AutoCAD 2010 :: Creating Text Attribute Across Several Sheets?
Jan 10, 2013creating text attribute across several sheets?
View 4 Replies
ADVERTISEMENT
AutoCAD 2010 :: Creating PDF From Several Sheets
Dec 10, 2013Is there anyway to create 1 PDF from a multi-sheet AutoCAD drawing other than merging several PDF's together. I can create a PDF of a multi-sheet Inventor drawing in one step?
View 4 Replies View RelatedAutoCAD 2010 :: Creating Block With One Attribute (Elevation)
Feb 8, 2013I am trying to create a block with 1 attribute (ELEVATION) showing a finished floor level and another text (field) to show another level derived by the sum of the attribute value + and additional (fixed) number, say 100.
I have tried using fields inside an ATTRIBUTE or a simple DTEXT but the field does not update, it only picks up the DEFAULT of the attribute, not the user entered input. How can I do this?
attached is the block
AutoCAD 2010 :: Creating Column Bubble Block That Have Attribute And Both Be Annotative
Sep 22, 2011I'm having an issue with creating a column bubble block that would have an attribute and both be annotative.
I've created a 3/8" dia circle with 3/16" text and the text is NOT annotative. The bottom of the circle is at 0,0 with the text justification at MC
I create the block of the circle and text and make it annotative and save
When I insert it into another drawing, the block inserts properly and scales as desired. The issue is when inserted, I'm NOT given the option to fill in the column # attribute. I can double click and enter text, but this should happen during insertion.
When I create the block, if I do NOT select the attribute as part of the block, I am given the option for the attribute during insertion but it does not scale automatically.
What am I doing wrong? I'm attaching my block as an example.
AutoCAD 2010 :: Attribute Text Twice In A Block?
Apr 27, 2012I need to create blocks in which the same text appears twice. I've created an invisible attribute to hold the text and created two mtext object containing fields that point to the attribute value.
The text fields show the default value of my attribute but will not change when the attribute is set on an placed instance. After setting the attribute on an instance I've tried UPDATEFIELD and REGEN but still I see the default value.
AutoCAD 2010 :: Attribute Text In A Block
Jul 23, 2013whenever I make a block with attributed text the block works just fine when I insert it into a drawing like normal. However if I try and open the block drawing by itself the attributed text just turns into normal text after I get this message "Orphan Attdef Objects found & Converted to Text". This problem seems to happen on two of our machines but a third co-workers machine still works fine.
View 9 Replies View RelatedAutoCAD 2010 :: Copy Text From One Attribute To Another Within Same Block
Feb 3, 2012Is there an easy way to transfer the text inserted in one attribute and copy it over to another attribute in the same block? This is for a titleblock. We are currently using AutoCAD Electrical. We need to do this on over 10,000 drawings so we would like to be able to write a script or lisp routine so we could run a batch across all of the drawings.
View 6 Replies View RelatedAutoCAD 2010 :: Constraint Based On Attribute (text Box) Width?
Apr 17, 2012Is there a way to constrain a few objects to an attribute text box width? I want the background box and line to stretch, based on what is typed in that attribute box.
I know that if I make the attribute, a multi-line attribute, I can add a backgroud mask. I don't want to take this route, because the mask boundary varies, depending on what character is typed. Also, there is a gap between the mask and line I would like to maintain.
I tried some constraint stuff, but all I seem to be able to constrain is the insertion point of the text box, and not the width grip...
AutoCAD 2010 :: Change Attribute Text Size Global
Feb 19, 2012I used the BEDIT command (editor) on my block to modify the text size then save the block editor changes. Then use ATTSYNC to perform the changes on all existing blocks references to resize the texts, but after i complete the ATTSYNC command, the text in all the blocks disappear.
View 2 Replies View RelatedAutoCAD 2010 :: Explode Block Without Losing Attribute Text?
Jun 18, 2013I am using AutoCAD 2012 (Electrical). I have a few blocks that I pasted in a drawing with text that is contained in attributes.
I would like to explode these blocks so that I can make some changes to them, but when I do this, I lose the text that is contained in the attributes. After exploding the blocks, I just see the attribute names rather than the text that they originally contained.
I hate to have to re-type all this info. If I could somehow choose to choose to convert the text originally contained in attributes to plain old static text, that would be perfect for me.
AutoCAD 2010 :: Echoing Data From One Attribute To Other Attributes (or Text Objects)?
Nov 16, 2012I have a drawing template (block) where the drawing number is displayed in two locations (attributes). The same value has to be entered in both attributes.
Is there any way of "echoing" the data from one attribute to other attributes (or text objects)?
AutoCAD 2010 :: Can't Change Attribute Value In Enhanced Attribute Editor
Dec 21, 2012creating a block with attributes. I did manage to get my block set up and inserted in a dwg, but I am unable to change the "value" of any attribute. Unless I click on the "..." button next to the value field.
View 1 Replies View RelatedAutoCAD 2010 :: Change An Attribute From A Value From Another Attribute In The Same Block
Oct 5, 2012What I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies View RelatedAutoCAD VB :: 2011 Batch Convert Field Attribute To Text Attribute In Blocks Using VBA
Jun 3, 2011I've got hundreds of files to convert.
In VBA, how can I batch convert field attributes in blocks to text attributes while retaining the blocks? Is there a simple way to univerally convert them all at onceusing VBA? The plotted values for the fields must be retained, too.
Explode will not retain the value of the field.
Burst will not work as it explodes the blocks as well.
You can right-click on the field and slelct "Convert to text" from the RCM. So I know that the process exists within CAD, just need to batch the process for a quantity of DWGs at a time - in VBA.
AutoCAD .NET :: Attribute Reference Text String MText Attribute
Mar 16, 2012I am using M Text Attributes to store imperial lengths in the drawing, feet inches and fractions (stacked). When I read back the Text String property which, is the M text Attribute.Contents parsed, I am having problems because the parser does not add a space between the inch and the fraction. So, is there any setting that could be used to tell the parser to add the space between the inch and the fraction?
View 1 Replies View RelatedAutoCAD Civil 3D :: Creating An Index Of Sheets?
Mar 18, 2013I created plan and profile sheets using the P&P tools. Then I created a new drawing and attached (XREF) the dwg with the viewframes in it. Then I set the viewframe layer to Plot instead of non-plot and I changed the color so that it would be heavy (we use CTB).
Then when I went to my PSPACE layout to try and plot, the viewframes are NOT there. The layer IS turned on, because there's a PLINE that I drew on that layer and it DOES show up. When in modelspace, the viewframes are there and the color did change as expected.
So why do they disappear when I'm on the layout tab?
The goal is to create a plottable sheet that identifies where each sheet is (I want to point to each viewframe and lable them C-101, C-102 etc).
AutoCAD Civil 3D :: Creating P&P Sheets For Road
Dec 10, 2013I am creating P&P sheets for my road. I created view frames, and when I got to create sheets, I pick "all layouts in new drawing". I go to open the new drawing up, but all that shows up/tranfers is the profile and alignment, nothing else comes over ( proposed linework, existing linework, etc.)??????
View 4 Replies View RelatedAutoCAD Civil 3D :: Creating Cross Section Sheets
Dec 8, 2012After I create cross section sheets (Output---> generate cross section), the generated sections do not fit in the sheet exactly. In fact, the generated layouts do not cover the sections correctly, and some sections fall outside the created sheet.
It should be noted that I use the "ISO A1 Section 1 to 500" layout which is installed on the default pass of C3D (template folder), and the scale of "view section style" is set to 1/500. I tried the scale of the drawing (toolspace window---> setting tab---> rigth click on the name of drawing and click edit drawing setting) with 1/500, however the problem was not solved.
Another important issue is that the section views in the "Model space" are shown correctly, but my problem is in the layout space after generating cross sections.
AutoCAD Civil 3D :: Creating Layout Tabs For Plan And Profile Sheets
Dec 18, 2013I am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View RelatedAutoCAD Civil 3D :: Creating Sheets - Always Have Prompted To Create New Profile Views?
Sep 2, 2013Every time I create the sheets C3D ask me to create a profile view ?
But ... I already have it ....
Does C3D ask always for a new one ?
AutoCAD Civil 3D :: Creating Plan And Profile Sheets With Multiple Alignments In The View
May 3, 2013When creating plan and profile sheets with multiple alignments in the view, what is a common practice in civil 3d?
- Data shortcut all alignments that are in the view into the plan and profile model
- Create a dwg that has all the alignments data shortcutted and xref that into the plan and profile dwg
- Create a dwg for each alignment and xref into an overall alignment dwg via attach and then xref the overall into the pp sheets dwg model.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCAD Civil 3D :: Creating Cross Section Views (Sheets) / Set Margin Inside Viewport?
Mar 12, 2013When creating cross section views ("Home>Section Views>Create Multiple Views"), my sections are being placed at the exact boundary of the viewport (viewport is per my template).
Surely there's a way to create a margin inside the viewport.
Here's a screen shot of what I'm seeing. Notice how the dotted "Plot Area Boundary line is going right thru the left axis labels and on top of the bottom axis blue line (which means the bottom axis labels will NOT be seen).
AutoCAD Civil 3D :: Viewframe Groups And Creating Multiple Double Plan View Sheets?
Jan 10, 2013I new to using the view frame groups we do allot of double plan view 11x17 sheets using an alignment on top of MrSid aerial drawings. It is very time consuming to setup the viewports along the alignment doing the old fashion method of copying the page setup and sliding the model space along the alignment for the next sheet. I understand the plan profile and cross section methods of creating multiple sheets and how the viewframe group works for those type of sheets. I'm just not sure how to create a dwt template for one plan view on top of another plan on the same sheet with to viewports. I know I'm not the only person that creates road cl double planviews when your not concerned about a profile.
View 3 Replies View RelatedAutoCAD 2010 :: How To Get DWG File Of Metric Sheets
Jul 27, 2012I would like to get a dwg file of the metric sheets, A0, A1, A2, A3, A4. I have seen these in the past, as a template in autocad but can't find them in AutoCAD2012. I need them with titleblock intact as I need to copy their format, and I would find it easier to just rearrange an existing sheet. I need the A4 as soon as possible.
View 2 Replies View RelatedAutoCAD 2010 :: Import Layouts As Sheets
Jun 10, 2011When I try and import layouts as sheets, the "Prefix sheet titles with file name" is subdued. (AutoCAD MEP 2012)
View 3 Replies View RelatedAutoCAD 2010 :: Sending A DWG To PDF With Multiple Sheets?
Jan 24, 2013I have to two sheets layed out in one drawing in Auto CAD 2012, a tilte sheet and the building plan. How can I send that to one PDF file (one PDF file with both sheets) using the 'DWG to PDF.pc3' option?
View 5 Replies View RelatedAutoCAD 2010 :: Publish Dropping Sheets
Feb 1, 2012I am using acad 2011, and have noticed that when using the publish command, for more than about 15 sheets, it always drops one sheet, and duplicates one, so I always come out with the correct number of pages, but 1 is gone and one has 2 copies.
View 3 Replies View RelatedAutoCAD 2010 :: General Note On Multiple Plan Sheets?
Feb 20, 2013I am using Rel. 2012. I would like to hear what some of the practices are regarding a general note used on multiple plan sheets. What I have is a plan set with 150 sheets. On each sheet a general note is required that likely will be revised by agencies reviewing the plans. Currently I have a base cadd file with the note and I x-ref that drawing into each sheet.
View 4 Replies View RelatedAutoCAD 2010 :: Missing Command Line And Tab Sheets For Paperspace
Aug 28, 2012 When drafting either in model space or paperspace, eventually either the command line disappears completely "OR" the command line area increases and prevents me from seeing the tab sheets for accessing paperspace "OR" the mouse arrow gets stuck outside of the drawing area. This is the most non-productive program here after all these years (the worst version ever)
I either have to do one of the following, in order, hopefully to achieve being able to continue to draft;
1. double click the 2D Wireframe in the upper LH corner of the drawing plane.
2. envoke "Task Manager" but then cancel.
3. turn off the Autocad program and start over.
AutoCAD 2010 :: Open Multiple Sheets Using Sheet Set Manager?
Jan 25, 2012How to open multiple sheets using sheet set manager? In our office we have some machines that do and some that don't. Is there a variable to change? I know its possible I just don't know how to do it.
View 9 Replies View RelatedAutoCAD 2010 :: How To Automatically Renumber Sheets If Resorting Occurs
Mar 28, 2012How to automatically renumber the sheets if re-sorting occurs?
I’m not sure if there is a way to automatically renumber the sheets in sequential order in case of re-sorting the sheets. This might occur very often during the work!
For example, in the screenshot below, I wanted to re-numbering the sheets AUTOMATICALLY such that the numbers of the sheets starts from 1 to 6.
Then how to automatically re-number the sheets in sequential order automatically?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.