My problem is we need to have the lettering on the concave side of the sign. How would I make the flat lettering I have in the elevation shot follow the curve of the sign in the plan view?
I usually do most of my autocad drawing in 2d, I've done a few things in 3d but I'm not that experienced. I say that because I was thinking maybe I could make a 3d model of the flat elevation shot and bend it into radius I need.
I have been away from Autocad for around 6 years but just got back into it this week and now have the 2010 version.I like the "arctext" command, but it will only let me do text on convex curves and I need it to do text on concave curves for a sign I want to make..What can I do?
View 2 Replies View Relatedthis white sign is a layer, how can I make this sign glow like it is an electric sign on at night???
also how can I make the night more realistic??? this was a daytime photo with the brightnesss and levels played around with...
WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies View RelatedI've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies View RelatedI have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies View RelatedI am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies View RelatedAbout 40% of the time, the REVCLOUD command will finish the cloud as concave. It will start correctly and be correct the entire time I am surrounding an area on my drawing and then when the last arc joins the starting point the entire cloud become inverted. Why? Is there something I can do to make it not do this? I don't seem to have any control over how it finishes. When it completes backwards, I fix it using PEDIT > Decurve then I convert the Polyline into a cloud and it appears correctly. Is there a better way?
View 9 Replies View RelatedHow do I create a concave fillet in AC2012?
Usually, when I try to fillet one edge it creates a convex fillet. and if I want it to be concave instead?
I want to draw the door in plan but the arc is coming in other direction. Here is sample drawing.
View 3 Replies View RelatedI am working on a project and figuring out a way to fill a concave space I have with a seperate solid that takes up the exact amount of space. I would like for this new solid to be its own part. I will post a picture so you can understand what I am reffering to. As you can see, there is a concave space in the middle of the design; what I am looking to do is fill this area with a type of foam, so I need to model something that fills all the spaces up to the top plane.
I have tried using the thicken/offset tool but it gives me errors on vertexs and such and I have tried many different selection variants. I did get the space to fill in but then ran into the problem of it being all one solid, not something I could take out and make a different part, which is what I am looking to do.
i have the bottom half but then it has to has curved surfaces going up
View 9 Replies View RelatedI need to make a rack for a machine I am designing. We use a variation of this now but I need to change the rack we have always used. The rack is on a radius and the teeth are on the inside of said radius. I plan on using the same tooth profile that we are currently using but i was wondering if there was an easy way to pattern this.
View 9 Replies View RelatedI'm making a drawing in Inventor and I have several views and details and sections. Throughout making the drawing, I've created and deleted views. Whenever I do this, say the first view I placed was 'L', and then I delete view 'L', and make a new view. Inventor automatically labels this view 'M' instead of 'L', even though I don't have an 'L' view. This has caused me to have big gaps in the lettering of my views. Is there a way to "reset" the lettering so Inventor goes back through and re-letters everything starting from 'A'?
View 3 Replies View Relatedin paper space the blue lettering in the wc area shows up, but in paper space they do not, there is no layers turned off or funny colours problems as far as I can see.
I tried putting the blue lettering on to the remtex layer that shows up in paper space and still its the same ?
I need to dels a ring in concave shape. Its very easy to do it in 3D model in flat shape but how do I do it in Concave form?
View 9 Replies View RelatedCan AutoCAD do something like Showcase - display two drawings side by side and zoom them simultaneously?
View 2 Replies View RelatedI just installed AutoCAD LT 2008 on another computer, it did fine for a couple of days then I received an error. Application failed to start because side by side configuration is incorrect see event log for further details. This is a "fresh" computer with vista, but since it ran okay a few days, I don't think that is a factor. I am not running another version on it, though I did intall this upgrade without first putting my 2006 on it, but if that was the case, why did it run a few days? How do I access the event log?
View 4 Replies View RelatedIs it possible for me to plot 2 pdf plots side by side on to A1 as we have no A2 paper?
View 5 Replies View RelatedWhen applying a linetype to a curved line (e.g. polyline, arc, circle), the direction of the linetype reverses at every change from convex to concave. The error does not occur with straight segments. The REVERSE command does not work, because it will change the direction of the entire polyline. In fact, the reverse command does not even recognize and arc.
View 3 Replies View RelatedThe problem I'm having with Skin Morph is that it's skewing my vertices side-to-side locally.
I'm using Skin Morph to better preserve the volume around the two joints of each finger of my hand model (See Arm1).
The two skin morph targets were created for the index finger while it was in the same position as the second image (Arm2).
I repeated this process, creating skin morph targets for the other two joints on the three other fingers and on the thumb.
The problem comes when I rotate the knuckle joint in any axis, in the third image (Arm3) I've rotated the knuckle downwards and you can see the vertices affected by the Skin Morph modifier have skewed to the left. When I turn the modifier off the vertices go back to their original position - so the problem isn't being caused by something like non-uniform scaling of my model (I reset the transforms before skinning).
The fourth image (Arm4) just shows the basic child/parent relationship that I've setup with the Bones and SplineShapes.
The fifth images show the (perhaps strange) position of the Driver Bone Matrix and the Morph Bone Matrix which could be constributing to the problem somehow.
I've uploaded the file so that you can explore my scene. armrigskinmorphproblems.zip
3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7
I need to put two pictures side by side to merge one person into a group shot. I had it once, but, the image of the one person was too big, and I could not figure out how to put that picture back and get another one to try.
View 1 Replies View RelatedIn Photoshop CS6, a very important button is missing from the toolbar — the one to show two images side-by-side or above-and-below, and multiple images in other arrangements. I need this button — it’s an important part of my. (BTW, the button is still in Illustrator CS6.)
View 7 Replies View RelatedIm having a problem editing a photo 'face' one side 'left' side is lighter than the right side because of lighting. I was wondering If I could get both sides even prefably the lighter side like the normal side.
Is this possible? Because everytime I try edit the lighter side it still remains lighter.
Is it possible to combine two side-by-side photos into a single photo
View 1 Replies View RelatedWhere can you compare 2 photos side by side in Full Screen in Elements 11? Version 9 has this feature under Display View.
View 1 Replies View RelatedI have two picture files and I just want to create one file, displaying both pictures side by side. I have been reveiwing all of the functions in my Adobe Photoshop Elements Version 11 and I can't figure out how to do it.
View 2 Replies View RelatedI've just recently purchased PSP X4 since they touted that it was much faster loading and more stable (X3 was horrible about crashing). I continue to be amazed at how they (Corel) can just keep digging a hole instead of actually improving this product. I can see why they continue to lose market share.
1) I can no longer open mulitple images at the same time for side-by-side comparison. The work area now will only accommodate 1 open file at a time.
2) I miss not having the file size included in the data box that appears when you hold the cursor over a thumbnail. It was always handy when downsizing (resizing) photos for posting.
3) It is a pain now to have to go back and forth from the "EDIT" tab to the "MANAGE" tab to view full-sized photos (without having to open one at a time). They really screwed the pooch in X2 or X3 (can't remember) when they got rid of the old Organizer format. It was soooo easy to navigate; you had a screen full of thumbnails, you saw what you wanted and clicked it open....just too easy I guess!!! I was hoping they would go back to it for this version. I know in other forums, this change really rankled a lot of users. They just seem to bounce around trying different things. I wonder who the h*ll they use to test this stuff in-house.
I do like the faster speed, but don't know if I'll go for any more versions after this or not (been here since V.7 when JASC owned it). Big mistake selling if off to Corel. I've just about had it and there is some decent up and coming competition out there nowdays.