AutoCAD Inventor :: Style Library Creation / Migration?
Apr 18, 2012
I am looking at moving from controlling my Styles in template files into a Style Library. So how exactly would I best do this? Create a new Style Library in the Style Library Manager, set it in "Style Library 1" (this makes the new Style Library "active", yes?), open my template files, and under the Manage tab, "Save" the document styles to the new Style Library? Should I then delete my Document Styles from the template?
When you get a new release of Inventor, how do you generally go about pushing your Style Library into the new release? Do you just copy-paste the old Style Library from the old release "Design Data" folder into the new release "Design Data" folder? Do you start a new Style Library in the new release, compare to the old Style Library, and push the old into into the new?
View 2 Replies
ADVERTISEMENT
Sep 26, 2012
Could you tell me or give me a link to the procedure to migrate the materials library. I have a materials library that I created in 2012 and I would like to migrate it to 2013.
View 4 Replies
View Related
Apr 24, 2012
Is there a good source of material mechanical properties on the internet? I have been creating a custom material library with the materials I normally use and I've just been duplicating a material from the supplied libraries to create mine with a name change only. I'd like to include the correct mechanical properties if I could find a source of information that has all the properties in the format that the Inventor 2013 materials editor requires.
View 5 Replies
View Related
Jul 12, 2013
I have been recently put in charge of all things Autodesk at my company. We have just installed 2014 software on our machines and I'm told that I need to migrate the styles library from 2013 to 2014. Here's the thing though, we have our Inventor templates and design data on a network drive for all to access.
I see where there is a style manager included in the Tools of Inventor but I open it up and I can't make heads or tails of it.
View 4 Replies
View Related
Jan 21, 2013
Can't save to Style Library
View 2 Replies
View Related
May 22, 2007
I made some changes to layers and line scales in our idw template and then saved them to the style library to keep things synchronized. When I started a new drawing I got a style conflict message as if I had not saved the changes to the style library (see attached). My project file is set to Use Style Library =Yes, and what's more strange is that only six of the layers didn't update in the style library while the rest did? These six layers indeed show they need to be updated in the style library when I went back into the template, but when I update them the same thing happens.
View 9 Replies
View Related
Jul 18, 2013
I make an idw template at home and at work i get this message that says style library will override the listed styles, and enables me to choose if i want to impose the style library or the styles in the template.
I want to impose the styles in the template and the message says that in order to achieve that i have to delete the styles.
Which styles to delete and how?
When i use the purge styles command it's empty.
I understand that duplicate names of styles make the problem, but at home i checked 2 of the styles and found them the same as at work, but maybe i don't remember all the changes.
Is the solution simply to make new styles with new names?
View 9 Replies
View Related
Nov 6, 2013
How do I make a style in the library standard? I made new styles in the library for a revision table and parts list, but when placing them in an IDW I always get the standard tables.
It's not a big deal to change it in the format tab after placement, but when having 50+ sheets/daily its getting annoying.
View 1 Replies
View Related
Nov 4, 2011
I am trying to turn the style library off in inventor 2012, I can't seem to be able to do this. I know in the past version I simply turned it off in the project editor, but I only have the read-write option now. All my drawing settings are saved to my Template, when i open the template, it changes to the style library settings, which I don't want.how to save my settings to style library this is why I have never used it.
View 2 Replies
View Related
Sep 13, 2005
Is it possible to add all RAL colors to the Inventor style library?
(IV10 SP1)
View 7 Replies
View Related
Mar 11, 2013
I copied my catalog from Windows 7 PC (along with all photos) to a new iMac OXS 10.8. Installed Lightroom 4.3 on the iMac (with photos and catalog in same relative locations as previously in the photos folder)
In the Lightroom library on the iMac, all my photos have an exclamation mark in the top corner, and when opening any of them, I get a comment suggesting metadata is in conflict.The actaul metadata in the photos looks fine.Is there a global command with which I can cancel these exclamation marks?
View 8 Replies
View Related
Oct 15, 2012
I am trying to implement our new Styles Library for our Dimension styles. I keep getting this error (see attached).
I have done everything I can think of, I have mapped the default library to the new styles library location on the server. I have tried everything.
View 6 Replies
View Related
Feb 21, 2012
If my style library is enabled in project it always refresh definitions whenever i create a document using template and press update the window in snapshot shows up.
Is there any way to do vice versa - i.e. get all these items updated in style library as per the current document setting.
View 5 Replies
View Related
Feb 12, 2013
I can’t figure out how to copy a material (outside style library) from one part to another. Or how to do it with exporting and importing the material through a styxml file.
View 6 Replies
View Related
Apr 26, 2011
Just noticed 'use style library = No?' no longer exists in 2012 only 'read only' and 'read-write' are come uo when you RMB 'use style library' in the Projects dialog, is this correct or have I made an error during installation?
View 4 Replies
View Related
Jan 8, 2014
info on the following error message when saving to the style library.
View 5 Replies
View Related
Sep 7, 2012
I have copied the "Diamond Plate" from the Inventor Apperance Library to my document. Now I want to edit the texture that this style is using.
1. Where is the texture map that this style using located? When I edit the style, I can't tell what is telling it the filename. I have mundged every file on my hd that it could possible be (hoping it would cause an error), but that didnt work either. Another thing I tried was in the QAT "Duplicate as Generic", but that did not show me the texture file either.
2. Is there a way to change the angle of the texture?
View 1 Replies
View Related
Sep 9, 2011
I'm trying to utilize the piping and routed systems tool to run some pipe, but when I setup my pipe styles, it cannot find the xml files for the pipe, fittings, etc. I know I am connected to my content server as I can insert individual fittings and manually place pipe lengths. I am running Inventor Professional 2009
View 6 Replies
View Related
Sep 29, 2011
I use a style library. Have it in a read-only mode in the ipj file. My drawing created a new template with a rev table with required columns.
Now, I create a new drawing file and choose this template. add few views, insert a rev table. The rev table columns headings are the same as in the template. But the column widths aren't same as in the template.
I use manage->update. It warns me that the drawing would be matched as per the style library. I agree & OK.
No use, the columns are not same size? Though the style is read only from the drawing, I go to open the style editor to check the column widths. They are different from the template.
View 8 Replies
View Related
Nov 15, 2011
I cant change this to read / write. I'm using a vault project. Anyway of doing this so I can save materials to the style library using a vault project?
View 2 Replies
View Related
Feb 21, 2013
ilogic function to update local styles to match Style Library?
I have a snippet of code that, on a drawings, deletes the current parts list (if one exists), then inserts a new parts list which I want to be up to date with the Style Library.
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 4 Replies
View Related
Apr 5, 2012
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
View 9 Replies
View Related
Apr 18, 2012
Is there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
View 8 Replies
View Related
Aug 6, 2012
How text style creation works. It appears that I can create a text style in a drawing but it is not session related or Global and I can switch between to Styles within a drawing but not outside within a new drawing. How do you create a Text Style that is available at any time and in any drawing. Is this generaly a system setting that is controlled by an admin.
View 7 Replies
View Related
Jun 3, 2013
I am creating walls so im using mline with mstyle. the problem is when I create the mline for different walls. for example drawing mline for a wall that is 20 units and then moving to a wall that needs to be 30.
is there any way to change the mline style or offset in creation time?
View 3 Replies
View Related
Aug 8, 2012
We recently upgraded from 2012 to 2013.I set up a task in Task Scheduler to migrate one of our working folders to migrate to the new version.When I open a part or any other file from that migrated folder and save it I get the attached message.
The message states the file has been migrated. Why do I need this messge? Or has the file been migrated?
View 1 Replies
View Related
Sep 25, 2013
I am currently doing a migration of files to 2014. During the migration, does windows active window you are working in deactivate while the Task Scheduler is running? Trying to type an email got a bit annoying. Minimizing the Task Scheduler will only work some of the time.
Autodesk Product Design Suite Premium 2014 SP1
ASUS G750JX-DB71
Windows 7 Pro
4th Gen Haswell i7-4700HQ
16GB Kingston DDR3 HyperX RAM
NVIDIA GeForce GTX 770M
View 2 Replies
View Related
Oct 28, 2013
We've finally nibbled the bullet and upgraded to 2014. I'm getting errors in the Task Scheduler logs about missing files in various projects. It would appear that (almost) without exception, the failed files are all Content Center parts that were inserted as custom parts. Do I need to run a migration on the Content Center parts (Inventor/ContentCenter Files/R2013/en-US) in order for the custom parts to migrate properly?
View 9 Replies
View Related
Oct 26, 2012
I work with a AutoCAd drawing that's been drawn in LisCad, then Output to AutoCAD for continuing work.
I want to use a font that a collegue used on his drawing (he used Microstation but all our drawings are first done in LisCad), I have it in the AutoCAD font library, but for some reason it doesn't show under properties in the STYLE drop box in my drawing... Is that because my drawing comes from Liscad?
I guess I can copy a word from another AutoCAD drawing to get it in, but if I can get in into my drop list it would be handy!
View 1 Replies
View Related
Jul 10, 2012
I would like to change the look of the point that I draw ni autocad.
When i draw a point (1 on the joined picture), I can choose different style (point, circle, square, ...) and increase or reduce the size (2 on the joined picture)
point.PNG
but the model stay allways thin, i would like to modify my point to look like the 3 ont the joined picture.
I know that 20 models are allready a lot of choice, but is there a possibility to modify the library of the point?
View 9 Replies
View Related
Sep 19, 2011
Using 2011.
I have lists of Documents I am altering and saving automatically in a loop, The problem is that if the file needs to be migrated you get a dialog box in your face for every file in the list. How can I temporarally turn the dialog off?
ThisApplication.SaveOptions.PromptSaveForMigration = False
Does not do it.
View 1 Replies
View Related
