I have a png file of the painted aircraft with rivets shown. I want to add registration numbers ( solid color fonts) BUT I want to see the rivets underneath.
When I just use standard Text tool over the background with the rivets, they disappear.
How do you add a "pattern" to a frame around a picture. The reason I ask, is when you go to make a frame around something, it asks you what "color" you desire. I don't want a "color", I want a "pattern" (the birch wood pattern).
View 6 Replies View RelatedHow to achieve the same whitish glow on the inside of the lettering on the attached image below?
Attached File(s) g.png (13.95K)
I would like to publish the custom threaded rivets library. I wish I could add it to Rivets section but it is not available in the Component Authoring.
Actually I did create it in the Clevis Pin section but I would like some order in my library where everything is set on a right place. I mean I wish my rivets will be placed in Rivet section.
Possible to make Rivets available in the Component Authoring?
There are any ways to move it to other section after Publishing? Is it possible to create the custom section which will be available and visible in Component Authoring?
I have an assignment in school in which we are going to calculate the number of needed rivets and their dimensions to join two pieces of aluminum with the dimensions 5x50x200mm together.
I've created the sheet metal and imported two of them into an assembly along with 8 rivets from the content center with the appropiete dimensions. In comes my problem. I planned on running a stress analysis and pasting the pictures of the results in my report. However, I have a feeling that the stress analysis tool isn't working as it should.
No matter what force I'm applying to the sheet metals, and no matter what material I assign to the different parts, including the rivets, the results, the deformation and force applied to the rivets, are roughly the same.
I've applied a force of 12700N to the two short sides of the sheet metals:
The two sheet metals are also fixed on the opposite side of the forces:
[URL]
I'm trying out AutoCad to see how easy it is to work with (previously I have used infinidi but it can't do what I want) to try and evaluate whether it's worth buying
what I'm after is to take a design I've made in Illustrator:
Screen shot 2011-07-11 at 12.52.52.png
and turn it into a cylinder:
Screen shot 2011-07-11 at 12.52.56.png
But instead of applying the pattern as a surface, have it with depth.
When adding a grain pattern effect to an object in Illustrator CS6 I get an odd bevel that surrounds the object. There is nothing in the Appearance window to suggest that there should be a bevel and I didn't add it myself.
Is there some setting I am missing or an easy way to remove the effect? For now I am masking the object with a slightly smaller object but it's starting to drastically increase the size of my file.
How can I just maintain lettering so that I can put it into Premiere Pro without the background showing just the lettering?
View 3 Replies View Relatedhow or where I can get name graphics because at the moment the text is ruining my signatures and things because they look tacky
View 1 Replies View RelatedI'm doing a label for a new series of battery packs for VamPowerPro.com and their new batteries are going to be called the Platinum series so I want to do the word "platinum" in some type of metallic shiney lettering.
View 5 Replies View RelatedI want to add to this poster with some text of my own. How I can add this effect of wrinkled/worn lettering to the text I add?
View 4 Replies View RelatedI've got a client who is asking for something I can't figure out how to do. She wants me to create lettering for her logo where the lettering is made of stripes. Not like masking, but imagine that toothpaste aquafresh where you squeeze it out and it's striped. So for example, we need to do an S in a circle and she wants the S to look like it's made of stripes, as if you squeezed toothpaste out of a toothpaste tube which was striped in the shape of a letter S.
Any ideas?
My problem is we need to have the lettering on the concave side of the sign. How would I make the flat lettering I have in the elevation shot follow the curve of the sign in the plan view?
I usually do most of my autocad drawing in 2d, I've done a few things in 3d but I'm not that experienced. I say that because I was thinking maybe I could make a 3d model of the flat elevation shot and bend it into radius I need.
I'm making a drawing in Inventor and I have several views and details and sections. Throughout making the drawing, I've created and deleted views. Whenever I do this, say the first view I placed was 'L', and then I delete view 'L', and make a new view. Inventor automatically labels this view 'M' instead of 'L', even though I don't have an 'L' view. This has caused me to have big gaps in the lettering of my views. Is there a way to "reset" the lettering so Inventor goes back through and re-letters everything starting from 'A'?
View 3 Replies View Relatedin paper space the blue lettering in the wc area shows up, but in paper space they do not, there is no layers turned off or funny colours problems as far as I can see.
I tried putting the blue lettering on to the remtex layer that shows up in paper space and still its the same ?
Remember Chartpak or Zip-A-Tone shading film? I REALLY miss it. Not too sure Photoshop 6.0 fills the bill for what I want to achieve but that's the look I want to add to my existing images. I want to do it similar to "bucket-filling" an existing open area. That's about all I want to do. But there are so many steps needed in order to achieve such a basic look. My question regards how to actually achieve or what steps I need to take in order to add that dotted pattern to my existing images (line art)...
All of the previous tutorials are so complicated, involving so many steps. Are there any actual steps or lessons I can see to try this? Look at the strip For Better Or For Worse...that strip has the best dotted effects...how to achieve that look in PS6?
I am trying to figure out how to create carved out lettering like in the bottom portion of this message, the "to view..." text.
[URL]
Can this be achieved in CorelDraw? I just bought X6.
how do I make Font Lettering form in a circle?
View 5 Replies View RelatedI am trying to hide some lettering on a wall in a psd version of a photo. In spite of hours looking at some semi related tutorials on layers and masking and referring to "Photoshop for dummies" I cannot make it work in practice.
View 6 Replies View RelatedI dont know how I should export a pattern. I did it before, followed some steps from a youtube video and everything went fine. Now I am trying to export a pattern again but its not working
If I export the pattern: somePattern.pat on my desktop. It doesnt appear in the list of patterns(Bucket FIll > Pattern FIll)
If I try to export it(save it) in C:/programfiles/gimp2
It tells me that I don't have the permission to do so. I also tried: C:/programfiles/gimp2/share/gimp/2.0/patterns. Still when I try to save it is telling me that I don't have the permission to save there.
Why my Ioline cutter keeps leaving these little 'tags' on my lettering? It almost as if it doesn't finish the cut through or something. Can it be fixed? Its not because the blade needs changing, because it does this even after Ive just changed the blade.
View 9 Replies View RelatedI have 2 jpeg images one of a scanned pattern, one of a hand drawing black only. See attachments.
I would like to fill the inside of the black line. Basically an elipse with the pattern that has been scanned in.
I want to know how I can put a pattern on an image. It needs to be an image with a transparent background. For example, this image (that I found on Google):
(this is a huge picture, I am just using it as an example).
Its a PNG image. Its a star template, filled with a pattern of stars....how can I do this using Gimp? I want to make different stars like this one..some with cheetah pattern, some with zebra pattern etc.
I know it has to do with the layers or something
Also, does Gimp come with templates I can use? Like a star, for instance?
I downloaded re synthesizer, but I am lost on how to make a repeatable pattern... some website said re synthesizer is used for removing watermarks, I cannot find anything relating to making a repeatable pattern.
View 1 Replies View Relatedwhere I can get a sunset sky gimp fill pattern?
View 2 Replies View RelatedI'm trying to remove a fill pattern I added to an image but I've since saved and closed the original so I can't simply undo it. I'll attach a copy of the image but in short it is a simple polygonal map of the world, I filled the continents in with a simple checkered pattern and would like to remove it so they are all blank.
View 2 Replies View RelatedI have a 512x512 pattern I need to fill a 2560x2560 area that should go 5x5...
Do I have to paste it manually, or is there a way to get the pattern fill to actually tile properly? It's not.
Using V2.8.2
I downloaded the plugin for "photoshop pattern loader". I tried to open a pattern I downloaded, and received the error "gimp pattern plugin could not open image". I put the plugin under "program files/gimp/share/gimp/2.0/script" and also tried, under "c:/users/gimp 2.8/ plugin" folder.I don't know if I am trying to put the plugin in the right folder to work? I am running windows 7, 64bit.
View 2 Replies View RelatedJust getting started with Gimp and would like to know where to find a background pattern for wheat seeds and wheat sheaves.
View 1 Replies View RelatedI'm trying to put a pattern around an object that needs alpha channel in the middle, but when I make a new layer and add the pattern, then select the area and use "Color to Alpha" it doesn't work. The pattern in that area is only turn slightly darker, not alpha channel.
View 1 Replies View RelatedMy husband and I get floor plan layouts emailed to us for work. I am able to import them and everything looks fine. I add all my text and everything looks great on my computer screen.
When I export it in a PDF file and open it up all the text is super small and sometimes not in the same place I typed it. When we print them out they need to be 36x24 so the writing needs to be somewhat big and in the right place. I am sure it is just user error!