AutoCAD Inventor :: How To Model Concave Shape Ring
Jun 24, 2012I need to dels a ring in concave shape. Its very easy to do it in 3D model in flat shape but how do I do it in Concave form?
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Fill Concave Space
Dec 22, 2012I am working on a project and figuring out a way to fill a concave space I have with a seperate solid that takes up the exact amount of space. I would like for this new solid to be its own part. I will post a picture so you can understand what I am reffering to. As you can see, there is a concave space in the middle of the design; what I am looking to do is fill this area with a type of foam, so I need to model something that fills all the spaces up to the top plane.
I have tried using the thicken/offset tool but it gives me errors on vertexs and such and I have tried many different selection variants. I did get the space to fill in but then ran into the problem of it being all one solid, not something I could take out and make a different part, which is what I am looking to do.
AutoCAD Inventor :: Make A Concave Rack
Jun 3, 2013I need to make a rack for a machine I am designing. We use a variation of this now but I need to change the rack we have always used. The rack is on a radius and the teeth are on the inside of said radius. I plan on using the same tooth profile that we are currently using but i was wondering if there was an easy way to pattern this.
View 9 Replies View RelatedAutoCAD Inventor :: How To Cut Grooves For BX Ring Gaskets
Oct 8, 2013I made an API-spec 10K cross, 7 1/16" x 2 1/16". I got everything done including the passages and boltholes for the studs. But I need to cut grooves for the BX ring gaskets. It is basically a block of steel with two different size holes through the center with bolt circles (and ring gasket groove) at each opening. I am still a bit of a beginner and I am stumped on this one problem. If it were AutoCAD I would have cranked out the solid model in about 15 minutes (or less if in a hurry) but I want to learn Inventor.
Inventor 2013, Windows 7
AutoCAD Inventor :: Extrude A Ring Formed By Two Circles
Jan 18, 2012I was trying to extrude a ring formed by two circles with vb.net for a part.
Think I need define the profile with sketch block. If there any sample code shows how to use it? Is there a website like the autocad.net where I can get the sample for the api?
AutoCAD Inventor :: How To Place 4 Chains On The Top Bracket To A Ring
Sep 11, 2012I started to model up a lifting cradle but do not know how to progress further.I attached a 2013 version of model done so far. How can i place 4 chains on the top bracket to a ring?
View 7 Replies View RelatedAutoCAD Inventor :: How To Calculate Flex On Metal Ring - Stress Simulator
Oct 15, 2012I am trying to calculate flex on a metal ring I have designed and are a bit confused with the contacts that I am getting when using automatic contacts.
Please see the pictures attached for reference.
When I use automatic contacts I get all bonded contacts, but I get the impression that bonded contacts are welded and that is not the case with my design it is bonded using bolts.
Which contacts would you use for this part? Or should I simplify it? Can I run it in the stress simulator?
AutoCAD Inventor :: Embossing Text / Shape To Cone Shape Using Wrap To Face
Nov 26, 2013I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
AutoCAD Inventor :: How To Revolve A Shape Around The Shape Of Window (oval)
Feb 19, 2012i am trying to draw an aircraft and after drawing the windows, i got stuck. i am trying to revolve a shape around the shape of the window (oval) but it won't recognise that shape as an axis. i can't click it. is there a solution to this?
here is a screenshot for extra info!
AutoCAD LT :: REVCLOUD Is Finishing As Concave
Sep 15, 2011About 40% of the time, the REVCLOUD command will finish the cloud as concave. It will start correctly and be correct the entire time I am surrounding an area on my drawing and then when the last arc joins the starting point the entire cloud become inverted. Why? Is there something I can do to make it not do this? I don't seem to have any control over how it finishes. When it completes backwards, I fix it using PEDIT > Decurve then I convert the Polyline into a cloud and it appears correctly. Is there a better way?
View 9 Replies View RelatedAutoCad :: How To Create A Concave Fillet
Feb 12, 2012How do I create a concave fillet in AC2012?
Usually, when I try to fillet one edge it creates a convex fillet. and if I want it to be concave instead?
AutoCad :: How To Change Arc From Concave To Convex
Feb 20, 2012I want to draw the door in plan but the arc is coming in other direction. Here is sample drawing.
View 3 Replies View RelatedAutoCAD Inventor :: Convert Surface Model Pump To Solid Model?
Oct 4, 2011Am trying to convert this pump into solid ?
View 6 Replies View RelatedAutoCAD Inventor :: Convert Surface Model Into Solid Model?
Jan 15, 2013My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
AutoCad :: Lettering On Concave Side Of Sign
Sep 22, 2011My problem is we need to have the lettering on the concave side of the sign. How would I make the flat lettering I have in the elevation shot follow the curve of the sign in the plan view?
I usually do most of my autocad drawing in 2d, I've done a few things in 3d but I'm not that experienced. I say that because I was thinking maybe I could make a 3d model of the flat elevation shot and bend it into radius I need.
AutoCad 3D :: Make Concave Cabinet Hood?
Mar 26, 2013i have the bottom half but then it has to has curved surfaces going up
View 9 Replies View RelatedAutoCad :: Text On Concave Curves For A Sign
Oct 8, 2012I have been away from Autocad for around 6 years but just got back into it this week and now have the 2010 version.I like the "arctext" command, but it will only let me do text on convex curves and I need it to do text on concave curves for a sign I want to make..What can I do?
View 2 Replies View RelatedAutoCAD Inventor :: DXF Model - File In IPT Format As 3D Model?
Apr 12, 2012I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View RelatedAutoCAD 2010 :: Linetype Reverses At Every Change From Convex To Concave?
Jun 12, 2012When applying a linetype to a curved line (e.g. polyline, arc, circle), the direction of the linetype reverses at every change from convex to concave. The error does not occur with straight segments. The REVERSE command does not work, because it will change the direction of the entire polyline. In fact, the reverse command does not even recognize and arc.
View 3 Replies View Related3ds Max Modeling :: How To Model A Box Like Shape With Ripples Over Its Surface
Jun 21, 2012I'm trying to model a box like shape with ripples over it's surface. The box can have rounded corners and edges. The ripples need to flow over the 6 faces of the box. I want 2 or 3 sets of ripples, originating in different places, interacting with each other.
My modelling skills in Max are not great. I generally use Inventor for modelling and Max for lighting, materials, animation and rendering. I've followed loads of tutorials on ways of doing this, but haven't quite managed it yet.
My latest attempt has been to use the patchdeform tool. What I've done is
1) modelling a plane, with many segments
2) applied the ripple modifier to the plane
3) created a box with smoothed edges/corners
4) converted the box to a patch
5) tried to patchdeform the plane to the box - get 'illegal patch' error
The above work with a sphere rather than a box. I'm not convinced this is the best way to achieve what I want.
AutoCAD Inventor :: Convert Surface To Solid Model / Turn Off Yellow Edges In Surface Model
Mar 4, 2008We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
3ds Max :: How To Make A Concave Hemispherical Cylinder Cap
Feb 11, 2013I'm modelling a pen, the problem is that its bottom is not flat, it is a section of a sphere, that goes inside the pen, I've tried soft selection, relax, but I can't make the shape, I could use booleans to cut the sphere out of the model, but I' avoiding booleans because they destroy the topology.
View 8 Replies View RelatedPaint.NET :: Reverse Concave / Convex Images
Jan 26, 2012I'd like to make a texture thats got a 3d qualities (different surface depths) to appear in reverse. like an image of soap suds on a window seen from the other side: the concave bubbles would appear convex. are there any plugins for this sort of thing on Paintnet?
View 2 Replies View RelatedMaya Modeling :: Round Object With Concave Design
Apr 20, 2012So I am have been working on this model and am 90% complete and am back to where I started initially. Best technique to model the round foot with the concave design that seems to wrap around the foot (Highlighted area). I have tried a number of ways and have ran into problems such as pinching around the corners, the mesh overflowing over the top of the corners and hard edges that dont seem to want to be softened, but now I am picking the expert brains as far as a technique that might be better suited.
View 4 Replies View RelatedPhotoshop :: 3D Ring
Jan 8, 2005I am trying to make a 3d ring for my logo but not getting the desired result. There is loads of zig-zag surrounding the ring. Following are the details how I did that.
1. Ellipse Marquee Selection.
2. Ring1, Edit stroke filll, 9 px center
3. Applied inner bevel and drop shadow
Photoshop :: Text On A Ring
Jul 13, 2002I've got a picture of a ring lying on a surface (3D pic).
I'd like to make some text so it looks like it's on the ring, encircling it. How do I do that? I've tried all the free transform functions, no results.
Photoshop :: Ring Effect
Apr 14, 2006I am trying to create a ring like the one below. This one is scanned from a business card and is not very clean. I want to make a high resolution image that I can wrap around a sphere using about the same angle.
I have played around with the Ellipse tool and then tried to skew or distort the image, but I am having the most trouble with the two places the ring is broken and comes to a point.
Photoshop :: Saturn Ring?
Sep 28, 2006I have a picture of the erath, (globe). I am wanting to make a ring like staurn, so when you look at the globe, the ring will follow a curve, go around the back of the globe and then come out around the other side and join up. Basically as you see in a picture of planet Saturn.
how do i build this effect. I have tried the warp and transform tool, fine but getting the efffect that the ring goes around the back, comes out the other side is proving some what difficult.
how do I make the ring hide around the back of the globe??? I also have tried different layer and moving them about.
Photoshop :: Make A Golden Ring?
Mar 16, 2013i want to make a golden ring in photoshop i m new at designing create a golden ring and further tell me how cani fix this ring around a map of a continent
View 1 Replies View RelatedPhotoshop :: How To Embed Text On 3D Ring
Oct 6, 2012If we create a 3d ring and choose diffuse > new texture, the text is repeated several times.
I have attached a sample image. I want to see the word "HELLO" only once. How do I do this ?
Photoshop :: Record Ring Wear
Sep 23, 2008how the ring wear that makes it look like an old vinyl record sleeve that has the shape of the record worn through was simulated on the record cover below?
View 2 Replies View Related