AutoCAD Inventor :: Custom Library Of Parts?
Nov 8, 2013
I've created a folder on our server that contains commonly used parts by several users. My thought was that by referencing this folder as library in their projects, they wouldn't be able to change the parts. I could also build assemblies referencing these common parts so they wouldn't have to be copied into each project folder...
During the save option in their assemblies, the parts show up as NO (in a library), but this can be bypassed by "YES TO ALL".Is this not the right process for setting up a custom part library?Also, the users are experiencing some lag issues... Could this be the reason?
View 4 Replies
ADVERTISEMENT
Feb 3, 2012
I have created a custom library (custom content center), and that went fine. All I done was copy a family of RHS from the desktop content center into my custom content library. I then created a small test assembly with frame generator to see if I could use my custom library. It worked fine BUT when I place it into a drawing and create the parts list, the parts list shows all the info in an order that is no use to me. (see attached *SNIP A*)
What I would like is that when I use frame generator along with my custom library, then take it into a drawing, the parts list needs to look like the attached file (see attached *SNIP B*).
So really, I want the "Unit QTY" to vanish, I want the "QTY" to show the Quantity of that part within the assembly, I want the "stock Number" to vanish and I want the description to show the size of the member (what the "stock number" currently shows) along with the length of the member.
Now I know I can edit all this for each part within the parts list BUT I need the parts list to show this info EVERY time AND automatically.
View 9 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
Feb 21, 2013
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
Jul 14, 2004
I have installed the service pack, but I am still having trouble getting my structural steel shapes to mirror correctly. The green button is not an option for these parts, only the yellow and grey. I can, however, mirror everything else properly. How do I get these parts to mirror correctly?
View 1 Replies
View Related
Jun 11, 2012
How do I get the library raw material to default the units to be “QTY, not length”? So I don’t have to open every part I bring in to an assy and update it for my BOM?
View 5 Replies
View Related
Jun 25, 2013
The BOM structure of the library parts is set up as "purchased" and I cannot change it for some reason..... is there any way to change this?
View 4 Replies
View Related
Jul 16, 2013
Since autodesk developers didn't think of the fact that somebody might want to change the material of the bolt or hollow sections when it get's saved in the library, is there any way of changing the default saving path of the content center generated parts? These parts are getting saved in the library folder at the moment so Inventor doesn't allow me to change their material.
View 5 Replies
View Related
Nov 8, 2011
I'm assembling parts and one of the parts is in my Inventor Library. When I try to make a plane visible it won't let me. I can constrain to the plane , I just can't make it visible.
Inventor 2011
Autodesk Inventor 2011
AutoCAD Mechanical 2011
View 4 Replies
View Related
Dec 19, 2013
We produce a piece of equipment with numerous parts and assemblies that we would like to use as a base model. We do not or will ever use vault so I'm trying to come up with a library/content center area where I can store the parts and assemblies that then can be inserted into new assemblies which would create a completely new design based on existing parts. My problem is lack of experience in setting up a good library/ content center area, I do not know what would be an acceptable plan of attack, right now I have moved the complete assembly onto the server in its own location but this is where I get stumped.
View 1 Replies
View Related
Oct 30, 2012
Is there some reason my 2013 custom material library size is so big. I have a 16 different appearances and 35 different physical properties with a total of 71 separate materials and then file is nearly 3 megs. 99% of the appearances and physical props are Inventor standard.
The default Inventor Library with considerably more information is WAY smaller.
So what's going on, am i just building the library wrong?
I also have a different library that is over 21 megs, it contains a number of different materials that is comperable to the default Inventor one but again only 16 appearances and 35 phsical props. It's completly unusable.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 8 Replies
View Related
Jan 29, 2013
I have recently started playing with the new materials and appearances browsers - what a nightmare.
So I created a custom library as described in the "Materials and Appearances" whitepaper from Autodesk.
Bottom left corner of material browser > create new material
> edit material: change its name, density etc
Why can I not add it to the new custom library - from document materials?I tried to drag and drop - no success.
I tried to right click > add to > xxx material library - no success.It does however let me drag and drop to the "favorites".
Inventor Professional 2014.
Windows 7 64 bit.
View 8 Replies
View Related
Jan 26, 2012
My custom library works fine when I try to insert a part from content center, but when I try to use frame generator my library is not seen. I set the "Standard Organization" and "Standard" family property fields both to "DYNA" hoping that standard would show up in the frame generator "Standard" drop down menu but it doesn't.
I saved a copy of a pipe family to "My Library" and made it an independant family.
View 1 Replies
View Related
Apr 24, 2012
Is there a good source of material mechanical properties on the internet? I have been creating a custom material library with the materials I normally use and I've just been duplicating a material from the supplied libraries to create mine with a name change only. I'd like to include the correct mechanical properties if I could find a source of information that has all the properties in the format that the Inventor 2013 materials editor requires.
View 5 Replies
View Related
May 5, 2013
I would like to publish the custom threaded rivets library. I wish I could add it to Rivets section but it is not available in the Component Authoring.
Actually I did create it in the Clevis Pin section but I would like some order in my library where everything is set on a right place. I mean I wish my rivets will be placed in Rivet section.
Possible to make Rivets available in the Component Authoring?
There are any ways to move it to other section after Publishing? Is it possible to create the custom section which will be available and visible in Component Authoring?
View 3 Replies
View Related
Feb 14, 2013
I have gone thru what appears to be the correct steps in creating a custom material library a total of 3 times.
Once I finish customizing the library while in Inventor, I add it to my project file and make it the "active" library. I test it with each of my part & assembly templates on my local machine without an issue. When I log into another work station, locate and add the new library to their project file Inventor gives me a "no materials found". So I go back to my machine to check and the library is no longer valid for me either.
I can see the library on the server, the file size is 3.6MB so it has substance. I cannot figure out what I am doing that is causing the library from locking up completely when I try to use it with another work station. Also, if any way to make my library usable again that would save me about 8 hours of work.
all of our stations use the "generic.ipj" project file.
View 4 Replies
View Related
May 4, 2012
I've made my own material library containing a short list of materials from the Inventor default library. And I have set my Project ipj to use it as the default library. All works OK. But, every time I make a new project ipj I have to go find my custom library adsklib file to add it to the project. Is there a certain folder the adsklib file need to live in so that new projects will pick it up automatically?
View 2 Replies
View Related
Feb 20, 2012
When inserting parts from CC, by default As Standard is chosen, but I always need As Custom, so I can choose where to place the files. Is it possible to make As Custom default option?
View 2 Replies
View Related
May 1, 2013
I am looking for a way to miter two pieces of rectangular hollow section.
I have placed the parts from the content center as custom parts, now I am looking for a way to perform a miter on the them where they intersect.
I am aware I can perform the miter if the sections had been created through frame generator but I was wondering if miter could be used outside the fg environment.
View 7 Replies
View Related
Dec 11, 2013
Is there a way to export to share with other a custom content center derived library? (without vault)
View 2 Replies
View Related
Feb 1, 2012
I have a bunch of custom shapes I use in the frame generator and I want to transfer them to another computer. Where are these located and how would I transfer them? I'm using Inventor 2012.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 7 Replies
View Related
Jan 16, 2013
When I implemented Inventor Pro 2013 I added all our custom materials to the Inventor Material Library. This library is not local but on a shared network drive that everyone in my company can access.You can clearly see that it is not locked and is write enabled. I dragged the local material to the library and I shows up in the library. When I close and exit Inventor and re-open, it is no longer available.
You can clearly see by my screen capture that the new material was added to the library. Why isn't is updating the library?
I have managed our Inventor styles and libraries for Inventor since 2003 (R5) and I never had as much problems getting my mind to wrap around this new appearances change that Autodesk has made. I have wasted 4 hours this morning trying to add a simple custom material to my library and I cannot.
View 3 Replies
View Related
May 28, 2013
I have upgraded to Inventor 2014 and I'm having trouble transferring my custom content center library (local machine, no server). My understanding was that I copy the .idcl and .idz files from the old folder to the 2014 folder, open the projects dialog box, configure content center libraries button, and use the update tool button.
However, in the configure libraries dialog box my custom library doesn't even show up in the list along with my ANSI, ISO, "My Library", etc. Restarting Inventor didn't work.
View 4 Replies
View Related
Aug 8, 2013
I have a lot of custom libraries for purchased items for my projects. When I bring them into my assemblies I cannot turn on or off surface planes or make any changes.
I get the message that the file is not checked out to me. How can I make it so they are always checked out to me. The libraries are mine on my system.
View 9 Replies
View Related
Jan 16, 2012
I am trying to add a custom iProperty from my assembly to the drawing parts list. According to the help wiki, I'm supposed to click Column Chooser > New Property > Custom Properties List (click here to see the relevant wiki page--also see the attached screenshot called Custom Property Help.png).
When I click on new property, there is nothing about Custom Properties List.
View 2 Replies
View Related
Apr 4, 2013
how to copy parts from the existing CC to newly created custom folders within the CC. We are now just starting to look into which parts we want to be in our custom folders moving forward.
Once we copy them over, the plan is to change the descriptions and possibly some dimension values. Because we are in the early stages of revamping our companies part number scheme the thought was to keep the out of the box P/N's currently showing in the family table of these parts. Some of these parts have already been used as "Standard" (not custom) from out of the box in the CC and these said parts have already been checked into the vault. If we are not changing the part numbers in the copied parts family table, is this going to create errors when checking these copied parts into the vault? Part of me is saying I am going to get the "This part already exists in the Vault" error message being they are standard parts But, the other part of me says technically they are different so maybe this wont be an issue. I am looking for confirmation of this.
I also would like to know if it is possible, when you have two separate custom folders in the CC can you copy the same component into both folders changing only slight things.
Inventor Suite 2012
Windows 7 Professional
Intel (R) Xeon (R) CPU 3.47 GHz
12.0 GB Memory, 64 bit OS
View 3 Replies
View Related
Nov 21, 2013
I'm having a bit of trouble creating a new parts list style. I really want to have two styles to choose from in all three of my .idw templates. I understand how to create them but I can't save them to the library.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 4 Replies
View Related
Jul 25, 2010
I typically use basic ISO fastners in conjunction with the bolted connection generator. Just now I have discovered the ability to add a custom library to the content centre. This appears fantastic as I no longer have to sift through the 10 - 30 or so items available in each category to complete my bolted connection.
However I am experiencing a delima
I have created a custom library called "My Favourites" and it contains 6 bolt families, 1 spring & flat washer family and 1 nut family. All families are derived from the ISO standard (bar the spring washer which is DIN 128) and all thread pitches for the respective nut and bolt connection(s) match.
The problem I am experiencing is when I execute the bolted connection command I can add the bolt, 2 flats and 1 spring washer yet when I come to close the connection with a nut the nut selection box is empty?
I have the active project configured with "My Favourites" "Inventor Feature" & "Inventor Routed Systems" as the only in use libraries. Secondly, I have verified the existance of the nut(s) in "My Favourites" in the Content Centre Editor.
I am using Inventor 2010 updated to SP3 on a standalone machine, running Windows 7 Ultimate (w/ latest updates)
View 2 Replies
View Related
Jan 19, 2012
I have set up a Custom CC library that contains structural shapes.In the Family Table I have a Stock No column which references the value in my DESIGNATION columnThe Stock No column is mapped to Project.Stock NumberUnder Template Parameter (in Parameter Mapping) I have mapped StockNo to Design Tracking Properties: Stock Number.
When I use Frame Generator to add a structural shape, from my library, the name shown in the Model Browser is formatted as follows (Standard)+(Unique Number) and not (Standard)+(Stock Number)+(Unique Number).
How to get the Stock Number to show in the model Browser. How to get the members name to show, with the correct format, in the Model Browser as this will make identifying members in an assembly easier.
Please see attached for Model Browser pic.
Gigabyte Q1542
Win 7 Pro 64Bit
i5 - 3230M
8 GB Ram
Intel HD Graphics
Nvidia GeForce 640M / 2GB with Optimus
View 4 Replies
View Related
Jan 8, 2013
First, I have not grasped the extent yet of how the new appearance library works.. we don't get crazy with colors, reflections etc.. but we do have a handful of colors that we use on the machines we use.. so instead of using the default appearance library, i made a new appearance library. All this went well, but i periodically as i need them will add colors to it.. problem is that i'm obviously doing something wrong, because my colors don't always stay in there after i restart Inventor.. and yesterday, i can't seem to keep any of the colors i setup in there to stay.. all i want to do is copy specific colors from inventors appearance library.. drag them into mine, rename them, maybe tweak the color, and then they be there for next time.. why won't they stay?
The edit pencil will come up on my library.. i've done the release edit after i'm done.. everything works in this inventor session, but if i turn inventor off and back on again.. they are gone.. only thing i have thought of remaining is that 3 users on our network share the same design styles location so we all our using same stuff, so is the file inventor uses in design styles to save to read only or something, but i read that appearances aren't saved in design styles.. How to do this and the colors stay and populate through all the existing stuff.. I have got the colors to lock into my template ipt in the doc appearances.. and i've done the save to custom library thing.. works until i restart inventor..
View 6 Replies
View Related
