AutoCAD Inventor :: Custom Materials Library Creation

Apr 24, 2012

Is there a good source of material mechanical properties on the internet?  I have been creating a custom material library with the materials I normally use and I've just been duplicating a material from the supplied libraries to create mine with a name change only.  I'd like to include the correct mechanical properties if I could find a source of information that has all the properties in the format that the Inventor 2013 materials editor requires.

View 5 Replies


ADVERTISEMENT

AutoCAD Inventor :: Can't Apply Custom Appearances To Custom Materials

Apr 4, 2013

I am trying to create custom Materials in Inventor 2013.  I have been able to create the custom appearances I want use on the materials and store them in the Inventor Materials Library.

After creating the custom appearance, Ive created new materials. When I try to change to new material appearance from default to my custom appearance, upon hitting the 'apply' button I get an error message which reads, 'failed to updated style'.

View 1 Replies View Related

AutoCAD Inventor :: Add New Materials To Library

Mar 1, 2012

I came up with 2 questions related to my Inventor 2012 install :

1. Is there a way to install only Showcase 2012 from install kit if on fist "session" I've unchecked it from customize-installation? How ?

2. Can I add new materials to library ? If so is there a website with samples to upgrade inventor material library with new ones?

View 2 Replies View Related

AutoCAD Inventor :: Materials Library Migration

Sep 26, 2012

Could you tell me or give me a link to the procedure to migrate the materials library.  I have a materials library that I created in 2012 and I would like to migrate it to 2013.

View 4 Replies View Related

AutoCAD Inventor :: Style Library Creation / Migration?

Apr 18, 2012

I am looking at moving from controlling my Styles in template files into a Style Library.  So how exactly would I best do this?  Create a new Style Library in the Style Library Manager, set it in "Style Library 1" (this makes the new Style Library "active", yes?), open my template files, and under the Manage tab, "Save" the document styles to the new Style Library?  Should I then delete my Document Styles from the template?

When you get a new release of Inventor, how do you generally go about pushing your Style Library into the new release?  Do you just copy-paste the old Style Library from the old release "Design Data" folder into the new release "Design Data" folder?  Do you start a new Style Library in the new release, compare to the old Style Library, and push the old into into the new?

View 2 Replies View Related

AutoCAD Inventor :: Materials Library Export / Import

Jul 12, 2005

I would like to be able to export the complete materials library into for instance Excel and edit and add new materials and then import the whole thing into Inventor again.

View 3 Replies View Related

AutoCAD Inventor :: Import XML Files To Materials Library

Jun 1, 2012

Does a process for importing INDIVIDUAL materials (saved as some_material.styxml) that had been exported from Inventor 2011 or 2012 into the 2013 Inventor Material Library?

I am not asking about converting the old libraries -- I know how to do that -- these are materials that were created for one-time (supposedly) use and exported from the 2012 Inventor file, but never saved to the older Inventor styles libraries. Operation was EASY in 2012 -- click the "Import" button on the styles manager dialog box.

No such button on the new materilas library manager, or am I missing something?

Only way I have been able to do this is create a 2102 part, import the STYXML file, apply the material to the 2012 part, then save the part & open it in 2013 & let 2013 import the style. Once the material style has been imported this way, it can be added to the Inventor Material Library, but this is a really nutty workaround that requires Inventor 2102 to be available...

View 9 Replies View Related

AutoCAD Inventor :: How To Save Materials To Style Library Using Vault Project

Nov 15, 2011

I cant change this to read / write.  I'm using a vault project.  Anyway of doing this so I can save materials to the style library using a vault project? 

View 2 Replies View Related

AutoCAD Inventor :: Custom Parts List Creation

Nov 21, 2013

I'm having a bit of trouble creating a new parts list style.  I really want to have two styles to choose from in all three of my .idw templates.  I understand how to create them but I can't save them to the library.

Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot

View 4 Replies View Related

AutoCAD Inventor :: How To Add CUSTOM Materials To Content Center Families

Oct 26, 2011

We use different types of Stainless Steel fasteners. For example 18-8, 304, 316, etc. When I use the "Material Guide" in the Content Center Editor it only has the Autodesk default materials listed. How do I add CUSTOM materials to this list to create new families with my custom materials?

View 1 Replies View Related

AutoCAD Inventor :: How To Add Custom Materials In Actual Material Properties

Jul 4, 2011

I am looking for ways to add actual custom materials - not (just) in appearance, but in actual material properties (elasticity, etc). I have looked at wiki and searched this forum (and others) but I haven't been able to find anything of the sort... but the properties of the few aluminium alloys available are not those that we use... besides that we need them at specific temperature ranges (and honestly, I haven't been able to find any temperature controls in the FEA yet either.) And.. is there a more direct, faster, way to assign materials then [big I Pro button] > iPropperties > Physical? Right click on the solid and selecting "material" seems so much more ideal.

View 2 Replies View Related

AutoCAD Inventor :: Set Up A Custom Part Library?

Dec 19, 2013

We produce a piece of equipment with numerous parts and assemblies that we would like to use as a base model. We do not or will ever use vault so I'm trying to come up with a library/content center area where I can store the parts and assemblies that then can be inserted into new assemblies which would create a completely new design based on existing parts. My problem is lack of experience in setting up a good library/ content center area, I do not know what would be an acceptable plan of attack, right now I have moved the complete assembly onto the server in its own location but this is where I get stumped.

View 1 Replies View Related

AutoCAD Inventor :: Custom Mat Library Size?

Oct 30, 2012

Is there some reason my 2013 custom material library size is so big. I have a 16 different appearances and 35 different physical properties  with a total of 71 separate materials and then file is nearly 3 megs. 99% of the appearances and physical props are Inventor standard.

The default Inventor Library with considerably more information is WAY smaller.

So what's going on, am i just building the library wrong?

I also have a different library that is over 21 megs, it contains a number of different materials that is comperable to the default Inventor one but again only 16 appearances and 35 phsical props. It's completly unusable.

Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB

View 8 Replies View Related

AutoCAD Inventor :: Add Material To Custom Library

Jan 29, 2013

I have recently started playing with the new materials and appearances browsers - what a nightmare.

So I created a custom library as described in the "Materials and Appearances" whitepaper from Autodesk.

Bottom left corner of material browser > create new material

> edit material: change its name, density etc

Why can I not add it to the new custom library - from document materials?I tried to drag and drop - no success.

I tried to right click > add to > xxx material library - no success.It does however let me drag and drop to the "favorites".
 
Inventor Professional 2014.
Windows 7 64 bit.

View 8 Replies View Related

AutoCAD Inventor :: Custom Library Of Parts?

Nov 8, 2013

I've created a folder on our server that contains commonly used parts by several users. My thought was that by referencing this folder as library in their projects, they wouldn't be able to change the parts. I could also build assemblies referencing these common parts so they wouldn't have to be copied into each project folder...

During the save option in their assemblies, the parts show up as NO (in a library), but this can be bypassed by "YES TO ALL".Is this not the right process for setting up a custom part library?Also, the users are experiencing some lag issues... Could this be the reason?

View 4 Replies View Related

AutoCAD Inventor :: Use Custom Library In Frame Generator?

Jan 26, 2012

My custom library works fine when I try to insert a part from content center, but when I try to use frame generator my library is not seen.  I set the "Standard Organization" and "Standard" family property fields both to "DYNA" hoping that standard would show up in the frame generator "Standard" drop down menu but it doesn't.

I saved a copy of a pipe family to "My Library" and made it an independant family.

View 1 Replies View Related

AutoCAD Inventor :: Publishing Custom Library Of Rivets

May 5, 2013

I would like to publish the custom threaded rivets library. I wish I could add it to Rivets section but it is not available in the Component Authoring.

Actually I did create it in the Clevis Pin section but I would like some order in my library where everything is set on a right place. I mean I wish my rivets will be placed in Rivet section.

Possible to make Rivets available in the Component Authoring?

There are any ways to move it to other section after Publishing? Is it possible to create the custom section which will be available and visible in Component Authoring?

View 3 Replies View Related

AutoCAD Inventor :: Custom Material Library Keeps Failing

Feb 14, 2013

I have gone thru what appears to be the correct steps in creating a custom material library a total of 3 times.

Once I finish customizing the library while in Inventor, I add it to my project file and make it the "active" library.  I test it with each of my part & assembly templates on my local machine without an issue.  When I log into another work station, locate and add the new library to their project file Inventor gives me a "no materials found".  So I go back to my machine to check and the library is no longer valid for me either.

I can see the library on the server, the file size is 3.6MB so it has substance. I cannot figure out what I am doing that is causing the library from locking up completely when I try to use it with another work station. Also, if any way to make my library usable again that would save me about 8 hours of work.

all of our stations use the "generic.ipj" project file.

View 4 Replies View Related

AutoCAD Inventor :: 2013 Custom Material Library

May 4, 2012

I've made my own material library containing a short list of materials from the Inventor default library.  And I have set my Project ipj to use it as the default library.  All works OK.  But, every time I make a new project ipj I have to go find my custom library adsklib file to add it to the project.  Is there a certain folder the adsklib file need to live in so that new projects will pick it up automatically?

View 2 Replies View Related

AutoCAD Inventor :: Altering Custom Library Parts BOM

Feb 3, 2012

I have created a custom library (custom content center), and that went fine. All I done was copy a family of RHS from the desktop content center into my custom content library. I then created a small test assembly with frame generator to see if I could use my custom library. It worked fine BUT when I place it into a drawing and create the parts list, the parts list shows all the info in an order that is no use to me. (see attached *SNIP A*)

What I would like is that when I use frame generator along with my custom library, then take it into a drawing, the parts list needs to look like the attached file (see attached *SNIP B*).

So really, I want the "Unit QTY" to vanish, I want the "QTY" to show the Quantity of that part within the assembly, I want the "stock Number" to vanish and I want the description to show the size of the member (what the "stock number" currently shows) along with the length of the member.

Now I know I can edit all this for each part within the parts list BUT I need the parts list to show this info EVERY time AND automatically.

View 9 Replies View Related

AutoCAD Inventor :: Export Content Center Custom Library

Dec 11, 2013

Is there a way to export to share with other a custom content center derived library?  (without vault)

View 2 Replies View Related

AutoCAD Inventor :: Frame Generator Custom Shapes Library

Feb 1, 2012

I have a bunch of custom shapes I use in the frame generator and I want to transfer them to another computer.  Where are these located and how would I transfer them?  I'm using Inventor 2012.

Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot

View 7 Replies View Related

AutoCAD Inventor :: Can't Copy Local Custom Material To Library

Jan 16, 2013

When I implemented Inventor Pro 2013 I added all our custom materials to the Inventor Material Library.  This library is not local but on a shared network drive that everyone in my company can access.You can clearly see that it is not locked and is write enabled.  I dragged the local material to the library and I shows up in the library.  When I close and exit Inventor and re-open, it is no longer available.

You can clearly see by my screen capture that the new material was added to the library.  Why isn't is updating the library?

I have managed our Inventor styles and libraries for Inventor since 2003 (R5) and I never had as much problems getting my mind to wrap around this new appearances change that Autodesk has made.  I have wasted 4 hours this morning trying to add a simple custom material to my library and I cannot.

View 3 Replies View Related

AutoCAD Inventor :: Migrating Custom CC Library From 2013 To 2014

May 28, 2013

I have upgraded to Inventor 2014 and I'm having trouble transferring my custom content center library (local machine, no server).  My understanding was that I copy the .idcl and .idz files from the old folder to the 2014 folder, open the projects dialog box, configure content center libraries button, and use the update tool button.

However, in the configure libraries dialog box my custom library doesn't even show up in the list along with my ANSI, ISO, "My Library", etc. Restarting Inventor didn't work.

View 4 Replies View Related

AutoCAD Inventor :: Custom Content Centre Library Appears Empty?

Jul 25, 2010

I typically use basic ISO fastners in conjunction with the bolted connection generator. Just now I have discovered the ability to add a custom library to the content centre. This appears fantastic as I no longer have to sift through the 10 - 30 or so items available in each category to complete my bolted connection.

However I am experiencing a delima

I have created a custom library called "My Favourites" and it contains 6 bolt families, 1 spring & flat washer family and 1 nut family. All families are derived from the ISO standard (bar the spring washer which is DIN 128) and all thread pitches for the respective nut and bolt connection(s) match.

The problem I am experiencing is when I execute the bolted connection command I can add the bolt, 2 flats and 1 spring washer yet when I come to close the connection with a nut the nut selection box is empty?

I have the active project configured with "My Favourites" "Inventor Feature" & "Inventor Routed Systems" as the only in use libraries. Secondly, I have verified the existance of the nut(s) in "My Favourites" in the Content Centre Editor.

I am using Inventor 2010 updated to SP3 on a standalone machine, running Windows 7 Ultimate (w/ latest updates)

View 2 Replies View Related

AutoCAD Inventor :: Frame Generator And Custom CC Library Naming Convention

Jan 19, 2012

I have set up a Custom CC library that contains structural shapes.In the Family Table I have a Stock No column which references the value in my DESIGNATION columnThe Stock No column is mapped to Project.Stock NumberUnder Template Parameter (in Parameter Mapping) I have mapped StockNo to Design Tracking Properties: Stock Number.

When I use Frame Generator to add a structural shape, from my library, the name shown in the Model Browser is formatted as follows (Standard)+(Unique Number) and not (Standard)+(Stock Number)+(Unique Number).

How to get the Stock Number to show in the model Browser. How to get the members name to show, with the correct format, in the Model Browser as this will make identifying members in an assembly easier.

Please see attached for Model Browser pic.

Gigabyte Q1542
Win 7 Pro 64Bit
i5 - 3230M
8 GB Ram
Intel HD Graphics
Nvidia GeForce 640M / 2GB with Optimus

View 4 Replies View Related

AutoCAD Inventor :: 2013 Appearances - Adding New Colors In Custom Library

Jan 8, 2013

First, I have not grasped the extent yet of how the new appearance library works.. we don't get crazy with colors, reflections etc.. but we do have a handful of colors that we use on the machines we use.. so instead of using the default appearance library, i made a new appearance library.  All this went well, but i periodically as i need them will add colors to it.. problem is that i'm obviously doing something wrong, because my colors don't always stay in there after i restart Inventor.. and yesterday, i can't seem to keep any of the colors i setup in there to stay.. all i want to do is copy specific colors from inventors appearance library.. drag them into mine, rename them, maybe tweak the color, and then they be there for next time.. why won't they stay?  

The edit pencil will come up on my library.. i've done the release edit after i'm done.. everything works in this inventor session, but if i turn inventor off and back on again.. they are gone.. only thing i have thought of remaining is that 3 users on our network share the same design styles location so we all our using same stuff, so is the file inventor uses in design styles to save to read only or something, but i read that appearances aren't saved in design styles.. How to do this and the colors stay and populate through all the existing stuff.. I have got the colors to lock into my template ipt in the doc appearances.. and i've done the save to custom library thing.. works until i restart inventor..

View 6 Replies View Related

AutoCAD Inventor :: How To Change File Naming For Profile Custom Library

Mar 3, 2012

Inventor creates a names to custom library parts based on settings and available parameters.

For all custom libraries I can create file names as I want except profile libraries.

The profile library create file name using Family Name + Stock Number and I did not find the

way to change it. I cannot get rid of that Stock Number in family name in this and other profile libraries. I wish I can use Part Number instead of Stock number in naming as more informative.

To change the file naming I do the following:

Manage - Editor - chose Library - chose family - Family Table - File Naming -

than chose required parameters to be shown as file name (for instance I have

{PARTNUMBER}), than in Map to Inventor Property: - Member.Display.Name

than OK  - Refresh - Done.

All custom libraries obeys the file name changing EXCEPT the profile library.

[URL]

View 3 Replies View Related

AutoCAD LT :: Locked Materials Library?

Oct 16, 2012

my ex-draftsmen has locked the materials library and the new draftsman is unable to use it.

View 2 Replies View Related

AutoCad 3D :: Importing Materials Into Library

Apr 18, 2013

I'm having trouble importing materials into the library. Where in the world is the import button for materials?

View 2 Replies View Related

AutoCAD Inventor :: Custom Appearance Library Colors Randomly Quit Working?

Aug 8, 2012

We are have been using Inventor to draw wooden furniture for a couple years, and have a custom appearance library with several different finishes (using photos of actual finished pieces of wood). Every now and then a part (ipt) takes a notion to not change to the color we set it to, seemingly without ryhme or reason. This mostly occurs with mirrored parts, but occasionally a standard (not mirrored part) will do this as well.

We have done all the obvious things, and some not so obvious. The path to the photos and the library is added to the project, and I opened the Appearance Browser and checked to make sure appearance knows where to find its bmp file, and it still doesn't do it to change color. And yes, I tried restarting my computer, because a couple days ago I was working with the Appearance Browser, and sometimes restarting Inventor made a difference in whether certain things worked or didn't work. This is also not limited to one computer, it acts like this on all of our computers.

We are using some png files and some bmp picture files. Would the file format maybe have something to do with it ?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved