I'd like to make a texture thats got a 3d qualities (different surface depths) to appear in reverse. like an image of soap suds on a window seen from the other side: the concave bubbles would appear convex. are there any plugins for this sort of thing on Paintnet?
View 2 RepliesI want to draw the door in plan but the arc is coming in other direction. Here is sample drawing.
View 3 Replies View RelatedWhen applying a linetype to a curved line (e.g. polyline, arc, circle), the direction of the linetype reverses at every change from convex to concave. The error does not occur with straight segments. The REVERSE command does not work, because it will change the direction of the entire polyline. In fact, the reverse command does not even recognize and arc.
View 3 Replies View RelatedI am able to put text in a vector however, I'm having problems having text and then adding reverse path text.
What I would like to do is add additional text at the bottom of the circle but concave instead of convex. I hope that makes sense. I want to have the text at the bottom wrap around the circle but like a smile so the text isn't upside down.
Is there an easy way to simply reverse colors in a two color jpg? It is an existing jpg, not one I originally created but have been given permission to use.
View 8 Replies View Relatedi would like to set a gradient in a form(exactly a text) from the stroke color to the fill color.
View 6 Replies View RelatedI can scan and preview an b/w negative but it will not show up on the work screen after being scaned. I can scan a b/w neg and then reverse it to a positive for printing !!!!!!
View 2 Replies View RelatedI have to build a convex hull around some spheres (please see attachment) - and I am not sure how to start .
View 2 Replies View RelatedHow can I make a convex hull (around an outline) in Adobe Illustrator?
View 18 Replies View RelatedAbout 40% of the time, the REVCLOUD command will finish the cloud as concave. It will start correctly and be correct the entire time I am surrounding an area on my drawing and then when the last arc joins the starting point the entire cloud become inverted. Why? Is there something I can do to make it not do this? I don't seem to have any control over how it finishes. When it completes backwards, I fix it using PEDIT > Decurve then I convert the Polyline into a cloud and it appears correctly. Is there a better way?
View 9 Replies View RelatedI'm modelling a pen, the problem is that its bottom is not flat, it is a section of a sphere, that goes inside the pen, I've tried soft selection, relax, but I can't make the shape, I could use booleans to cut the sphere out of the model, but I' avoiding booleans because they destroy the topology.
View 8 Replies View RelatedHow do I create a concave fillet in AC2012?
Usually, when I try to fillet one edge it creates a convex fillet. and if I want it to be concave instead?
I am working on a project and figuring out a way to fill a concave space I have with a seperate solid that takes up the exact amount of space. I would like for this new solid to be its own part. I will post a picture so you can understand what I am reffering to. As you can see, there is a concave space in the middle of the design; what I am looking to do is fill this area with a type of foam, so I need to model something that fills all the spaces up to the top plane.
I have tried using the thicken/offset tool but it gives me errors on vertexs and such and I have tried many different selection variants. I did get the space to fill in but then ran into the problem of it being all one solid, not something I could take out and make a different part, which is what I am looking to do.
My problem is we need to have the lettering on the concave side of the sign. How would I make the flat lettering I have in the elevation shot follow the curve of the sign in the plan view?
I usually do most of my autocad drawing in 2d, I've done a few things in 3d but I'm not that experienced. I say that because I was thinking maybe I could make a 3d model of the flat elevation shot and bend it into radius I need.
i have the bottom half but then it has to has curved surfaces going up
View 9 Replies View RelatedI need to make a rack for a machine I am designing. We use a variation of this now but I need to change the rack we have always used. The rack is on a radius and the teeth are on the inside of said radius. I plan on using the same tooth profile that we are currently using but i was wondering if there was an easy way to pattern this.
View 9 Replies View RelatedI have been away from Autocad for around 6 years but just got back into it this week and now have the 2010 version.I like the "arctext" command, but it will only let me do text on convex curves and I need it to do text on concave curves for a sign I want to make..What can I do?
View 2 Replies View RelatedSo I am have been working on this model and am 90% complete and am back to where I started initially. Best technique to model the round foot with the concave design that seems to wrap around the foot (Highlighted area). I have tried a number of ways and have ran into problems such as pinching around the corners, the mesh overflowing over the top of the corners and hard edges that dont seem to want to be softened, but now I am picking the expert brains as far as a technique that might be better suited.
View 4 Replies View RelatedI need to dels a ring in concave shape. Its very easy to do it in 3D model in flat shape but how do I do it in Concave form?
View 9 Replies View RelatedI’ve been looking for over 2 hours now how to do this and I’m still no better off, however I have learnt a few tips here and there,so I’m totally new to gfx stuff but i know how to make an image transparent.
i want the logo on the image but i dont understand how too?? ( with out getting all the grey and white boxes (around the logo on the greenhouse pic which goes white once i save it) i want the image background to still be there.
Where can i upload .PDN images?
View 2 Replies View RelatedHere is an example of what I mean --
:?: how do i do that?
I am trying to overlap two images but one is really dominating visually and is also really busy. I'd like to 'fog out' the dominating picture without losing a lot of information from it. I think making the colors less vivid would enhance the colors of the other image, but maybe there's more I can do? The images are biological and I am working on a potential scientific journal cover page, so I can't just remove things or distort to the point where it is cartoonish. I know nothing about image processing, so I feel like I'm probably complete unaware of simple methods that could do amazing things I was unaware of above and beyond just toning down contrast or saturation.
View 4 Replies View RelatedHow do I do caricature images. Is there any post for it?
View 2 Replies View RelatedHow to do something like the pic below though. I mean I can get in the rough area of it but never quite as good as this. What do you even call this? Morphing?
View 5 Replies View RelatedI have been trying to add borders to my jpeg and png images.
View 4 Replies View RelatedI have a question. When I add .gif images into Paint.NET, they're not moving..
Now I'm wondering, is there a plug-in for Paint.NET to add .gif images and edit each frame?
REmember in the darkroom if you wanted the subject to be looking right instead of left, you could do that by flipping the negative?
View 3 Replies View Relatedim taking pictures of silver and in order to bring out the silver I just duplicate the layer and screen the top layer at about 75%. I then flatten the image and save as jpg. So now that ive done this to about 350 pictures, the need arises to darken the jewelry a bit. Is it possible to reverse the screen or play around with the curves in order to get back to the original state of the picture?
View 1 Replies View RelatedI have some images that have had spherize filters put on them. I am trying to "unspherize" them. How would you recommend doing that? Is there some sort of reverse spherize filter somewhere?
View 2 Replies View RelatedI have a logo I am working on for a band. The original logo they gave me to work with is black and white (no shades of gray). Is there as way to reverse the colors so the image is black with white tracing/line art?
View 5 Replies View Related