Units percision is at 1/64".
I have a custom text style set to a height of 3/32"
I have a custom mleader style set to mtext with text set to that style.
The text height setting in the mleader style dialog is 3/32" and grayed out.
Why create an option and then block us from using it?
All new mleaders are being created with a text height of 1/8". Why?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I have a itemized list in a mtext group and I want to change the text style in the main headings. When I select the heading line it says all style will be changed.
View 6 Replies View RelatedHow to change MTEXT to MLEADER? We often have texts on our drawing - mostly MTEXT and used line to the text.
Recently I started using MLEADER due to that it has added line to the text and looked more professional with consistent line setting out within the text.
The problem is that I don't seem to find a way of converting MTEXT to MLEADER. From the internet search, it seems that adding a LISP created by someone seems to do trick but I would prefer to do from the Autocad software so that all colleagues can use.
how to change the MText Height property in vb.net, i used the below code, Dim mytext As New MText mytext.Contents = txt mytext.height = 130 mytext.Location = Pt mytext.Attachment = AttachmentPoint.MiddleCenter But it is showing an error that Height is an invalid method.
View 2 Replies View RelatedI am using autocad 2011, in that i have some MTEXT's , i am trying to make them at same height & same font, i am selecting the all fonts & then properties & then making all height "3" & font style "arial" but if i double clicked on text it's showing me "1.37" height & "calibri" font
View 2 Replies View RelatedI am using LT 2013. I cannot figure out how to match properties for text. I click on the 2 options and the box witdth, orientation, layer will match but not the style or font. I have tried using Quick Properties to select but have not had any success with this tool. Here is what I did:
Created a style and named it Arial.
Open the Quickselect box.
Apply to : click the box and select the various mtext objects.
Object Type: mText
Properties: Style
Operator: Select All
Include in New Selection Set is checked.
I click Ok and the objects are selected.
Next I go to the Properties Manager and change the style to the one I want to use, bu the text does not change. If Idoubleclick a text object it shows the correct style, but not the correct font. What have I missed doing?
I have some working code that sets the Text Style name to ROMANS inside my Mleader Style called ARROW. Here it is:
(setq dict (dictsearch (namedobjdict) "ACAD_MLEADERSTYLE") ; start setq q
dict1 (member (cons 3 "Arrow") dict) ; code 3 is Mleader Style Description
el1 (entget (cdr (assoc 350 dict1))) ; code 350 is dictionary entity handle
er (tblobjname "style" "Romans") ; new value for MLEADER Text Style
) ; end set
(entmod (subst (cons 342 er) (assoc 342 el1) el1)) ; code 342 is MmTextStyleId - write new vale to mTextStyleId
I want to modify this code so that it sets the Arrow Head Size to a specific value, say 0.125. Having a tough time figuring out the DXF codes and tblobjname to do this.
I am working on a simple function to add/remove a non-printing stamp our drawings to specify a preliminary drawing. The issue is that I cannot seem to get AutoCAD to accept the text height in the Mtext command. Below is the code; try it and see.
(DEFUN NOT4CONSTRUCTION(/ CTR HGT PT1 PT2) (IF (EQ (GETVAR "CLAYER") "NOT4CONSTRUCTION") (SETVAR "CLAYER" "0")) (IF (EQ (GETVAR "CTAB") "MODEL") (SETQ HGT "8'-4"") (SETQ HGT "1"")) (IF (= (ASSOC 0 (TBLSEARCH "layer" "NOT4CONSTRUCTION")) nil) (PROGN (VL-CMDF "-LAYER" "M" "NOT4CONSTRUCTION" "C" "30" "" "TR" 90 "" "P" "N" "" "") (SETQ PT1(LIST (- (CAR (GETVAR "viewctr")) (/ (* (GETVAR "viewsize") (/ (CAR (GETVAR.
[code]....
I have a drawing I am working on regardless of whether I use DVIEW Twist or UCS rotate I encounter the same issue. I start with MTEXT that is parallel to my intended view. However, as soon as I make it annotative and set it to Match Layout the text rotates 90-degrees and is no longer plan readable.The text lives in model space, not paper space. I've even roated the layout viewports in this specific drawing to match, and the text appears correct when viewed through a viewport, but when I jump back to model it is turned on end 90-degrees again! Have I missed a setting somewhere? Shouldnt the text reamin oriented with current view in model space?
I am uploading a link to a video which shows this problem in detail. URL...
I have a routine that looks for an MText date stamp and replace the old date with a new date. The problem is some MText strings appear encrypted. Below is an example:
{\H1.121x;\C1; \LFY 2011-12\l \H0.6252x;04-30-11} This is what I should get when I extract the string (as shown in Property window)
(1 . "\pxi-2.1818,l4.3636,ql,t4.3636;{\fSymbol|b1|i0|c2") is what I get when I extract the group code.
I'm running AutoCAD 2012 on Windows 7.
Have some incoming architectural drawings with loads of different tt font types within mtext. I have globally altered the secondary font styles in format however this does not update the font type within the mtext. Have symplex with areal set and visa versa. Looks like the lot has been set manually different for each individual item of mtext. Nightmare. All mtext is inconsistant and loads of different types on the same drawing. Some idiot must have had a lot of beer.
Ideally I would like to set every piece of text and mtext to simlex. Must be an easy way.
How to change the MText style to Romans in vb.net. At present the text style is Standard.
View 9 Replies View RelatedHow do you change Mtext to A specific style so it always opens up that way.
View 2 Replies View Relatedi did the test with a qleader and everything seem to be functional but mealder have an issue where autodesk have to check this
example: i have a layer called test1 with color green i have a meleader with a Dot as an arrowhead when i go to the viewport and change the vport color to red
well everything changes expt the arrowhead which will take the layer color (green) but if i go to properties and i change the arrow head to closedfilled then it will take the vport color (wierd) i did the test with autocad 2008 to 2012 all the same problem
i did tried with a qleader and it works fine.
I use LT 2010 and have defined a multileader style which is annontative. When i use this each time i have to make he text annotative and set the height even though it uses the right annotative text style.
View 2 Replies View RelatedWhich settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 Replies View RelatedI'm running the following string in a routing that is looping so I get dozens of these prompts. How to supress these? Or, do i have to use to entmake?
(begin loop...
(command ".-Mtext" CSW-Tpoint "W" 0.0 (vl-filename-base (vla-get-imagefile image)) "")
);end loop
Prints to the command line..
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
I am using Inventor Professional 2013 what im trying to do is create a flat pattern so I can send out to get formed. I need the panel to be 7.75" Width 53.50" Height and 2" Depth. When I click unfold where the 45deg is, it doesnt match up with the bend. Im not sure if its supose to be like that or what lines i need to keep to get the correct mesurments.
View 9 Replies View RelatedI'm trying to plan an access road which must run at least 2.5m away from an existing fenceline. I've put a few parallel road lines in at 3m distance, but at the fence bends I decided to put some circles at the bend points to give me a 3m radius. When I did this I was suprised to find that the circle extends further than my access road. I've dimensioned them both up, CAD is telling me they're both 3m away but they're clearly not at the same distance.
View 9 Replies View RelatedIt's my first time using SSA, and I had finally created a network and storm that I thought was working properly (using TR-20 routing with an SCS II storm), until I took a closer look at the profile outputs - and noticed that the graphed Max HGL line does not match the Max HGL listed in the table below. The difference was 856.2 on the graph and 858.01 on the table at one my structures, for example.
The ability to import pipe networks is nice in SSA, but if the output data is always this wacky I may have to go give up on SSA and go back to using Hydrocad.
Have a question about style match.
Like in elements. File-new-photomerge-style match
Where is this in Photoshop CS5?
ilogic function to update local styles to match Style Library?
I have a snippet of code that, on a drawings, deletes the current parts list (if one exists), then inserts a new parts list which I want to be up to date with the Style Library.
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
My customer is having trouble with the part list feature inside the Inventor 2D drawing.
For example, He has a car assembly file with 4 wheels and alot more subassemblies, then he creates a view representation which only visible for 1 wheel.
When he generates the part list in Inventor 2D drawing, he go to part list >filter setting and set to ‘’Assembly view representation’’ but the quantity for the part list is still showing as 4 as per attachment.
change the value manually inside the part list table?
I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.
When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.
Preview and pdf attached.
C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
Trying to create a dynamic block that will multiply the number of neutral and ground blocks as it's stretched.
My power terminal strips can contain 1 to unknown number of circuit breakers, and each circuit breaker requires a neutral and a ground block.
All the similar items in a stip are grouped together, all the circuit breakers, then the neutrals than the grounds.
So depending on how many circuit breakers I have I'll need the same number of neutrals and grounds, but grouped together.
In the attached block I added the stretch action to move the end cover and end stop of the strip down, but don't know how array/space/stretch the neutrals and grounds so they're grouped together.
The ciruict breakers aren't shown as they can be from different manufacturers and therefore different widths.
Tried attaching my block file but get this error message:
"The contents of the attachment doesn't match its file type."
Trouble with PS5 and LR4... when I go to "edit in Photoshop" from Lr... it opens and doesn't match the image in LR (colors)... same goes when saving edited image back to LR... also, when Saving from PS to desktop, it looks terrible unless I "Save for internet" ... how can I get this to all match?
View 1 Replies View Related(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
My color settings are synchronized across all CS applications. I'm trying to see document both as a soft proof and not. Neither mode improves the color differences I'm seeing on screen. Photoshop displays color TOTALLY differently from all other CS applications: Bridge, InDesign, Illustrator & Acrobat.
In the image below, Indesign is on the left. Photoshop is on the right. Image appears in Bridge, Acrobat and Illustrator just like InDesign.
i've checked my monitor screen-up...everything is set to "standard". adjust Ps-CS6 image...it looks swell. print the bad-boy on my Epson NX430...and the image looks dark. or like mud. or too bright.
how can i get the printer, monitor, and Ps-CS6 to be on the same page, colorwise?
I am working on a motion graphic, it contains a background a camrea and a couple 3d layers, when a I render it it a 2 of the 3d layers shake randomly. This does not happen in the preview. Using CS4
View 2 Replies View RelatedI'm trying to cut out a selection using Quick Select (all refine edge settings off) and then paste into a new layer. However, I can't get a 100% pixel perfect alignment once I paste. Cut/Paste using the rectangle select does match 100%. The quick select tool should allow for 100% pixel perfect alignment, correct?
This is before cutting (note middle circle)
This is after cut/paste and aligning
