Which settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 RepliesI have set my text style and the height but what i am suppose to write in the Widht Factor case ?? The default setting is 1.0000?
View 2 Replies View RelatedFor some reason when I edit text and dimensions in model space the text will go huge and my text is non-annotative. If i change it in properties box it does not multiple it or if I am editing text though a viewport it will not multiply. Example - if I have style set to 4 (height) and I create mtext.
Then I decide that I want text to be 5 so I double click on mtext and highlight the text and change to 5 and the text will instantly be 200 not 5, but if I change in properties box it will stay at 5 or if I am in a viewport and change the text by double clicking and highlighting and then changing it to 5 it stays at 5. My issue is for whatever reason only in model space is the text being multiplied by a factor and I cannot figure out why this is happening.
I need to change the text line width in model space, not the overall text width or the text line width/weight in paper space. Our mold maker wants to measure that on screen and he wants to set the text line width to 0.060”, while the overall text width fixed.
For example, the text “REMOVE FROM BOAT” is 3” wide total from first letter R to last letter T and height 0.4”. That is easy to do. The hard part is that he wants the line in each letter to be 0.060” (1.5mm) wide. I practiced the true type text which is measurable in model space, but that is fixed with for a certain font with a certain size. I can change from one font to the other and get different thickness but cannot change the width freely to 1.5mm as requested.
I am trying to get DText objects to update width factor when I change the Width Factor of the Text Style. We have one style (Simplex) & I hoped to be able to set the width factor of that style to 0.8 or 1.2 depending on what is required and then just insert objects from the tool palette so they have the correct width factor.
This seems to work for MText but not for DText or Attributes. Short of using lisp is there a to update the width factor of DText & Attributes? (hoping to be able to do this on LT also)
Only way I can see for DText is to qselect text and change style to something else and back to Simplex. Only way for attributes I've found is to advance edit block and change text style to something else and back.
AutoCad 2013 & LT 2013
I use LT 2010 and have defined a multileader style which is annontative. When i use this each time i have to make he text annotative and set the height even though it uses the right annotative text style.
View 2 Replies View RelatedWhen i used to draw a rectangle, circle, line, etc- a box (or several) boxes popped up after i clicked the first point. These let me enter the distance then hit the tab button and go to a second box to enter height or angle depending on what i was drawing. There was also some popups that showed up when clicking the chamfer or fillet buttons but now those are all gone. When i input numbers, it goes to the command bar.
How can i get those small popup windows to reappear in my modelspace?
I have a itemized list in a mtext group and I want to change the text style in the main headings. When I select the heading line it says all style will be changed.
View 6 Replies View RelatedIs there any way to lock a text style so that the associated font style can not be changed?
View 2 Replies View Relatedi want to get all text font , text height and text widths on the drawing
Dim ListFont As New List(Of String)
For Each TextStyle As AcadTextStyle In ThisDrawing.TextStyles
ListFont.Add(TextStyle.fontFile)
Next
i used those code can get all text font on the drawing...but i only want to get text font which were used.and i dont know how to get the text height and widths on the drawing.
How do i increase the dimension text height in my drawing.When i go thro the styles and standards editor and increase the text height all the text in my sheet border also increases.Surely there must be a way to isolate the dimension text from the sheet text.
View 2 Replies View RelatedMy text style height is set to 1/8, however my leader text height is 3/16. How do I change the leader text height? T
View 6 Replies View RelatedI am having trouble getting my text height to change user the 'textsize' system variable.
When I input a new height at the command prompt using 'textsize' the text height in the text style dialogue box does not automatically change to match. Also when I use the dtext or mtext command after changing the textsize value, these commands use the value in the text style dialogue box instead.
When creating Mtext, I can't figure out how to specify a given height using the ribbon. Clicking on the "A" on the "Home" tab brings up the "Text Editor" ribbon and displays the Mtext editor in the drawing area. On the "Style" panel of the Text Editor ribbon is a drop-down box with a default height of 1/8". Clicking on this drop-down box gives the list, 1/8", 1/4", 1'-6", 1/8", and 3/16". It appears those are my only choices, but I need to make Mtext that is 1'-0" high. If I try to highlight the size selected in the drop-down box and type in 1'-0", AutoCAD erases my typing, replacing it with the 1'-6" choice (or some other member of the preset list). It does this whether or not I have typed text in the Mtext editor, highlighted that text, etc.
If I hover the mouse over the drop-down box, a tooltip comes up that says "Ribbon Combo Box - Text Height / Press F1 for more help." Pressing F1 brings up the Autodesk Exchange window which is blank except for a spinning wheel animation in the center that never stops. The promised "help" never appears.
Right now my only workaround is to create Mtext using one of the heights that AutoCAD has chosen to make available, then select it and change its height using the Properties palette, which may or may not be so easy depending on whether the height I need is very different from the height I was forced to use and the zoom factor of my view (the created mtext might show up as an almost invisible dot, forcing me to play "Where's Waldo" to select it). This is an almost unusable kluge. How can I set the size when creating the Mtext, not afterwards? How is the list of sizes available in the drop-down box determined?
I want to set the Textheight system variable using Autolisp. However 'textsize won't work.
I am setting up a routine so that when I want to draw a 1:100 scale drawing my dimscale is set to 100 and my textheight is set to 350. Likewise when I want a 1:50 drawing my dimscale is 50 and text height is 175. This way I don't have to keep changing the height setting when I'm using dtext and mtext.
Is it possible to change the text height of a drawing view label through VBA?
I have tried to change it by creating a new text style manually with the text height I require and then through VBA set the view label to use that style.
The View label takes on the new style but does not change the text height.
I have tried to use 'StyleOverride FontSize=' but I have text that is multi lined and using this command converts all my text onto one line.
Is it possible to change the text height of a drawing view label through VBA?
Below is my code so far,
Sub HoleDetailSheetLabels()
' Declare the Application object
Dim oApp As Inventor.Application
' Obtain the Inventor Application object.
' This assumes Inventor is already running.
'Set oApp = GetObject(, "Inventor.Application")
[code]...
I need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View RelatedI am having trouble with width factor in Model Space. I change the width factor and it seems to change but when I print it has changed slightly but not to what it has is model space. I dont really want to have to check the print preview to see if it is correct. Is there a way of displaying the correct width factor in model space?
View 3 Replies View RelatedI have a drawing with the model space set at 3/16" scale. I've never worked like this before (I obviously always scale in layout space). However, I need to get this drawing back to normal scale so I can work on it.
How to use the scale factor on this to get model space from 3/16" to 1:1.
how to give line height to text in AI Script
View 3 Replies View RelatedI've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor. I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.
I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.
How to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies View RelatedI created a new dimension style in a drawing. But i can't find this new create dimension style in othes drawing. I am wondering how can i create my own dimension style and could be use in every drawing as my own style?
View 1 Replies View RelatedCan this be done? I want to go through the DrawingView Object to get at a subcomponent of an assembly and either set that component to have hidden lines (where needed) or no hidden lines.
View 8 Replies View RelatedIs there anyway to save a multileaderstyle so that I don´t have to create it every time I open a new drawing?
View 3 Replies View RelatedI wonder if it is possible to create a new text style where one can set the text to be already rotated.
I know that it is possible to rotate text in many ways but the styles always seem to be set on the horizontal to begin with.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
I use IN MODEL SPACE command:
view/ viewports/ two viewports (horizontal or vertical)
just ordinary split window in model space.
I found out that is missing line between viewports. I am looking in options but there is nothing.
Which command or system variable it is???
My "center" line shows up fine in model space, but just solid lines in paper space.
View 7 Replies View RelatedHow do I edit line types? whenever I copy this particular existing line type into the other drawing the text style changes. There is no way of editing it when I go to the line's properties. I want to change the line type's Text style.
View 2 Replies View Relatedchanging text style in a drawing. Let's say there is a drawing where the font style is standard, or the standard is overwritten in the text box (different size or font). I want to create a new text style which uses a new text size and font.
If i select the text which was created earlier and switch text style to the one i just created only the size of the text changes not, and the font remains the same.
But if i enter the text formatting box select the text and in style i select the one i created (even though is already selected) the font will change as well. The problem with this solution is the time needed to change every text in a large drawing.
If i use MATCHPROP the same thing, the size of the text will change but not the font.
Is there a way to change both the size and font of the text fast and easy?
What the setting is to create a space between the leader line and the text.
View 2 Replies View Related