AutoCAD Inventor :: Publishing Custom Library Of Rivets
May 5, 2013
I would like to publish the custom threaded rivets library. I wish I could add it to Rivets section but it is not available in the Component Authoring.
Actually I did create it in the Clevis Pin section but I would like some order in my library where everything is set on a right place. I mean I wish my rivets will be placed in Rivet section.
Possible to make Rivets available in the Component Authoring?
There are any ways to move it to other section after Publishing? Is it possible to create the custom section which will be available and visible in Component Authoring?
View 3 Replies
ADVERTISEMENT
Sep 28, 2013
I'm using Inventor 2014 with Service Pack 1 with Desktop Content Center enabled on a single machine. I've also installed Vault Basic 2014 on the same machine. Operating System is Windows 7 Professional.
I've edited my non-vaulted and vaulted project files to create a Custom Content Center Library called Zzyzx. I've started a new Assembly and entered the Content Center Editor to add files to the Zzyzx library. I've copied the Inventor ANSI fasteners section into the Zzyzx library, using the Copy To method with links enabled. So far, so good.
After copying the entire Inventor ANSI fasteners to the Zzyzx library, I created a new column called DESCRIPTION within the Heavy Hex Head Bolt - Inch series folder. Using and expression, I've modified the string values of the just created DESCRIPTION column. I've elected to map DESCRIPTION to the Project.Description iProperty. I use the OK button and each row in the new column gets populated. Update Lightning Bolts are displayed at the far left of the dialog box.
I then use either the Apply or OK button and then Inventor displays a Publish Error message box that states: Non-unique filename(s) found in members. I've checked the file names and I see nothing that's repeating. I've tried using a new file name, but that doesn't solve the issue.What steps must I take in order to successfully edit my Custom Content Library called Zzyzx?
Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate
Product Design Suite Ultimate 2012, 2013 & 2014...Other than THAT, Mrs. Lincoln, how was the play? Where we send more Govenors to prison, than on to retirement!
View 1 Replies
View Related
Sep 12, 2013
I'm making a customized content center library for my company and I'm trying to add a special type of nut but I'm not having any luck. I finally figured out how to author a part and have it show up in the bolted connection tool. Now I'm just getting an error as soon as I select my custom nut.
The error is "Cannot initialize part data table. Please verify the table definition in Content Center editor."
I've attached my part. It's a simple nut for use in aluminum extrusion, the only thing that changes between sizes is the threaded hole.
View 7 Replies
View Related
Aug 21, 2012
I am trying to create/publish custom shapes into Content Centre and for use in Frame Generator. I can create the i-Part and configure the parameters I want to enable different sizes - no problem. However when I go to "Publish Part" ()
I get the following error.......
do I need to save the ipt file in a different location? What dependencies are there? I get the same result if I follow the Inventor tutorial using the brace.ipt part....
View 2 Replies
View Related
May 11, 2013
I have an assignment in school in which we are going to calculate the number of needed rivets and their dimensions to join two pieces of aluminum with the dimensions 5x50x200mm together.
I've created the sheet metal and imported two of them into an assembly along with 8 rivets from the content center with the appropiete dimensions. In comes my problem. I planned on running a stress analysis and pasting the pictures of the results in my report. However, I have a feeling that the stress analysis tool isn't working as it should.
No matter what force I'm applying to the sheet metals, and no matter what material I assign to the different parts, including the rivets, the results, the deformation and force applied to the rivets, are roughly the same.
I've applied a force of 12700N to the two short sides of the sheet metals:
The two sheet metals are also fixed on the opposite side of the forces:
[URL]
View 1 Replies
View Related
Dec 19, 2013
We produce a piece of equipment with numerous parts and assemblies that we would like to use as a base model. We do not or will ever use vault so I'm trying to come up with a library/content center area where I can store the parts and assemblies that then can be inserted into new assemblies which would create a completely new design based on existing parts. My problem is lack of experience in setting up a good library/ content center area, I do not know what would be an acceptable plan of attack, right now I have moved the complete assembly onto the server in its own location but this is where I get stumped.
View 1 Replies
View Related
Oct 30, 2012
Is there some reason my 2013 custom material library size is so big. I have a 16 different appearances and 35 different physical properties with a total of 71 separate materials and then file is nearly 3 megs. 99% of the appearances and physical props are Inventor standard.
The default Inventor Library with considerably more information is WAY smaller.
So what's going on, am i just building the library wrong?
I also have a different library that is over 21 megs, it contains a number of different materials that is comperable to the default Inventor one but again only 16 appearances and 35 phsical props. It's completly unusable.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 8 Replies
View Related
Jan 29, 2013
I have recently started playing with the new materials and appearances browsers - what a nightmare.
So I created a custom library as described in the "Materials and Appearances" whitepaper from Autodesk.
Bottom left corner of material browser > create new material
> edit material: change its name, density etc
Why can I not add it to the new custom library - from document materials?I tried to drag and drop - no success.
I tried to right click > add to > xxx material library - no success.It does however let me drag and drop to the "favorites".
Inventor Professional 2014.
Windows 7 64 bit.
View 8 Replies
View Related
Nov 8, 2013
I've created a folder on our server that contains commonly used parts by several users. My thought was that by referencing this folder as library in their projects, they wouldn't be able to change the parts. I could also build assemblies referencing these common parts so they wouldn't have to be copied into each project folder...
During the save option in their assemblies, the parts show up as NO (in a library), but this can be bypassed by "YES TO ALL".Is this not the right process for setting up a custom part library?Also, the users are experiencing some lag issues... Could this be the reason?
View 4 Replies
View Related
Jan 26, 2012
My custom library works fine when I try to insert a part from content center, but when I try to use frame generator my library is not seen. I set the "Standard Organization" and "Standard" family property fields both to "DYNA" hoping that standard would show up in the frame generator "Standard" drop down menu but it doesn't.
I saved a copy of a pipe family to "My Library" and made it an independant family.
View 1 Replies
View Related
Apr 24, 2012
Is there a good source of material mechanical properties on the internet? I have been creating a custom material library with the materials I normally use and I've just been duplicating a material from the supplied libraries to create mine with a name change only. I'd like to include the correct mechanical properties if I could find a source of information that has all the properties in the format that the Inventor 2013 materials editor requires.
View 5 Replies
View Related
Feb 14, 2013
I have gone thru what appears to be the correct steps in creating a custom material library a total of 3 times.
Once I finish customizing the library while in Inventor, I add it to my project file and make it the "active" library. I test it with each of my part & assembly templates on my local machine without an issue. When I log into another work station, locate and add the new library to their project file Inventor gives me a "no materials found". So I go back to my machine to check and the library is no longer valid for me either.
I can see the library on the server, the file size is 3.6MB so it has substance. I cannot figure out what I am doing that is causing the library from locking up completely when I try to use it with another work station. Also, if any way to make my library usable again that would save me about 8 hours of work.
all of our stations use the "generic.ipj" project file.
View 4 Replies
View Related
May 4, 2012
I've made my own material library containing a short list of materials from the Inventor default library. And I have set my Project ipj to use it as the default library. All works OK. But, every time I make a new project ipj I have to go find my custom library adsklib file to add it to the project. Is there a certain folder the adsklib file need to live in so that new projects will pick it up automatically?
View 2 Replies
View Related
Feb 3, 2012
I have created a custom library (custom content center), and that went fine. All I done was copy a family of RHS from the desktop content center into my custom content library. I then created a small test assembly with frame generator to see if I could use my custom library. It worked fine BUT when I place it into a drawing and create the parts list, the parts list shows all the info in an order that is no use to me. (see attached *SNIP A*)
What I would like is that when I use frame generator along with my custom library, then take it into a drawing, the parts list needs to look like the attached file (see attached *SNIP B*).
So really, I want the "Unit QTY" to vanish, I want the "QTY" to show the Quantity of that part within the assembly, I want the "stock Number" to vanish and I want the description to show the size of the member (what the "stock number" currently shows) along with the length of the member.
Now I know I can edit all this for each part within the parts list BUT I need the parts list to show this info EVERY time AND automatically.
View 9 Replies
View Related
Dec 11, 2013
Is there a way to export to share with other a custom content center derived library? (without vault)
View 2 Replies
View Related
Feb 1, 2012
I have a bunch of custom shapes I use in the frame generator and I want to transfer them to another computer. Where are these located and how would I transfer them? I'm using Inventor 2012.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 7 Replies
View Related
Jan 16, 2013
When I implemented Inventor Pro 2013 I added all our custom materials to the Inventor Material Library. This library is not local but on a shared network drive that everyone in my company can access.You can clearly see that it is not locked and is write enabled. I dragged the local material to the library and I shows up in the library. When I close and exit Inventor and re-open, it is no longer available.
You can clearly see by my screen capture that the new material was added to the library. Why isn't is updating the library?
I have managed our Inventor styles and libraries for Inventor since 2003 (R5) and I never had as much problems getting my mind to wrap around this new appearances change that Autodesk has made. I have wasted 4 hours this morning trying to add a simple custom material to my library and I cannot.
View 3 Replies
View Related
May 28, 2013
I have upgraded to Inventor 2014 and I'm having trouble transferring my custom content center library (local machine, no server). My understanding was that I copy the .idcl and .idz files from the old folder to the 2014 folder, open the projects dialog box, configure content center libraries button, and use the update tool button.
However, in the configure libraries dialog box my custom library doesn't even show up in the list along with my ANSI, ISO, "My Library", etc. Restarting Inventor didn't work.
View 4 Replies
View Related
Jul 25, 2010
I typically use basic ISO fastners in conjunction with the bolted connection generator. Just now I have discovered the ability to add a custom library to the content centre. This appears fantastic as I no longer have to sift through the 10 - 30 or so items available in each category to complete my bolted connection.
However I am experiencing a delima
I have created a custom library called "My Favourites" and it contains 6 bolt families, 1 spring & flat washer family and 1 nut family. All families are derived from the ISO standard (bar the spring washer which is DIN 128) and all thread pitches for the respective nut and bolt connection(s) match.
The problem I am experiencing is when I execute the bolted connection command I can add the bolt, 2 flats and 1 spring washer yet when I come to close the connection with a nut the nut selection box is empty?
I have the active project configured with "My Favourites" "Inventor Feature" & "Inventor Routed Systems" as the only in use libraries. Secondly, I have verified the existance of the nut(s) in "My Favourites" in the Content Centre Editor.
I am using Inventor 2010 updated to SP3 on a standalone machine, running Windows 7 Ultimate (w/ latest updates)
View 2 Replies
View Related
Jan 19, 2012
I have set up a Custom CC library that contains structural shapes.In the Family Table I have a Stock No column which references the value in my DESIGNATION columnThe Stock No column is mapped to Project.Stock NumberUnder Template Parameter (in Parameter Mapping) I have mapped StockNo to Design Tracking Properties: Stock Number.
When I use Frame Generator to add a structural shape, from my library, the name shown in the Model Browser is formatted as follows (Standard)+(Unique Number) and not (Standard)+(Stock Number)+(Unique Number).
How to get the Stock Number to show in the model Browser. How to get the members name to show, with the correct format, in the Model Browser as this will make identifying members in an assembly easier.
Please see attached for Model Browser pic.
Gigabyte Q1542
Win 7 Pro 64Bit
i5 - 3230M
8 GB Ram
Intel HD Graphics
Nvidia GeForce 640M / 2GB with Optimus
View 4 Replies
View Related
Jan 8, 2013
First, I have not grasped the extent yet of how the new appearance library works.. we don't get crazy with colors, reflections etc.. but we do have a handful of colors that we use on the machines we use.. so instead of using the default appearance library, i made a new appearance library. All this went well, but i periodically as i need them will add colors to it.. problem is that i'm obviously doing something wrong, because my colors don't always stay in there after i restart Inventor.. and yesterday, i can't seem to keep any of the colors i setup in there to stay.. all i want to do is copy specific colors from inventors appearance library.. drag them into mine, rename them, maybe tweak the color, and then they be there for next time.. why won't they stay?
The edit pencil will come up on my library.. i've done the release edit after i'm done.. everything works in this inventor session, but if i turn inventor off and back on again.. they are gone.. only thing i have thought of remaining is that 3 users on our network share the same design styles location so we all our using same stuff, so is the file inventor uses in design styles to save to read only or something, but i read that appearances aren't saved in design styles.. How to do this and the colors stay and populate through all the existing stuff.. I have got the colors to lock into my template ipt in the doc appearances.. and i've done the save to custom library thing.. works until i restart inventor..
View 6 Replies
View Related
Mar 3, 2012
Inventor creates a names to custom library parts based on settings and available parameters.
For all custom libraries I can create file names as I want except profile libraries.
The profile library create file name using Family Name + Stock Number and I did not find the
way to change it. I cannot get rid of that Stock Number in family name in this and other profile libraries. I wish I can use Part Number instead of Stock number in naming as more informative.
To change the file naming I do the following:
Manage - Editor - chose Library - chose family - Family Table - File Naming -
than chose required parameters to be shown as file name (for instance I have
{PARTNUMBER}), than in Map to Inventor Property: - Member.Display.Name
than OK - Refresh - Done.
All custom libraries obeys the file name changing EXCEPT the profile library.
[URL]
View 3 Replies
View Related
Aug 8, 2012
We are have been using Inventor to draw wooden furniture for a couple years, and have a custom appearance library with several different finishes (using photos of actual finished pieces of wood). Every now and then a part (ipt) takes a notion to not change to the color we set it to, seemingly without ryhme or reason. This mostly occurs with mirrored parts, but occasionally a standard (not mirrored part) will do this as well.
We have done all the obvious things, and some not so obvious. The path to the photos and the library is added to the project, and I opened the Appearance Browser and checked to make sure appearance knows where to find its bmp file, and it still doesn't do it to change color. And yes, I tried restarting my computer, because a couple days ago I was working with the Appearance Browser, and sometimes restarting Inventor made a difference in whether certain things worked or didn't work. This is also not limited to one computer, it acts like this on all of our computers.
We are using some png files and some bmp picture files. Would the file format maybe have something to do with it ?
View 1 Replies
View Related
Jun 28, 2012
Because my company is setup such that it has 3 companies operating under one roof and multiple MRP systems we have components that could have different part numbers depending on which company is in posession of it. As a design Engineer I need to be able to produce production drawings for all 3 divisions and provide production personnel the appropriate part #s for the items depending on where in the process the item is.
The Eng. Dept. acts across all companies the designs are controlled in a single place. I have created Custom Content Center Libraries for the different companies for standard items like nuts, bolts, etc...
How can I choose which Custom Conent Center Library my parts come from?
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
View 3 Replies
View Related
Nov 17, 2011
I would like the size of bearing to be included in addition to existing data to the File name, Part number and Browser name like for example the DIN 625 T1 does. I have copied the DIN 625 bearings to the custom library. I have added required info to File Name building and to the Part Number building in the custom library and now my Filename and Part Number are as I like to.
But I cannot find how to force the Browser name to be equal to Part number or File Name? [URL]
View 2 Replies
View Related
Nov 20, 2011
I have created the Custom library of ISO bolts by adding the Material to existing ISO library using the Material Guide.
The goal is to make bolts black and anodized to be more specific with purchase orders from very beginning.
After the adding the material everything is working good except the auto drop. There is a wide Table pop ups with a lot of unnecessary info.
Is it possible to choose the columns to represent there? I mean leave just Material or Part Number ?
[URL] ........
View 2 Replies
View Related
Mar 19, 2014
How can I sync all the publishing services in one library to my others librarys?
I don't want to set up all publishing services to all my librarys...
I use LR 5 and OS X.
View 4 Replies
View Related
Apr 18, 2012
Is there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
View 8 Replies
View Related
Jul 26, 2013
I have a png file of the painted aircraft with rivets shown. I want to add registration numbers ( solid color fonts) BUT I want to see the rivets underneath.
When I just use standard Text tool over the background with the rivets, they disappear.
View 2 Replies
View Related
Jul 24, 2013
I just created an empty Fastenal Library, and it is set to Read/Write. We order most of our fasteners from them, but not much else, so I used "Copy Category Structure To" Fastenal. I created a plain washer to add to the library, but when I try to publish it, I can't get it to work.
When I "Publish Part," I select Fastenal and English, then am asked to select a category to publish to. The Washers folder is greyed out, along with most other folders, but the Ball sub folder is not. I can't select Plain, which is what I need, but I can select Ball.
Also, is there a way to delete sub folders? I right click on Pins or Rivets, and the option to Delete Category is greyed out.
View 1 Replies
View Related
Jun 18, 2013
Is it possible to publish an assembly to the content center?
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
View 9 Replies
View Related
