I am using acad 2011, and have noticed that when using the publish command, for more than about 15 sheets, it always drops one sheet, and duplicates one, so I always come out with the correct number of pages, but 1 is gone and one has 2 copies.
View 3 Repliesin acad2008 when publishing I had the option to choose model space, paper space or both to populate the publish.
Has this option been eliminated?
I only want layout tabs to populate my publish.
I'm having an intermittent issue with my publish command. So far the pattern seems to be on drawings with a larger number of sheets (last one was 15, this one is 7). When I get the publish dialog box, I'll set the number of copies to however many I need but it ends up only printing one set. It doesn't happen every time. Just with these two drawings so far. They have nothing to do with each other and haven't shared any data. The only similiarity is that they're both older projects that were started some years ago on previous CAD versions.
View 7 Replies View Relatedwhen I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
When using the publish command to print multiple sheets from Civil 3D, it will sometimes fail to print certain objects. Usually it is a profile. Occasionally it drops some of the pipes. When we plot sheets individually it plots fine. Only C3D objects are affected, not regular ACAD objects. It only seems to be pipes and profiles. This problem is sporadic. It may be drawing specific but the sporadic nature of it makes it hard to say for sure.
The way we set up our drawings, profiles and pipes are almost always DREF's. This appears to be related. If we creat a test drawing with everything in one drawing publish works fine. If we then seperate into two drawings, DREF the data, and then publish again, the pipes disappear (from the plot not the drawing itself).
The same problem occurs on two different printers so I don't think it's driver related.
It started happening when we were on 2008. I thought maybe it was just that version. However, it seems to have gotten worse in 2009.
When we publish we are always asked if we wish to save the current list of sheets.
See attached screenshot.
One of my users no longer gets this option.
Every time he publishes the program goes directly to the Save List As dialog box so he can name/save a .DSD file. He no longer gets the option of a box asking him if he wants to save the current list of sheets.
My guess is some variable got changed that has removed the option of being prompted about saving the .DSD file.
P.S. We're using AutoCAD 2012.
Is there anyway to create 1 PDF from a multi-sheet AutoCAD drawing other than merging several PDF's together. I can create a PDF of a multi-sheet Inventor drawing in one step?
View 4 Replies View RelatedI would like to get a dwg file of the metric sheets, A0, A1, A2, A3, A4. I have seen these in the past, as a template in autocad but can't find them in AutoCAD2012. I need them with titleblock intact as I need to copy their format, and I would find it easier to just rearrange an existing sheet. I need the A4 as soon as possible.
View 2 Replies View RelatedWhen I try and import layouts as sheets, the "Prefix sheet titles with file name" is subdued. (AutoCAD MEP 2012)
View 3 Replies View RelatedI have to two sheets layed out in one drawing in Auto CAD 2012, a tilte sheet and the building plan. How can I send that to one PDF file (one PDF file with both sheets) using the 'DWG to PDF.pc3' option?
View 5 Replies View RelatedI have several drawings on paperspace and want to publish them to PDF. I create a page setup for every sheet, and set publish to "PDF" but it did not work, but when I set publish to "plotter named in page setup" it publish but by one sheet on the time. I did try to do it in different ways, according posts before but no luck.
View 7 Replies View Relatedcreating text attribute across several sheets?
View 4 Replies View RelatedWhen I publish to PDF, is there a way to reduce the margins of the PDF? When I plot or publish to PDF, the program cuts off a large amount of my layout. I would like to set the margins the same as for my plotter.
View 9 Replies View RelatedWhen I publish a set of drawings in the background, the AutoCAD app keeps stealing focus of my open windows for each sheet that is processed. This seems to defeat the publish in background option. This was not an issue with 2008.
how to keep AutoCAD from stealing focus
I am using Rel. 2012. I would like to hear what some of the practices are regarding a general note used on multiple plan sheets. What I have is a plan set with 150 sheets. On each sheet a general note is required that likely will be revised by agencies reviewing the plans. Currently I have a base cadd file with the note and I x-ref that drawing into each sheet.
View 4 Replies View Related When drafting either in model space or paperspace, eventually either the command line disappears completely "OR" the command line area increases and prevents me from seeing the tab sheets for accessing paperspace "OR" the mouse arrow gets stuck outside of the drawing area. This is the most non-productive program here after all these years (the worst version ever)
I either have to do one of the following, in order, hopefully to achieve being able to continue to draft;
1. double click the 2D Wireframe in the upper LH corner of the drawing plane.
2. envoke "Task Manager" but then cancel.
3. turn off the Autocad program and start over.
How to open multiple sheets using sheet set manager? In our office we have some machines that do and some that don't. Is there a variable to change? I know its possible I just don't know how to do it.
View 9 Replies View RelatedHow to automatically renumber the sheets if re-sorting occurs?
I’m not sure if there is a way to automatically renumber the sheets in sequential order in case of re-sorting the sheets. This might occur very often during the work!
For example, in the screenshot below, I wanted to re-numbering the sheets AUTOMATICALLY such that the numbers of the sheets starts from 1 to 6.
Then how to automatically re-number the sheets in sequential order automatically?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
shouldn't sheets marked as "exclude from count" not be counted?
I tried this in both 2013 and 2012 to see if maybe AutoDesk broke it, but it doesn't work in either one. This is easily reproducible for me, a file shouldn't be necessary. Just open up (or create) a multi sheet drawing. Go to edit sheet on one or two of them and check the "exclude form count" box. Now create a new iLogic rule and put the following line into it:
MsgBox("This is the number of sheets in the drawing: " & ThisDoc.Document.Sheets.Count, VBOkOnly, "Number of Sheets")
Is it possible to publish alot of files to DWF/PDF and have a field or attribute in the filename.
E.G. A revision within a titleblock in a drawing?
"Open in viewer when done" is checked. I've unchecked it and rechecked it but the Adobe Reader does not launch after plotting in background completes. It does launch when plotting directly to the DWG to PDF.pc3 plotter. What am I missing?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
How to use Autodesk's DWG to PDF driver to plot multiple through publish? Whenever I try to plot more than one layout at a time I get a driver not found error.
View 2 Replies View RelatedHas conquered the PUBLISH command hanging and failing to create a multi-sheet PDF?
Everything works the same as AutoCAD 2011, however, even though I have the "Prompt for Name" set I am not prompted for a file name and the publish progress symbol continues without a result.
I have no choice but to cancel the process.
we are working on circuit drawings which are lengthy and we usually split the model into more than 100 layouts and publish pdfs.So we get 100 pdf pages. When we view the pdf, we need to scroll down to get into next page.
Can we create a pdf for complete circuit in single page, where we can scroll the page horizontally. This will work in viewing the page horizontally with continuity in the circuit.
I want to export a dwg to pdf. It appears to do it, but doesn't. Keep getting
"ERROR: There were no plot table sheets in the current operation."
How to automatically print the layers of a drawing in separate sheets in one go?
I wanted to print the layers of a particular drawing each in separate sheet but wondering if there might be an automated way to do so. For example, if I a particular drawing comprise 15 layers then how to print each one of these layers in a separate sheet.
Sure, there might be more than one way to achieve this (like controlling the “plot” feature on the “layer properties manager” but what I’m looking for is an automated way to print all the 15 layers separately in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Don't know if I need to check some other setting or this is just the way it is. When I use PUBLISH to plot a set of drawings, I can't do anything else on the computer. If I try to type in any other software, it is interrupted and the cursor moved away from the software. I am able to type maybe a couple letters in any software, then the cursor goes away, put cursor back, type 2 letters, repeat, interrupt, cursor back, 2 letters etc..
Windows 7 PRO
Autocad LT 2012
While publishing several drawings I am having problems creating Single Sheets, (a customer preference). Even though I have the Multi-sheet/Single-sheet setting set to "Single" Autocad still creates a multi-sheet PDF. I am using Autocad 2012.
View 3 Replies View RelatedIf I open the drawing and then run the publish command the Status shows "No errors". If the file is not opened and I use the add sheets button to add the exact same file, it shows an error in the Status of "Layout not initialized".
View 3 Replies View RelatedI have been using autocad for 20 years plus. I've never really had to publish anything to DWF. We have a client that wants DWF's instead of PDF's. I have a 3D model with views in paperspace within viewports. I cannot for the life of me figure out how to plot these drawings to DWF in Black and White. I have tried everything. I am using monochrome.ctb plot style. The border and all border elements are plotting B/W but everything in the viewport is plotting whatever color it is in the VP. This is driving me nuts. Never liked this DWF format. If I plot to a PDF it all comes in B/W.
View 4 Replies View RelatedI installed AutoCad 2011 on a new computer Win7 Prof Off OS. I'm trying to make single pdfs for each dwg that I have. No matter what I select it keeps making one multi page file of all my dwg sheets.
I've tried going under Publish Options > General DWF/PDF and I've tried both Multi-sheet file and Single-sheet file getting the same results. I have the same problem whether I use Dwg to Pdf.pc3 or my Adobe.pc3 driver.