I have installed the service pack, but I am still having trouble getting my structural steel shapes to mirror correctly. The green button is not an option for these parts, only the yellow and grey. I can, however, mirror everything else properly. How do I get these parts to mirror correctly?
View 1 RepliesI got a simple question about the creation of copies of an object. Is it possible to have the objects in the mirroring of an object change with the object used as reference for mirroring?
If there is no function to do this directly is there a way to do it via Ilogics to update the mirrored objects? If possible even by deleting and creating a new the mirroring yet not manually but by i logic?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
I've created a folder on our server that contains commonly used parts by several users. My thought was that by referencing this folder as library in their projects, they wouldn't be able to change the parts. I could also build assemblies referencing these common parts so they wouldn't have to be copied into each project folder...
During the save option in their assemblies, the parts show up as NO (in a library), but this can be bypassed by "YES TO ALL".Is this not the right process for setting up a custom part library?Also, the users are experiencing some lag issues... Could this be the reason?
How do I get the library raw material to default the units to be “QTY, not length”? So I don’t have to open every part I bring in to an assy and update it for my BOM?
View 5 Replies View RelatedThe BOM structure of the library parts is set up as "purchased" and I cannot change it for some reason..... is there any way to change this?
View 4 Replies View RelatedI have created a custom library (custom content center), and that went fine. All I done was copy a family of RHS from the desktop content center into my custom content library. I then created a small test assembly with frame generator to see if I could use my custom library. It worked fine BUT when I place it into a drawing and create the parts list, the parts list shows all the info in an order that is no use to me. (see attached *SNIP A*)
What I would like is that when I use frame generator along with my custom library, then take it into a drawing, the parts list needs to look like the attached file (see attached *SNIP B*).
So really, I want the "Unit QTY" to vanish, I want the "QTY" to show the Quantity of that part within the assembly, I want the "stock Number" to vanish and I want the description to show the size of the member (what the "stock number" currently shows) along with the length of the member.
Now I know I can edit all this for each part within the parts list BUT I need the parts list to show this info EVERY time AND automatically.
Since autodesk developers didn't think of the fact that somebody might want to change the material of the bolt or hollow sections when it get's saved in the library, is there any way of changing the default saving path of the content center generated parts? These parts are getting saved in the library folder at the moment so Inventor doesn't allow me to change their material.
View 5 Replies View RelatedI'm assembling parts and one of the parts is in my Inventor Library. When I try to make a plane visible it won't let me. I can constrain to the plane , I just can't make it visible.
Inventor 2011
Autodesk Inventor 2011
AutoCAD Mechanical 2011
I am currently looking into mirroring and arrays and i wondered if it is possible to have some kind of adaptive mirroring activated or used.
The aim is as i change the instance which is arrayed or mirrored i want the objects in the array and the mirrored parts changed too.
If it is´not possible just like that i would want to do a macro or i logic form that updates the array or mirror to have matching parts again.
I have a fixture that will have a symmetrically opposite fixture. Is there a way to copy/mirror the fixture in vault that would include the drawings?The new fixture would also be in a new project.
I was thinking I would copy the entire design in vault to a new project. I could then open it up and mirror the entire assembly. Would that work?
I have a problem with a model and the drawing. In the model i have mirrored some holes. In the drawing the hole-table shows some of the mirrored holes on the position of the original ones. Also some entries are doubled.
I have also tried to redo a fresh drawing, the problem persists.
System: Inventor 2011 64 bit Subscription bonus pack with sp2
I also tried o another system without change. The model is too big to attach, so i attached only a pdf-dok.
I am atempting to mirror a large assembly, and noticed that not all of my contraints were retain, is there a way to make to mirror and retain all of the contraints?
View 2 Replies View RelatedI have a sheet metal part. It is a machine door with four edge flanges. I have mirrored this part. The origin part has flat pattern while the mirrored creates the folded pattern.
It still folded even when origin is in flat pattern.
Coming from a background of ProE, Usually a mirrored group of constrained parts would mirror with alternative constraints locking them in place. Is there a way to do this in Inventor?
Every time I mirror constrained parts through a Datum plane, the results are loose components that could be dragged anywhere. I might aswell have just placed them again, though it gives me a good idea of where they should be.
Without grounding them, is there someway of locking these compents in the mirrored position.
Also, bolted connections pick up on patterned holes and populate them, yet there is only one constraint to the original hole and the rest can rotate around it.
We are in the process of setting a naming convention for all the various parts we use, and having changed the Inventor library already, the Autocad stations (ver 2011 mechanical) are next. While I won't be the one doing this work, I want to get a jump on it as it's impeding my current work. The problem is, I don't even know where to start looking. We would be starting with the fastener library, changing the standard descriptions to suit our new convention.
View 0 Replies View RelatedI was wondering if there exists a library for pipe network parts for items such as a standard type 1 catch basin that I can add to the existing autocad pipe network parts library. Basically I'm trying to find a shortcut so that I don't have to build all of the catch basins that I need.
View 3 Replies View RelatedI am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View RelatedHow to keep text from mirroring? I know about the MIRRTEXT command and set it to "0", but my text still mirrors. It's not just one bit of text, if I mirror my entire drawing, every piece of text in it does, too. A co-worker a year ago had figured out how to keep some certain objects with text in them (shelving/tables - we do foodservice layouts) from mirroring, but it has been so long, she forgot the program.
View 5 Replies View RelatedI am attempting to mirror an object, using an endpoint but 6.5 units to the right of it. However, i don't seem able to do it, as when i mirror the objects they just end up touching.
I know the 2012 version doesn't have dialog boxes for features such as hatching and the array commands, it is possible to set it up on this version so these options become available.
The arcs in the object i have drawn gets converted to lines when i mirror the object.
View 3 Replies View RelatedIs there a command out there that allows you to mirror objects from an apparent midpoint from like an otrack without physically drawing a line then having to erase it later? I thought there was a way to do it, but my memory is failing me.
View 1 Replies View RelatedI am trying to mirror a block which has text defined internally. However, the text will not reverse when the block is mirrored. I have read some documentation which said to use MIRRTEXT with a setting of "1".
I tried this and it didn't work, are there any other options which allows the block to stay intact and not have to explode it?