AutoCAD Inventor :: Ilogic Function To Update Local Styles To Match Style Library

Feb 21, 2013

ilogic function to update local styles to match Style Library?

I have a snippet of code that, on a drawings, deletes the current parts list (if one exists), then inserts a new parts list which I want to be up to date with the Style Library.

Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit

View 4 Replies


ADVERTISEMENT

AutoCAD Inventor :: New Style Missing From Local Styles / Yet Appears In All Styles?

Aug 8, 2012

We've created a new parts list style for a border.When the border tempalt file is on the c: drive...everything works hunky dory...parts list, revision tables, etc.But as soon as we copy and paste that border into the template library folder for new drgs...the parts list style is missing from the local styles?

So to make it appear on the new document...the style manager has to be set at all styles and the new parts list style has to be saved to the document?What aren't we doing to make it appear on the template?

Also note that because the drawing border template is in a template folder as part of the design projects...it is NOT editable...so it has to be edited outside the template folder.

View 3 Replies View Related

AutoCAD Inventor :: Update Styles Library To Keep From Getting Styles Conflict Error Box

Jul 6, 2011

How do update the styles library to keep from getting the Styles Conflict error box.  I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.

I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.

View 9 Replies View Related

AutoCAD Inventor :: ILogic Update Styles On DWG

Dec 21, 2011

I am after a way of accessing the update styles on dwg so that I can run with rule below as most of our drawing stds have changed and old dwgs need updating the work flow is as follows.

 I need to access manage tab then update styles,then yes to all,OKUpdate all sheetsfind all parts list within all sheet and then annotate , style on format tab and then select Parts list - this will change all my old parts list to current style definition.Either run at begining of code below or run as seperate code

On Error Resume NextDim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocumentDim Sheet As Inventor.SheetDim Cursheet As String Cursheet = oDrawDoc.ActiveSheet.Name For Each oSheet In oDrawDoc.Sheets oSheet.ActivateDim oPartsList As PartsList oPartsList = oDrawDoc.ActiveSheet.PartsLists.Item(1)If Not oPartsList Is Nothing Then Resume Next'Call oPartsList.Sort("ITEM")Call oPartsList.Sort("PART NUMBER", 1, "DESCRIPTION", 1, "QTY", 1)iLogicVb.UpdateWhenDone = TrueActiveSheet = ThisDrawing.Sheet("Sheet:1")ThisApplication.ActiveView.FitEnd If Next

View 4 Replies View Related

AutoCAD Inventor :: Style Library Overrides Styles

Jul 18, 2013

I make an idw template at home and at work i get this message that says style library will override the listed styles, and enables me to choose if i want to impose the style library or the styles in the template.

I want to impose the styles in the template and the message says that in order to achieve that i have to delete the styles.

Which styles to delete and how?

When i use the purge styles command it's empty.

I understand that duplicate names of styles make the problem, but at home i checked 2 of the styles and found them the same as at work, but maybe i don't remember all the changes.

Is the solution simply to make new styles with new names?

View 9 Replies View Related

AutoCAD Inventor :: Implement New Style Library For Dimension Styles

Oct 15, 2012

I am trying to implement our new Styles Library for our Dimension styles. I keep getting this error (see attached).  

I have done everything I can think of, I have mapped the default library to the new styles library location on the server. I have tried everything.

View 6 Replies View Related

AutoCAD Inventor :: Setting Default Dimension Styles Different Than Object Defaults In Style Library

Apr 5, 2012

We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.

This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.

However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.

So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?

View 9 Replies View Related

AutoCAD Inventor :: Style Update (or Style Update Check) Upon Open Of A Drawing?

Nov 21, 2013

I am wondering if it is possible to do a style update (or style update check) upon open of a drawing? 

The example would be that I have stuff made from way back that the colors/dimension sytles ect dont match the current standard and upon opening a file where they are not current, it would either prompt to update immediatly OR update automatically with no prompting (preferred method).

I am doing a massive amount of updates from old files recently and to save myself 1 - 3 clicks per drawing would be wonderful.

View 5 Replies View Related

AutoCAD Inventor :: Local Update Button

Dec 27, 2011

I made a significant change to an assembly that messed up several constraints.  I fixed all the constraints using the red cross button but the local update button is still lit up and won't do anything when I click it. 

View 2 Replies View Related

AutoCAD Inventor :: Can't Copy Local Custom Material To Library

Jan 16, 2013

When I implemented Inventor Pro 2013 I added all our custom materials to the Inventor Material Library.  This library is not local but on a shared network drive that everyone in my company can access.You can clearly see that it is not locked and is write enabled.  I dragged the local material to the library and I shows up in the library.  When I close and exit Inventor and re-open, it is no longer available.

You can clearly see by my screen capture that the new material was added to the library.  Why isn't is updating the library?

I have managed our Inventor styles and libraries for Inventor since 2003 (R5) and I never had as much problems getting my mind to wrap around this new appearances change that Autodesk has made.  I have wasted 4 hours this morning trying to add a simple custom material to my library and I cannot.

View 3 Replies View Related

AutoCAD Inventor :: 2012 Crashing Upon Local / Global Update Execution

Nov 9, 2011

So 2011 had some issue and I though 2012 would get those fixed. I was wrong. More problems occur. With 2011 I was able to open assemblies directly through vault. Now with 2012, since the vault issue updates as it opens, I crash on any sizeable model or assembly. So now just to open  a file, I must get it, then go to inventor and open it, and hit no when the refresh window come up. If I hit yes, it crashes. If I hit no it open, then if i hit local/global update it crashes. So technically I cant do any new work with any of my larger assemblies (2000+ parts) I have sent out numerous error reposrt, only for autodesk to say that they can replicate the problem. I have SP1 installed, and this is happening with other users at my company as well.

System:

Windows 7
64 Bit
Solid State HD
24GB RAM
Xenon Processor
Nvidia Quadro FX 580

View 1 Replies View Related

AutoCAD Inventor :: Cannot Change Parameter Value For ILogic Unless User Is A Local Admin On PC

Aug 23, 2012

I have a users who cannot change parameter values for iLogic unless user is a local admin on the workstation. This machine has just been upgrade to Inventor 2013.

View 1 Replies View Related

AutoCAD Inventor :: Rip Command - Set Proper Thickness In Sheet Metal Styles To Match Model

Jun 5, 2013

When I use the rip commandment a message appears " for proper folding the model should have uniform thickness equal to the model parameter thickness. Please set the proper thickness in the sheet metal styles to match your model".

View 9 Replies View Related

AutoCAD Inventor :: Combined Styles Library Use

Oct 7, 2011

I am in the middle of an upgrade from 2009 to 2012 and have a styles use question. I am running three flavors of Inventor: Inventor, Inventor Professional, Inventor Factory (based on Pro). The styles library that I am starting with was migrated from 2009 to 2012 and was running both IV series and Pro Seats. Although no real Pro functionality was ever used so any associated styles were still as delivered for the most part. My working environment is a single Vault project setup where all the styles and libraries are local copies on each workstations drive. All the standard content (styles and libraries) stay checked out to myself on my machine for protection.

So here is what I did to make an all inclusive styles library that all flavors of products will use. pick this apart if you see something wrong with the method.

1) I started with the migrated styles library from 2009

2) As I installed the different flavors I copied the new styles libraries over the existing migrated one without allowing it to "overwrite" any existing styles files. This only populated the styles libraries with any thing I was missing from any of the flavors.

3) I use this combined library on all station regardless of the flavor installed. So some stations have styles on them that are not in use by the installed software.

View 6 Replies View Related

AutoCAD Inventor :: Setting Standards In Styles Library

Jun 13, 2012

We have three divisions in my company.  Each division uses a different set of drawing templates.

With all of that said, in my division we are trying to setup a certain said standard that was copied from the out of the box standard ANSI one as a starting point.  We were hoping to have this standard reside only in our drawing templates, but the way the styles is handling it, it would appear that this standard has to be updated/added to the global styles library.

Is this a true statement that this has to be a global styles update or is there a way to have a said standard be the default setting within just certain drawing templates without being seen or affecting other drawing templates?

View 8 Replies View Related

AutoCAD Inventor :: Missing Material Styles From Library

Aug 16, 2012

My program is missing a few material styles from the content library, whenever I use them on a part they just stay the default color. How do I replace them without having to re download the whole program?

View 3 Replies View Related

AutoCAD Inventor :: Sheet Metal Styles - Import Library?

Oct 10, 2013

I have custom material, appearance, and sheet metal libraries. I exported all my sheet metal styles. When I try to import them, I get this message:

Error loading file 'file:///M:/00_Styles/SheetMetalStyles.styxml'.

Cannot find reference to Colors style named 'Stainless - 2B' in file:///M:/00_Styles/SheetMetalStyles.styxml.

Style 'Materialstainless Steel, 304 2B' has not been loaded from file:///M:/00_Styles/SheetMetalStyles.styxml.

The color and material it is looking for are both in the active style library.

Inventor 2013
Win 7 Pro SP1 (x64)

View 1 Replies View Related

AutoCAD Inventor :: New Template Styles Library Error Message

Mar 7, 2012

what this error message means and how to fix it?

View 2 Replies View Related

AutoCAD Inventor :: Save Hole Notes To Styles Library And Templates?

Jan 12, 2012

Why do I have to select edit hole note each time I use the hole feature tool? It will not keep my settings to show qty.

It seems that I should be able to save it to my library and make it the default. I have saved library,templates all with zero luck.

See 2 screen shots in the attachment.

View 4 Replies View Related

AutoCAD Inventor :: ILogic Design - Why Work With Local Rule But Errors On External Rule

Dec 9, 2011

I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;

"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"

He is now trying to make this an external rule but gets the following error

Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.

The more info tab says:

System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)

View 2 Replies View Related

AutoCAD Inventor :: ILogic Code For Visual Styles - Shaded With Edges

Aug 24, 2012

Would like to have this script in my template for assemblies. So when user opens up the assembly it changes the visual style automatically.

View 2 Replies View Related

AutoCAD Inventor :: Migrating Style Library

Jul 12, 2013

I have been recently put in charge of all things Autodesk at my company.  We have just installed 2014 software on our machines and I'm told that I need to migrate the styles library from 2013 to 2014.  Here's the thing though, we have our Inventor templates and design data on a network drive for all to access. 

I see where there is a style manager included in the Tools of Inventor but I open it up and I can't make heads or tails of it.   

View 4 Replies View Related

AutoCAD Inventor :: Can't Save To Style Library

Jan 21, 2013

Can't save to Style Library

View 2 Replies View Related

AutoCAD Inventor :: Updating Style Library

May 22, 2007

I made some changes to layers and line scales in our idw template and then saved them to the style library to keep things synchronized. When I started a new drawing I got a style conflict message as if I had not saved the changes to the style library (see attached). My project file is set to Use Style Library =Yes, and what's more strange is that only six of the layers didn't update in the style library while the rest did? These six layers indeed show they need to be updated in the style library when I went back into the template, but when I update them the same thing happens.

View 9 Replies View Related

AutoCAD Inventor :: Physical Update Using ILogic?

Oct 12, 2011

Currently I am using I-logic and a form.  I have an assembly that I am pushing a volume from a part to the main assembly.  The volume updates in the part fine.  The issue is with the form is not updating when the file parameter updates.  If I exit the form and run the rule manually then the form updates.  how to update the form at the same time?

View 1 Replies View Related

AutoCAD Inventor :: ILogic Update Form

Sep 13, 2013

I´m having a bit of an issue with a form.

I have a global form which is exactly made for a specific assembly for configuration of this very assembly. To make things easier for the user I call another external rule which only opens exactly this assembly.

Now when the user opens the form the assembly is not open and obviously can´t reference the used parameters.

Even after loading the assembly the parameters are not available, which results in something like this:

So this is a really simple question, is there a way to update a form so that it rereads the parameters from the assembly?

What I tried is using iLogicForm.CloseGlobal("Name of form") to no availability and then open it again with iLogicForm.ShowGlobal("Name of form").

But I couldn´t find any further info on the iLogicForm Commands.

View 3 Replies View Related

AutoCAD Inventor :: Put Immediate Update Box On Ilogic Form

Aug 17, 2012

I am trying to put an immediate update box on my form in ilogic.  I want to be able to change parameters on my form without updating the model.  There is this option in the parameters window but not in the form.  How can I accomplish this?

View 1 Replies View Related

AutoCAD Inventor :: ILogic To Update Some Prints

Jul 28, 2012

I am new to the ilogic. I am wanting to use ilogic to update some prints as needed.

 I need to create and external rule to:

1) migrate the drawing to the lastest inventor version (2012),

2) copy all drawing resources (borders, title blocks, and sketched symbols) from a template file (.idw),

3) replace the title block and border with specified block and border. 

View 9 Replies View Related

AutoCAD Inventor :: ILogic Function To Change Decimal Marker From Full Stops To Commas

Apr 5, 2013

e.g. 25,00mm instead of 25.00mm.

I have a huge list of drawings I need to apply this update to.  Updating Styles isn't really an option as we haven't enough consistency in the styles we have used.

Inventor 2013 Certified Professional

Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit

View 3 Replies View Related

AutoCAD Inventor :: How To Make Style In Library Standard

Nov 6, 2013

How do I make a style in the library standard? I made new styles in the library for a revision table and parts list, but when placing them in an IDW I always get the standard tables.

It's not a big deal to change it in the format tab after placement, but when having 50+ sheets/daily its getting annoying.

View 1 Replies View Related

AutoCAD Inventor :: Style Library Creation / Migration?

Apr 18, 2012

I am looking at moving from controlling my Styles in template files into a Style Library.  So how exactly would I best do this?  Create a new Style Library in the Style Library Manager, set it in "Style Library 1" (this makes the new Style Library "active", yes?), open my template files, and under the Manage tab, "Save" the document styles to the new Style Library?  Should I then delete my Document Styles from the template?

When you get a new release of Inventor, how do you generally go about pushing your Style Library into the new release?  Do you just copy-paste the old Style Library from the old release "Design Data" folder into the new release "Design Data" folder?  Do you start a new Style Library in the new release, compare to the old Style Library, and push the old into into the new?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved