AutoCAD 2010 :: Text Not Showing When Loading Drawing
Jul 18, 2012
I'm the IT nerd and haven't used autocad before, but i'm trying to troubleshoot an issue with one of our users who is having this issue. From what I have seen, when he loads a drawing, I can see a whole heap of unidentified object messages down the bottom. The drawing loads, but it's missing all the text (mostly the dimensions).
He's told me that he can load it 4 or 5 times, and it will show up, but it fails more than it works.
View 8 Replies
ADVERTISEMENT
May 18, 2012
I have a drawing that I've been working off and on now for a couple of months and is particularly large (48MB). I have finally put togther a concept in it which took me two days and when I tried to RENDER, AutoCad crashed. All is still when until I tried to reopen the drawing, AutoCad loaded the drawing until 99% and froze. I tried the .bak and that crashed AutoCad. I also tried the .bak from an hour earlier and that didn't work. Here are the steps I've taken so far:
-Opened drawing and .bak(s) in TrueView, converted to Standard, Opened the drawing in TrueView (no problems) and tried to open in AutoCad....same old issues.
-Tried inserting drawing as a block in a new drawing (crashed AutoCad)
What I can do? Everything opens fine in Trueview?? I can resort to older files but that would be difficult. Below are my computer specs.
Intel i7 980X Extreme
GeForce 460GTX SLI x 2
PC3-10700 12GB
Windows 7 64bit Pro
AutoCad 2011
View 3 Replies
View Related
May 9, 2012
I'm looking for a field or maybe piece of rtext that can display any pdf's that are showing in a drawing, I've had no luck in finding anything that can do it.
View 4 Replies
View Related
Apr 18, 2012
I have a problem in polyline width. when i set polyline width in one drawing shows solid line & in another drawing shows blank lines.
View 9 Replies
View Related
Sep 29, 2011
Running into some strange text issues... fonts having problems and text not showing on the drawing that is in the text box. (shows fine with out the bold option but does not when its turned on)
files attached should explain.
inv 2012
sp up to date
View 3 Replies
View Related
Apr 17, 2012
why a drawing would open without a number of objects (text) showing? I open it up and all notes are gone, yet another user opens it up in "eDrawings" and it opens fine. Oddly, when in ACAD I click OPEN, the preview ACAD gives me when I click this file once shows the missing text etc. But when I open it they're missing.
Below is a screenshot of firstly the drawing open in ACAD and secondly open in eDrawings.
View 9 Replies
View Related
Apr 22, 2013
We have dwg auctocad 2010, and there are some Arabic Text in the cad dwg,
When I convert cad dwg into PDF file, It arabic Text not showing correct Arabic language.
Arabic Text show separate separate alphabat why ?
How I could convert cad dwg so that aracbic text should be show correctly in PDF file ?
View 3 Replies
View Related
Aug 2, 2012
I have a drawing with numerous text fields that I'd like to replace. For example, there are 30 different text fields showing a dimension of 19.298". I need to replace all of them so that they show 19.125" instead. Is there a quick way to swap out the text without having to do it one field at a time? Is there something that would allow me to do it globally rather than individually?
View 5 Replies
View Related
Feb 19, 2012
I saw this feature in a drawing but can not figure out how:
Within a text box is linked to the file name, if I close and rename, when I open the file name is his name changed into the drawing with DWG extension including. How do I do this?
View 3 Replies
View Related
Apr 18, 2012
Is there a way to reset the stacked text globally on a drawing? Or is the only way to select text individually and update it a hundred times or so?
View 1 Replies
View Related
Jun 7, 2012
When I went to convert my finished CAD drawing into a PDF the text came out blurry, information was missing, and the lines were also blurry and still colored, even though the plot style was set to greyscale. I tried opening the file up on another computer and it still did the same thing. I ended up copying the drawing into a whole new document and messing around with it to get it to finally print to PDF properly, however, I would like to know why this happened and how it can be fixed if it happens again. I have attached an image of the PDF that printed out poorly, and the final proper PDF so you can see what it was supposed to come out as.
View 6 Replies
View Related
Apr 26, 2012
When I purge a drawing, the text styles are not a selectable option (as if there are no purgeable text styles). if i use (-purge), it will purge the unused text styles. I can also go into the Styles dialog box and delete the styles. It happens in all drawings and nobody else in the dept has the problem. I can't find any settings that would exclude any items from the purge dialog box as well. Autocad 2012? windows 7 64 bit.
View 1 Replies
View Related
Jul 26, 2013
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies
View Related
Mar 15, 2013
Which settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 Replies
View Related
Mar 12, 2012
I created some custom linetypes. When I copied them over to my drawing, the text in the linetypes came in extemely large. I really need to get this figured out as I am setting up a template for a new customer, and they want all these included.
I have attached the dwg for reference.
View 5 Replies
View Related
Dec 13, 2012
I've previously posted about poor performance across our WAN, and working with Toolspace open. I have suspected that maybe the drawing wasn't loading completely, so whenever I did certain operations, C3D needed to go back across the WAN to the server for more of the drawing, or maybe just to read some portion of the drawing file, where the request was getting delayed by latency in the server.
Anyway, today, I copied a drawing file to my harddrive and opened it. As expected, the drawing loaded fairly quickly, except for having to go out to the server to syc the references and xref'd drawings. But once loaded, everything worked the way it is supposed to. I can turn on the contours, and it just happens. I can open the drawing settings, and then close them, and I instantly have control back, all with Toolspace open.
Now, C3D may still be needing to go back to the drawing for whatever it is that it needs, but being on my harddrive, it can get what it needs very quickly.
My question is: Why doesn't C3D completely load a drawing into memory? We now have 64 bit systems with access to gobs of memory.
View 9 Replies
View Related
May 31, 2012
started a new job after being out of the biz for a couple of years and would like to load some sweet dvb files that I grew accustomed to in my prior life. I can appload my .lsp files with the the best of them but these dang dvb's have me wishin' they were .lsp! The dvb's were at one time lisp routines but were turned into dvbs by a power user somewhere along the line. What's my avenue for success at ever getting to use these sweeties again?
View 9 Replies
View Related
Feb 13, 2012
I have an intermittent issue with AUTOCAD 2012 on new 64bit W7 PCs.
The issue is that sometimes when first opening AutoCAD it stops at the splash screen and says loading template at 0%.
We have to stop ACAD.exe and restart the PC, sometime it'll be fine after a single re-boot, this morning it took 3.
This is happening (intermittently) on 3 of 7 new Dell PC's.
If it was an issue with the ACAD.dwt, which we're loading from a central location and have been using for years, I would have thought it would be a consistent problem, not an occasional one.
View 6 Replies
View Related
Oct 2, 2012
"Open in viewer when done" is checked. I've unchecked it and rechecked it but the Adobe Reader does not launch after plotting in background completes. It does launch when plotting directly to the DWG to PDF.pc3 plotter. What am I missing?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Jun 11, 2013
If I have an image within in an XREF (lets say logo in a titleblock), when I open my drawing I get a image frame with the file path listed in its place. If I print, it only prints the frame and file path.
The way that this is fixed (temporarily) is If I reload the xref and image for each xref containing an image. Upon reopening the drawing, the same problem persists. I need to reload the xref/image every time I open the file if I want the logo to print on my drawing.
View 1 Replies
View Related
Dec 28, 2011
Im trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies
View Related
Apr 6, 2012
I created a new work space and under my new workspace shows only the Express Tools. How do I load all the others? If I go into any of the default workspaces all the tabs shows.
View 1 Replies
View Related
Aug 12, 2010
A consultant sent us their titleblock along with the true type font. I copied the font and pasted it into my AutoCad 2010 fonts folder. I noticed that the title block text style is "standard." When I try to set the font in standard to the true type font, the font does not appear in the list.
View 4 Replies
View Related
Apr 27, 2012
i usually get stock at this screen , usually what happen is i click "Continue" and it load the video screen and i start working but now nothing ... just nothing when i had this before i try to restart sometimes work sometimes it's just load me the Autocad 2012 "Non-Civil3D" .
View 7 Replies
View Related
Jun 24, 2012
why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies
View Related
May 9, 2012
i have upgrade to 2012 version and try to upload personal.cui menu, but it not shown on the pull down menu.
View 1 Replies
View Related
Feb 19, 2013
Xref overlays are not loading properly. Coordinates are off after loading ... even with insertion at 0,0,0.
View 7 Replies
View Related
Aug 27, 2012
When I try open AutoCad, at first it loads fine, doing all the pulg ins and that, then just stops.
The text in the corner just says "Loading", and I've left it for hours an it really isn't.
View 4 Replies
View Related
Jul 29, 2011
I have added my custom hatch patterns to the .pat file and they aren't showing up. Is there a certain step I am missing in order for this to work? Is there an easier way to load my custom hatches in CAD 2010 that I am not aware of?
View 2 Replies
View Related
Feb 9, 2012
When running VS 2010 express in debug mode, for either AutoCAD 2010 or 2012, 64 bit, AutoCAD gets slower and slower loading with each subsequent debug session until it becomes intolerable. A system restart is necessary. Is this normal? I see this on a fast machine with tons of ram. During the waits there are patches of white screen in the various AutoCAD interface components. The performance hit is exponential with each session. The first debug is normal, The second is slightly slower. The third is noticeably slower and so on.
View 3 Replies
View Related
Apr 5, 2013
I have added a few custom autocad commands that are specific to my scenario. I created Ribbon (and Menu for classic mode) for these commands and they are working fine. The only issue is that these Buttons (Ribbon and Menu for classic mode) are not loading the images(icons). All I get is a cloud image for both commands.
I have used 16X16 for small image and 32X32 for large image. Both are bmp files. These are attached to the custom Autocad command that I am using. The commands themselves are working fine, except for the image which is not displayed. In short, what can be the possible reason for images not showing up?
View 4 Replies
View Related
