AutoCAD LT :: Loading Dvb Files In 2010?
May 31, 2012
started a new job after being out of the biz for a couple of years and would like to load some sweet dvb files that I grew accustomed to in my prior life. I can appload my .lsp files with the the best of them but these dang dvb's have me wishin' they were .lsp! The dvb's were at one time lisp routines but were turned into dvbs by a power user somewhere along the line. What's my avenue for success at ever getting to use these sweeties again?
View 9 Replies
ADVERTISEMENT
Apr 5, 2013
I have added a few custom autocad commands that are specific to my scenario. I created Ribbon (and Menu for classic mode) for these commands and they are working fine. The only issue is that these Buttons (Ribbon and Menu for classic mode) are not loading the images(icons). All I get is a cloud image for both commands.
I have used 16X16 for small image and 32X32 for large image. Both are bmp files. These are attached to the custom Autocad command that I am using. The commands themselves are working fine, except for the image which is not displayed. In short, what can be the possible reason for images not showing up?
View 4 Replies
View Related
Feb 13, 2012
I have an intermittent issue with AUTOCAD 2012 on new 64bit W7 PCs.
The issue is that sometimes when first opening AutoCAD it stops at the splash screen and says loading template at 0%.
We have to stop ACAD.exe and restart the PC, sometime it'll be fine after a single re-boot, this morning it took 3.
This is happening (intermittently) on 3 of 7 new Dell PC's.
If it was an issue with the ACAD.dwt, which we're loading from a central location and have been using for years, I would have thought it would be a consistent problem, not an occasional one.
View 6 Replies
View Related
Oct 2, 2012
"Open in viewer when done" is checked. I've unchecked it and rechecked it but the Adobe Reader does not launch after plotting in background completes. It does launch when plotting directly to the DWG to PDF.pc3 plotter. What am I missing?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Jun 11, 2013
If I have an image within in an XREF (lets say logo in a titleblock), when I open my drawing I get a image frame with the file path listed in its place. If I print, it only prints the frame and file path.
The way that this is fixed (temporarily) is If I reload the xref and image for each xref containing an image. Upon reopening the drawing, the same problem persists. I need to reload the xref/image every time I open the file if I want the logo to print on my drawing.
View 1 Replies
View Related
Dec 28, 2011
Im trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies
View Related
Apr 6, 2012
I created a new work space and under my new workspace shows only the Express Tools. How do I load all the others? If I go into any of the default workspaces all the tabs shows.
View 1 Replies
View Related
Aug 12, 2010
A consultant sent us their titleblock along with the true type font. I copied the font and pasted it into my AutoCad 2010 fonts folder. I noticed that the title block text style is "standard." When I try to set the font in standard to the true type font, the font does not appear in the list.
View 4 Replies
View Related
Jun 24, 2012
why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies
View Related
May 9, 2012
i have upgrade to 2012 version and try to upload personal.cui menu, but it not shown on the pull down menu.
View 1 Replies
View Related
Feb 19, 2013
Xref overlays are not loading properly. Coordinates are off after loading ... even with insertion at 0,0,0.
View 7 Replies
View Related
Aug 27, 2012
When I try open AutoCad, at first it loads fine, doing all the pulg ins and that, then just stops.
The text in the corner just says "Loading", and I've left it for hours an it really isn't.
View 4 Replies
View Related
Jul 18, 2012
I'm the IT nerd and haven't used autocad before, but i'm trying to troubleshoot an issue with one of our users who is having this issue. From what I have seen, when he loads a drawing, I can see a whole heap of unidentified object messages down the bottom. The drawing loads, but it's missing all the text (mostly the dimensions).
He's told me that he can load it 4 or 5 times, and it will show up, but it fails more than it works.
View 8 Replies
View Related
Jul 29, 2011
I have added my custom hatch patterns to the .pat file and they aren't showing up. Is there a certain step I am missing in order for this to work? Is there an easier way to load my custom hatches in CAD 2010 that I am not aware of?
View 2 Replies
View Related
Feb 9, 2012
When running VS 2010 express in debug mode, for either AutoCAD 2010 or 2012, 64 bit, AutoCAD gets slower and slower loading with each subsequent debug session until it becomes intolerable. A system restart is necessary. Is this normal? I see this on a fast machine with tons of ram. During the waits there are patches of white screen in the various AutoCAD interface components. The performance hit is exponential with each session. The first debug is normal, The second is slightly slower. The third is noticeably slower and so on.
View 3 Replies
View Related
Oct 4, 2010
I am having a problem with AutoCAD crashing without fully loading. I will get the splash screen and the application background will momentarily appear with "AutoCAD 2011" in the title bar then it will all disappear with no visible error message. By checking ACD2011ENUAdlm.log in C:Documents and SettingsAll UsersApplication DataAutodeskAdlm I get the following error message:
3536 2010/10/04 10:05:39 Reason=Fatal error
View 9 Replies
View Related
May 18, 2012
I have a drawing that I've been working off and on now for a couple of months and is particularly large (48MB). I have finally put togther a concept in it which took me two days and when I tried to RENDER, AutoCad crashed. All is still when until I tried to reopen the drawing, AutoCad loaded the drawing until 99% and froze. I tried the .bak and that crashed AutoCad. I also tried the .bak from an hour earlier and that didn't work. Here are the steps I've taken so far:
-Opened drawing and .bak(s) in TrueView, converted to Standard, Opened the drawing in TrueView (no problems) and tried to open in AutoCad....same old issues.
-Tried inserting drawing as a block in a new drawing (crashed AutoCad)
What I can do? Everything opens fine in Trueview?? I can resort to older files but that would be difficult. Below are my computer specs.
Intel i7 980X Extreme
GeForce 460GTX SLI x 2
PC3-10700 12GB
Windows 7 64bit Pro
AutoCad 2011
View 3 Replies
View Related
Mar 24, 2012
If it is possible to load old r14 FAS files into more recent ACAD versions, will it work on r2012 f.e.
View 2 Replies
View Related
Apr 23, 2013
I am running LT 2012 and it keeps freezing at the Loading customiztion files point... This locks the whole pc and I need to do a hard reset.
View 7 Replies
View Related
Jan 2, 2005
i just upgraded from 7 to CS...looks good and would like to keep using it. Only problem is whenever i try to open my .psd files created in 7, i'm giving the message:
"Could not complete your request because the layer is not a valid text layer"
Is there anyway to overcome this, as i need to access all of last years work.
I only changed to CS as when 7 finished loading the fonts in the startup screen, it would jump back to windows and close PS?
View 6 Replies
View Related
Jun 3, 2012
just upgraded from CS5 to CS6 (originally had CS3) now when trying to load images which were loaded in 2002 when using CS3 I get an error message 'windows cannot find C:Program files(x86)Adobe PhotoshopCS3Photoshop.exe Make sure you typed the name correctly then try again' I assume that there is an association with a file that no longer exists how can I change this?
View 7 Replies
View Related
Nov 12, 2013
Just got PSE 12, I have added mutliple brushes without difficulty. But I can not get the ASL files I want to add to show up. I have loaded them into the correct folder in presets but they are not showing when I open 12.
View 1 Replies
View Related
Mar 13, 2014
I'm seeing my InDesign applications is getting crashed while loading the XML files, please find below the crash report.
Problem signature:
Problem Event Name: APPCRASH
Application Name: InDesign.exe
Application Version: 8.0.2.413
Application Timestamp: 51fb7197
[code]....
View 5 Replies
View Related
Jun 12, 2013
When I load a gile it crashes. I've only tried loading JPG's. I have also uninstalled and re-installed it.
View 1 Replies
View Related
Apr 6, 2008
I have:
AMD Athlon 64x2 Dual Core Processor 6000+ 3.0 GHz.
3 Gig's Ram.
32 bit Windows Vista Home Premium.
Photoshop CS3 Extended.
It takes 20 Seconds+ to open a jpg or to create a new file even 50x50 pixels. Loading the actual program is very quick though.
I have a network printer, but I set Microsoft XPS Document Writer as my default.(Its a local printer)
I Run PS CS3 as admin and with compatability for xp sp2.
View 8 Replies
View Related
Jan 26, 2009
Photoshop C3 has been loading even the smallest of photo files very slowly -- about 10-15 seconds for one.
it might be a networked printer, but the printer on this computer is NOT networked.
I'm running Windows XP, latest update, with 3 gig of RAM. And we have deleted and reloaded the Photoshop program and updated it to make sure it's not a file goober in the program.
View 4 Replies
View Related
Dec 22, 2011
When I load a set of files into RAM Player they do not always fully load. In two separate instances 1381 frames have loaded (in todays example there are 1921 frames rendered in the set).
I guessed that stopping at 1381 frames on two occasions was a bit curious and maybe thought the memory limit was not set high enough. I increased this but no change.
View 4 Replies
View Related
Feb 29, 2012
the Photoshop CS5.1 that I have installed on my Windows 7 64b has stopped working. It still works on my other computer though. It starts up just fine, but when I go to Open a PSD file (which I have edited here before) nothing happens -- absolutely nothing! When I try to create a new file the same nothing happens. I sure hope I don't have to reinstall or something. I don't think I've made any updates to Photoshop, it just stopped working this week for no apparent reason that I can think of. I also went back and tried my CS5 version and the same thing happens.
View 8 Replies
View Related
Oct 24, 2012
Is it possible to disable the dialog for choosing how transparency is treated ? If you to batch operations on EXR files you have to confirm for every file!
View 3 Replies
View Related
Jul 11, 2006
i have been able to recover most lost data and images, jpegs etc using a recovery program...
BUT for some reason not all my photoshop images/files will load, others try to load but i get this error message come up "could not complete your request because the file is not compatible with this version of photoshop"
View 1 Replies
View Related
Feb 4, 2013
I have recently bought a Canon 650D and I am now unable to load CR2 Raw files in to Elements 10 for editing-it is coming up with a message "Cannot open ....... CR2 because it is the wrong type of file. I have not had this problem before.
View 12 Replies
View Related
