I have a itemized list in a mtext group and I want to change the text style in the main headings. When I select the heading line it says all style will be changed.
View 6 RepliesUnits percision is at 1/64".
I have a custom text style set to a height of 3/32"
I have a custom mleader style set to mtext with text set to that style.
The text height setting in the mleader style dialog is 3/32" and grayed out.
Why create an option and then block us from using it?
All new mleaders are being created with a text height of 1/8". Why?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I am working on a simple function to add/remove a non-printing stamp our drawings to specify a preliminary drawing. The issue is that I cannot seem to get AutoCAD to accept the text height in the Mtext command. Below is the code; try it and see.
(DEFUN NOT4CONSTRUCTION(/ CTR HGT PT1 PT2) (IF (EQ (GETVAR "CLAYER") "NOT4CONSTRUCTION") (SETVAR "CLAYER" "0")) (IF (EQ (GETVAR "CTAB") "MODEL") (SETQ HGT "8'-4"") (SETQ HGT "1"")) (IF (= (ASSOC 0 (TBLSEARCH "layer" "NOT4CONSTRUCTION")) nil) (PROGN (VL-CMDF "-LAYER" "M" "NOT4CONSTRUCTION" "C" "30" "" "TR" 90 "" "P" "N" "" "") (SETQ PT1(LIST (- (CAR (GETVAR "viewctr")) (/ (* (GETVAR "viewsize") (/ (CAR (GETVAR.
[code]....
I use LT 2010 and have defined a multileader style which is annontative. When i use this each time i have to make he text annotative and set the height even though it uses the right annotative text style.
View 2 Replies View RelatedI have a routine that looks for an MText date stamp and replace the old date with a new date. The problem is some MText strings appear encrypted. Below is an example:
{\H1.121x;\C1; \LFY 2011-12\l \H0.6252x;04-30-11} This is what I should get when I extract the string (as shown in Property window)
(1 . "\pxi-2.1818,l4.3636,ql,t4.3636;{\fSymbol|b1|i0|c2") is what I get when I extract the group code.
I'm running AutoCAD 2012 on Windows 7.
Which settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 Replies View RelatedI'm running the following string in a routing that is looping so I get dozens of these prompts. How to supress these? Or, do i have to use to entmake?
(begin loop...
(command ".-Mtext" CSW-Tpoint "W" 0.0 (vl-filename-base (vla-get-imagefile image)) "")
);end loop
Prints to the command line..
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Is there a way to search for a text style in a civil style? I have a text style that our company is trying to get rid of and I would very much like to not have to go through our 72 company styles.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
how to change the MText Height property in vb.net, i used the below code, Dim mytext As New MText mytext.Contents = txt mytext.height = 130 mytext.Location = Pt mytext.Attachment = AttachmentPoint.MiddleCenter But it is showing an error that Height is an invalid method.
View 2 Replies View RelatedI am using autocad 2011, in that i have some MTEXT's , i am trying to make them at same height & same font, i am selecting the all fonts & then properties & then making all height "3" & font style "arial" but if i double clicked on text it's showing me "1.37" height & "calibri" font
View 2 Replies View RelatedI am doing my general notes
I would like the top text to be larger and a different text style than the next text can this be done
for example a title of times new roman .08
and the rest of the notes to be simplex .06
( know its not simplex but that wasnt an option)
I have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedI am trying to do centerline stationing but the texts are coming out too small and the tick marks are not showing up.
View 2 Replies View RelatedWe'll I'm not sure what happen here but, I can not for the life of me figure out why the double-click stopped working
PICKFIRST = 1
DOUBLECLICKEDIT=ON
and the Noun/Verb is checked . When I look at the CIVIL CUI, I do not have any double - clicks but the ACAD CUI does - this is load too right.
Where is the “annotative scale” and “paper text height” properties?
I couldn’t find the “annotative scale” and “paper text height” properties when dealing with “Civil 3D” objects such as points and contours the same way we have it in the regular AutoCAD.
For example, suppose that I need to increase to decrease the “text height” of the point label considering a particular “annotative scale” property, then how this kind of thing might be done in the AutoCAD Civil 3D?
I have slope % angles labeled on a plan, but they are too large. They are 1/8" tall, and I need them to be 3/32" tall. I have checked the style (ROMANS) to be sure the text height is set to 0", and it is. I've also ensured that these labels are on this label style.
Check the screenshot. I added 2 screenshots with a huge difference in font size just to be sure my point gets across. And, I have hit APPLY and closed the window just to be sure. You will see up top, I have it set to 3/32". Actually the text isn't showing right, it is still stuck on 1/8". But, regardless, you can see in the lower screenshot where I have changed it to 3", but the text has not changed.
As a side note, the text on the slope labels should match the height of the contour labels you can see in the screenshots.
I have numerous MText paragraphs that I need to combine into a single piece of MText. I want the paragraphs preserved in the final piece. I've found some routines that can combine pieces of MText but I don't know if they preserve the paragraphs.I have DotSoft Toolpac but it doesn't seem up to the task. C
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
For labels, is the font decided in the general tab under text style or in the text component editor under the format tab? Are there overrides? There seems to be multiple locations for fonts choices when creating a label and I can't find a nice black and white answer.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I like using the edit label text in the lable styles to add additional text and information.
I can turn on / off the backroung mask for all the style but not each.
Is there a way to turn on / off the backround mask of each layout text.
I'm using civil 3d 2012 and testing 2013.
Have some incoming architectural drawings with loads of different tt font types within mtext. I have globally altered the secondary font styles in format however this does not update the font type within the mtext. Have symplex with areal set and visa versa. Looks like the lot has been set manually different for each individual item of mtext. Nightmare. All mtext is inconsistant and loads of different types on the same drawing. Some idiot must have had a lot of beer.
Ideally I would like to set every piece of text and mtext to simlex. Must be an easy way.
How to change the MText style to Romans in vb.net. At present the text style is Standard.
View 9 Replies View RelatedHow do you change Mtext to A specific style so it always opens up that way.
View 2 Replies View RelatedThis has happened in a couple of drawings now. The STYLE dialog keeps saying "The current style has been modified. Do you want to save your changes?" even when I have changed nothing at all. Anyway, I select the style I want, hit Apply and Set Current, and put in some text. Now I list that text, and sure enough, instead of being on L80 it says L-BASE|Standard or some such thing. If I use DTEXT, Style and set it there, my text will be the correct style - but if I go back to the Style dialog box, L-BASE|Standard will show as current again. Acad C3D 2011.
View 3 Replies View RelatedQuestion: I know if I use some of the basic fonts that I am able to click on the properties of that text style to use vertical typing instead of horizontal but for the other fonts this is not an option. How can I get my words to go type vertical using those fonts, specifically Times New Roman. Think of a marker stick for a pipeline valve or pipeline location.
Autodesk 2014 Infrastructure Design Suite - Premium
Windows 7 Professional, x64
I have an offset style, offset based on a Reference Cogo Point and Aligment.
If I change to a difference style, the reference cogo point goes to "none".
I need to change to a Child style, but use the same cogo point.
Is there a way to keep the orginal Value (cogo point)?
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
Civil 3d 2012 - Is there a way to control the size of the text box in by dim style? It is way too close to the text.
View 3 Replies View RelatedI am using Civil 3D 2012 and seem to have a reoccurring problem with the text styles changing. At the start of the day, I will open my drawing and find that my text style has changed and I am not sure what is causing this. I check my text styles and none of my settings has change nor has the text style. Nothing seems to fix the problem other than running a repair of the system.
View 4 Replies View RelatedHow can I change the text style of spot elevation labels. I need to have my existing spot el. show as a different text tyle to the proposed spot el. I have attached a picture.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
example: elevation label is 123 and the style setting in simplex, it used to show all in simplex now one of the number is in arial?
i already tried to create a dummy text style with all the correct setting and type a test word and voila - it shows one of the letter in a different font!
Is there a way to make the Profile band title a specific text style? At the moment it seems that when I access
Profile Properties>Pick Band Style>Profile Data Bans Style>Compose Label>Label style composer
I go to the Contents (under Text) and edit it to bring up the Text component Editor.
In this if I go to the Format Tab the text style is set to annotative, however under that it says font style as an overide. How do I remove the override and set the style of the text to the text style. And how do i change the text style.