matter what I select it keeps making one multi page file of all my dwg sheets.
I've tried going under Publish Options > General DWF/PDF and I've tried both Multi-sheet file and Single-sheet file getting the same results. I have the same problem whether I use Dwg to Pdf.pc3 or my Adobe.pc3 driver.
As an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
started a new job after being out of the biz for a couple of years and would like to load some sweet dvb files that I grew accustomed to in my prior life. I can appload my .lsp files with the the best of them but these dang dvb's have me wishin' they were .lsp! The dvb's were at one time lisp routines but were turned into dvbs by a power user somewhere along the line. What's my avenue for success at ever getting to use these sweeties again?
View 9 Replies View RelatedPublish comment doesn't work correct. Even if I set multi-sheet file and prompt for name, autocad doesn't ask me about file name and makes single sheet files.
View 9 Replies View RelatedWhen I created our custom profile ".arg" file, with two custom workspaces along with the OTB workspaces. I set the Auto Publish Settings to publish to PDF on Exit. With 50+ users, each can create thier own workspace for thier liking.
I have some users that like the feature, and others that do not. The ones that do not like the feature, want to turn the feature off.
So the question is if, under each individual workspace, we uncheck the Auto Publish feature, then save that workspace, is the feature turn off for JUST that workspace? Or does it cut the feature off for all workspaces?
AutoCAD 2012 / Inventor 2012
I have a drawing with multiple layouts which is of a road plan and profile in 2 view ports.
When I publish the multiple drawings to DWF the 2nd viewport with the profile in it is completely black, but when I plot to DWF a single layout, it works fine which I don't understand. Surely the publish command publishes to DWF with the same settings as when you do a single plot to DWF, no?.
I have attached an example of the publish result.
When a drawing is printed using PLOT the drawing is printed fine. If I batch plot (or publish) it prints all the frozen layers of the xref and also prints the layers as assigned by the XREF drawing and not the new colours I have specified for this drawing.
View 1 Replies View RelatedWe are experimenting with turning on the auto publish to PDF on prompted save. (Options/Plot and Publish tab) This will be a very nice tool since we create PDF's of every dwg. that we create. However, I am having trouble locating the settings that control the page layout in this feature (The titleblock is not centered and is getting cut off when PDF is generated) but, When I preview the "standard" way of plotting to PDF, the drawing is fine. I assumed the settings would be one in the same?
View 3 Replies View RelatedI've got a user that has his page setups setup correctly and set current, but when he goes to the publish command it only grabs the model space. even if he checks the "Initialize Layout" (and unchecks "Initialize Model") option in the context menu, it doesn't stick...
I have him rebooting now (we tried closing ACAD (and made sure the process had stopped) and then restarted ACAD and it still wasn't working)
I am having trouble using the publish command when I set the plotter to a 22x34 sheet. We are able to print to an actual plotter just fine at that size, but when we try and make a pdf set at that size, it just errors out.
The error I get is
"ERROR: The current device does not support the requested media size."
I have an intermittent issue with AUTOCAD 2012 on new 64bit W7 PCs.
The issue is that sometimes when first opening AutoCAD it stops at the splash screen and says loading template at 0%.
We have to stop ACAD.exe and restart the PC, sometime it'll be fine after a single re-boot, this morning it took 3.
This is happening (intermittently) on 3 of 7 new Dell PC's.
If it was an issue with the ACAD.dwt, which we're loading from a central location and have been using for years, I would have thought it would be a consistent problem, not an occasional one.
If I have an image within in an XREF (lets say logo in a titleblock), when I open my drawing I get a image frame with the file path listed in its place. If I print, it only prints the frame and file path.
The way that this is fixed (temporarily) is If I reload the xref and image for each xref containing an image. Upon reopening the drawing, the same problem persists. I need to reload the xref/image every time I open the file if I want the logo to print on my drawing.
Im trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies View RelatedI created a new work space and under my new workspace shows only the Express Tools. How do I load all the others? If I go into any of the default workspaces all the tabs shows.
View 1 Replies View RelatedA consultant sent us their titleblock along with the true type font. I copied the font and pasted it into my AutoCad 2010 fonts folder. I noticed that the title block text style is "standard." When I try to set the font in standard to the true type font, the font does not appear in the list.
View 4 Replies View Relatedwhy our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies View Relatedi have upgrade to 2012 version and try to upload personal.cui menu, but it not shown on the pull down menu.
View 1 Replies View Related