AutoCAD Inventor :: Custom Appearance Library Colors Randomly Quit Working?
Aug 8, 2012
We are have been using Inventor to draw wooden furniture for a couple years, and have a custom appearance library with several different finishes (using photos of actual finished pieces of wood). Every now and then a part (ipt) takes a notion to not change to the color we set it to, seemingly without ryhme or reason. This mostly occurs with mirrored parts, but occasionally a standard (not mirrored part) will do this as well.
We have done all the obvious things, and some not so obvious. The path to the photos and the library is added to the project, and I opened the Appearance Browser and checked to make sure appearance knows where to find its bmp file, and it still doesn't do it to change color. And yes, I tried restarting my computer, because a couple days ago I was working with the Appearance Browser, and sometimes restarting Inventor made a difference in whether certain things worked or didn't work. This is also not limited to one computer, it acts like this on all of our computers.
We are using some png files and some bmp picture files. Would the file format maybe have something to do with it ?
View 1 Replies
ADVERTISEMENT
Jan 8, 2013
First, I have not grasped the extent yet of how the new appearance library works.. we don't get crazy with colors, reflections etc.. but we do have a handful of colors that we use on the machines we use.. so instead of using the default appearance library, i made a new appearance library. All this went well, but i periodically as i need them will add colors to it.. problem is that i'm obviously doing something wrong, because my colors don't always stay in there after i restart Inventor.. and yesterday, i can't seem to keep any of the colors i setup in there to stay.. all i want to do is copy specific colors from inventors appearance library.. drag them into mine, rename them, maybe tweak the color, and then they be there for next time.. why won't they stay?
The edit pencil will come up on my library.. i've done the release edit after i'm done.. everything works in this inventor session, but if i turn inventor off and back on again.. they are gone.. only thing i have thought of remaining is that 3 users on our network share the same design styles location so we all our using same stuff, so is the file inventor uses in design styles to save to read only or something, but i read that appearances aren't saved in design styles.. How to do this and the colors stay and populate through all the existing stuff.. I have got the colors to lock into my template ipt in the doc appearances.. and i've done the save to custom library thing.. works until i restart inventor..
View 6 Replies
View Related
Dec 7, 2012
How to set Autodesk Appearance Library as default using API
View 2 Replies
View Related
Aug 6, 2013
When I use an appearance in a document, it copies it to the document. I would like that when I modify the appearance in the library, every documents using in is uptaded
View 2 Replies
View Related
Oct 2, 2012
I was trying to add a new appearance to our libray this morning, got confused and started searching here and ran across an old thread of mine.
".... Note that you can have a single custom library that contains both physical materials as well as appearances, or keep them separate if you prefer...."
I had always thought that these were two seperate things. After I read this, I noticed in my .ipj that the Inventor Materials Library is listed under both Appearance and Materials.
I tried copying the "InventorMaterialLibrary.adsklib" but that did not work when I tried to add it under my materials library in the ipj.... It said "No Materials are available". HOW to go about creating a single library that contains both materials and appearances?
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 2.80ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1 (before it was pulled)
Vault 2013
View 7 Replies
View Related
Jun 19, 2013
When selecting a material from the dropdown list the material isn’t downloaded correctly.
I had just edited the appearance for that material, pointed it to a new bitmap, then added the appearance & material to the library. Then purged it all from the document.
Restarting Inventor results in the material being downloaded from the library correctly.
dataset
Video showing the behaviour [URL]
Factory Design Suite Premium 2014 64bit
Vault Professional 2014
Win7 Pro 64bit
View 1 Replies
View Related
Jan 10, 2014
I need to do a ray-traced rendering of a smooth black anodized surface.
However when using the "Anodized Black" appearance, I get a speckled surface when using ray trace, and the part looks like galvanized steel.
View 1 Replies
View Related
Jan 7, 2013
I have an xml file with RAL colors I used befor the new appearance was added in Inventor. Now I want to use ral colors in Inventor 2013 but that I can not manage. how I can add ral colors and also properly be given in my parts.
View 1 Replies
View Related
Nov 11, 2013
When you go to the Appearance Browser and go to our custom appearances, some of the thumbnails don't match what the appearance is actually set to. If you open up/edit the appearance it shows the correct appearance, but the thumbnail isn't displayed correctly.
View 7 Replies
View Related
Sep 13, 2005
Is it possible to add all RAL colors to the Inventor style library?
(IV10 SP1)
View 7 Replies
View Related
Dec 19, 2013
We produce a piece of equipment with numerous parts and assemblies that we would like to use as a base model. We do not or will ever use vault so I'm trying to come up with a library/content center area where I can store the parts and assemblies that then can be inserted into new assemblies which would create a completely new design based on existing parts. My problem is lack of experience in setting up a good library/ content center area, I do not know what would be an acceptable plan of attack, right now I have moved the complete assembly onto the server in its own location but this is where I get stumped.
View 1 Replies
View Related
Oct 30, 2012
Is there some reason my 2013 custom material library size is so big. I have a 16 different appearances and 35 different physical properties with a total of 71 separate materials and then file is nearly 3 megs. 99% of the appearances and physical props are Inventor standard.
The default Inventor Library with considerably more information is WAY smaller.
So what's going on, am i just building the library wrong?
I also have a different library that is over 21 megs, it contains a number of different materials that is comperable to the default Inventor one but again only 16 appearances and 35 phsical props. It's completly unusable.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 8 Replies
View Related
Jan 29, 2013
I have recently started playing with the new materials and appearances browsers - what a nightmare.
So I created a custom library as described in the "Materials and Appearances" whitepaper from Autodesk.
Bottom left corner of material browser > create new material
> edit material: change its name, density etc
Why can I not add it to the new custom library - from document materials?I tried to drag and drop - no success.
I tried to right click > add to > xxx material library - no success.It does however let me drag and drop to the "favorites".
Inventor Professional 2014.
Windows 7 64 bit.
View 8 Replies
View Related
Nov 8, 2013
I've created a folder on our server that contains commonly used parts by several users. My thought was that by referencing this folder as library in their projects, they wouldn't be able to change the parts. I could also build assemblies referencing these common parts so they wouldn't have to be copied into each project folder...
During the save option in their assemblies, the parts show up as NO (in a library), but this can be bypassed by "YES TO ALL".Is this not the right process for setting up a custom part library?Also, the users are experiencing some lag issues... Could this be the reason?
View 4 Replies
View Related
Nov 28, 2012
It happen recently when I try to launch Adobe CS6 Illustrator, the loading stop at switch library and quit unexpectedly. I did not encounter such issue previously. I tried updating Illustrator patch but it is still having such issue.
I am using a Mac Book Pro, OS X 10.7.5, here is the error message.
View 1 Replies
View Related
Jan 26, 2012
My custom library works fine when I try to insert a part from content center, but when I try to use frame generator my library is not seen. I set the "Standard Organization" and "Standard" family property fields both to "DYNA" hoping that standard would show up in the frame generator "Standard" drop down menu but it doesn't.
I saved a copy of a pipe family to "My Library" and made it an independant family.
View 1 Replies
View Related
Apr 24, 2012
Is there a good source of material mechanical properties on the internet? I have been creating a custom material library with the materials I normally use and I've just been duplicating a material from the supplied libraries to create mine with a name change only. I'd like to include the correct mechanical properties if I could find a source of information that has all the properties in the format that the Inventor 2013 materials editor requires.
View 5 Replies
View Related
May 5, 2013
I would like to publish the custom threaded rivets library. I wish I could add it to Rivets section but it is not available in the Component Authoring.
Actually I did create it in the Clevis Pin section but I would like some order in my library where everything is set on a right place. I mean I wish my rivets will be placed in Rivet section.
Possible to make Rivets available in the Component Authoring?
There are any ways to move it to other section after Publishing? Is it possible to create the custom section which will be available and visible in Component Authoring?
View 3 Replies
View Related
Feb 14, 2013
I have gone thru what appears to be the correct steps in creating a custom material library a total of 3 times.
Once I finish customizing the library while in Inventor, I add it to my project file and make it the "active" library. I test it with each of my part & assembly templates on my local machine without an issue. When I log into another work station, locate and add the new library to their project file Inventor gives me a "no materials found". So I go back to my machine to check and the library is no longer valid for me either.
I can see the library on the server, the file size is 3.6MB so it has substance. I cannot figure out what I am doing that is causing the library from locking up completely when I try to use it with another work station. Also, if any way to make my library usable again that would save me about 8 hours of work.
all of our stations use the "generic.ipj" project file.
View 4 Replies
View Related
May 4, 2012
I've made my own material library containing a short list of materials from the Inventor default library. And I have set my Project ipj to use it as the default library. All works OK. But, every time I make a new project ipj I have to go find my custom library adsklib file to add it to the project. Is there a certain folder the adsklib file need to live in so that new projects will pick it up automatically?
View 2 Replies
View Related
Feb 3, 2012
I have created a custom library (custom content center), and that went fine. All I done was copy a family of RHS from the desktop content center into my custom content library. I then created a small test assembly with frame generator to see if I could use my custom library. It worked fine BUT when I place it into a drawing and create the parts list, the parts list shows all the info in an order that is no use to me. (see attached *SNIP A*)
What I would like is that when I use frame generator along with my custom library, then take it into a drawing, the parts list needs to look like the attached file (see attached *SNIP B*).
So really, I want the "Unit QTY" to vanish, I want the "QTY" to show the Quantity of that part within the assembly, I want the "stock Number" to vanish and I want the description to show the size of the member (what the "stock number" currently shows) along with the length of the member.
Now I know I can edit all this for each part within the parts list BUT I need the parts list to show this info EVERY time AND automatically.
View 9 Replies
View Related
Dec 11, 2013
Is there a way to export to share with other a custom content center derived library? (without vault)
View 2 Replies
View Related
Feb 1, 2012
I have a bunch of custom shapes I use in the frame generator and I want to transfer them to another computer. Where are these located and how would I transfer them? I'm using Inventor 2012.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 7 Replies
View Related
Jan 16, 2013
When I implemented Inventor Pro 2013 I added all our custom materials to the Inventor Material Library. This library is not local but on a shared network drive that everyone in my company can access.You can clearly see that it is not locked and is write enabled. I dragged the local material to the library and I shows up in the library. When I close and exit Inventor and re-open, it is no longer available.
You can clearly see by my screen capture that the new material was added to the library. Why isn't is updating the library?
I have managed our Inventor styles and libraries for Inventor since 2003 (R5) and I never had as much problems getting my mind to wrap around this new appearances change that Autodesk has made. I have wasted 4 hours this morning trying to add a simple custom material to my library and I cannot.
View 3 Replies
View Related
May 28, 2013
I have upgraded to Inventor 2014 and I'm having trouble transferring my custom content center library (local machine, no server). My understanding was that I copy the .idcl and .idz files from the old folder to the 2014 folder, open the projects dialog box, configure content center libraries button, and use the update tool button.
However, in the configure libraries dialog box my custom library doesn't even show up in the list along with my ANSI, ISO, "My Library", etc. Restarting Inventor didn't work.
View 4 Replies
View Related
Jul 2, 2012
I installed Infrastructure Design Suite 2013 on my pc to try, when using 2012.
F1 doesn't work and neither does any of the buttons on the Help ribbon. I haven't uninstalled the 2013 version yet. Was hoping to not have to.
View 2 Replies
View Related
Jul 25, 2010
I typically use basic ISO fastners in conjunction with the bolted connection generator. Just now I have discovered the ability to add a custom library to the content centre. This appears fantastic as I no longer have to sift through the 10 - 30 or so items available in each category to complete my bolted connection.
However I am experiencing a delima
I have created a custom library called "My Favourites" and it contains 6 bolt families, 1 spring & flat washer family and 1 nut family. All families are derived from the ISO standard (bar the spring washer which is DIN 128) and all thread pitches for the respective nut and bolt connection(s) match.
The problem I am experiencing is when I execute the bolted connection command I can add the bolt, 2 flats and 1 spring washer yet when I come to close the connection with a nut the nut selection box is empty?
I have the active project configured with "My Favourites" "Inventor Feature" & "Inventor Routed Systems" as the only in use libraries. Secondly, I have verified the existance of the nut(s) in "My Favourites" in the Content Centre Editor.
I am using Inventor 2010 updated to SP3 on a standalone machine, running Windows 7 Ultimate (w/ latest updates)
View 2 Replies
View Related
Jan 19, 2012
I have set up a Custom CC library that contains structural shapes.In the Family Table I have a Stock No column which references the value in my DESIGNATION columnThe Stock No column is mapped to Project.Stock NumberUnder Template Parameter (in Parameter Mapping) I have mapped StockNo to Design Tracking Properties: Stock Number.
When I use Frame Generator to add a structural shape, from my library, the name shown in the Model Browser is formatted as follows (Standard)+(Unique Number) and not (Standard)+(Stock Number)+(Unique Number).
How to get the Stock Number to show in the model Browser. How to get the members name to show, with the correct format, in the Model Browser as this will make identifying members in an assembly easier.
Please see attached for Model Browser pic.
Gigabyte Q1542
Win 7 Pro 64Bit
i5 - 3230M
8 GB Ram
Intel HD Graphics
Nvidia GeForce 640M / 2GB with Optimus
View 4 Replies
View Related
Mar 3, 2012
Inventor creates a names to custom library parts based on settings and available parameters.
For all custom libraries I can create file names as I want except profile libraries.
The profile library create file name using Family Name + Stock Number and I did not find the
way to change it. I cannot get rid of that Stock Number in family name in this and other profile libraries. I wish I can use Part Number instead of Stock number in naming as more informative.
To change the file naming I do the following:
Manage - Editor - chose Library - chose family - Family Table - File Naming -
than chose required parameters to be shown as file name (for instance I have
{PARTNUMBER}), than in Map to Inventor Property: - Member.Display.Name
than OK - Refresh - Done.
All custom libraries obeys the file name changing EXCEPT the profile library.
[URL]
View 3 Replies
View Related
May 6, 2011
I just tried to do an xref and the command stops everything. I get no reaction from autocad. What is wrong?
here is an update: The Xref Palette is docked to my left side and when I hover to get it to flip out I click the DWG button in the left hand upper corner. Well nothing happens from there. Now, when I type -xref the command works at the command line. How do I get the palette to work again?
View 9 Replies
View Related
Jun 28, 2012
Because my company is setup such that it has 3 companies operating under one roof and multiple MRP systems we have components that could have different part numbers depending on which company is in posession of it. As a design Engineer I need to be able to produce production drawings for all 3 divisions and provide production personnel the appropriate part #s for the items depending on where in the process the item is.
The Eng. Dept. acts across all companies the designs are controlled in a single place. I have created Custom Content Center Libraries for the different companies for standard items like nuts, bolts, etc...
How can I choose which Custom Conent Center Library my parts come from?
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
View 3 Replies
View Related
