I have a logo I am working on for a band. The original logo they gave me to work with is black and white (no shades of gray). Is there as way to reverse the colors so the image is black with white tracing/line art?
View 5 RepliesI have a 2-color image (red graphic, white background). I need to reverse the colors so that I have a white graphic on a red background.
View 3 Replies View RelatedIm in a profession where I do a lot of swapping between two colors. Basically reversing them.
Is there a Simple Macro Code out there that could accomplish this? I would be forever in your debt!
This is between objects. Not images. I dont want to invert or anything. I just want to swap colors between the two objects.
I've got an object that I've filled with a circular fill/gradient. Is there a button that allows me to swap the start color and end colors in one click? If this was a linear gradient I could just position the start and end points to reverse it but since its circular I must swap the start and end to retain the circular effect.
View 6 Replies View RelatedIs there an easy way to simply reverse colors in a two color jpg? It is an existing jpg, not one I originally created but have been given permission to use.
View 8 Replies View RelatedI recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
REmember in the darkroom if you wanted the subject to be looking right instead of left, you could do that by flipping the negative?
View 3 Replies View Relatedim taking pictures of silver and in order to bring out the silver I just duplicate the layer and screen the top layer at about 75%. I then flatten the image and save as jpg. So now that ive done this to about 350 pictures, the need arises to darken the jewelry a bit. Is it possible to reverse the screen or play around with the curves in order to get back to the original state of the picture?
View 1 Replies View RelatedI have some images that have had spherize filters put on them. I am trying to "unspherize" them. How would you recommend doing that? Is there some sort of reverse spherize filter somewhere?
View 2 Replies View Relatedsometimes when drawing a path, in the thumbnail box the item I've drawn around is shown in grey while the entire background is shown in white. This is a kind of negative of what should happen. If I make a selection from the path I get the entire background selected instead of the item.
View 1 Replies View RelatedI cant find how to reverse the Punctuation symbols.Im using CS6. attaching printscreen
View 2 Replies View RelatedHow do I reverse Photoshop Trap direction (or control it) (CMYK image - trap black to rest of image - swell it)
View 1 Replies View RelatedIs there anything that lets you select part of the image with a "Rectangle Marquee Tool" and then something that reverses that selection to everything that was unselected before, making the selected, un-selected and the un-selected, selected?
Example: I have a picture in a frame. I select the picture part leaving the frame un-selected. I need a button that reverses that selection to select the frame only, leaving the picture un-selected.
I would like to mirror a car, to look into the other direction, but i realsied when i flip horizontally, that the steering wheel also flips and goes to the other side Its the same with the texts and graphics on the car... I tried to replace it with the original and free transform it to the right position but is doesnt works. I also tried the perspective and the warp transform tools but without success...
View 1 Replies View RelatedHow to reverse the curves scale so that it reads from light to dark. I am using a Mac and CS5. Clicking in the scale appears to have no effect.
View 6 Replies View RelatedI was working on a design. I had a dark gray background and was going to do a soft white gradient effect in my selection.
When I went to do it, for some reason it was reversed. The gradient came into the selection but just above the selection was a darker color. So it looked like a gradient with a shadow all at once.
Then I looked at my layers and noticed I was not in the new layer, but I was on my background layer, so it was one layer.
So when I did the design, I went back to play with gradients and it wouldn't happen anymore. Does anyone know how this happened, it was a nice effect.
My mode was on "normal" and the only difference is that I was on a background layer already filled with color, so I thought that was it, but apparently not.
it looked pretty clean to get a gradient with a shadow effect on the outside of the selection. The only other way it does some of this effect, is when I feather the selection and use foreground/background color with the gradient tool, but it's not the same.
I want to create a path using the circle tool, then put 3 words text around the path, one along the top, and two along the bottom. But I want the text on top going clockwise, and the text on bottom going counter-clockwise, so it isn't upside down and backwards. I put the text on top, and for a moment I had the text tool reversed on bottom, but I lost it and can't get it to work again. I think I used the command key while placing the text.
how to reverse the direction of text along a path around a circle?
I trimmed an object in my template by accident (Argh!) and have now lost all the objects outside of the trim box. The files still show in my layers section, but I cannot see the objects - can I reverse this process?
I have tried to resize the canvas again but the objects still do not show....I have a back up template but have not added all my new objects to it recently.
Using CS3: I can swear at one time I knew how to do this, but I can't for the life of me get it now. What I want is the oval on it's own layer, the line above, and any overlapping or common areas knocked out as I draw.
On this sample I just selected the line, merge-selected the oval, and then deleted the selection from each. Works fine, but it's destructive, which I want to avoid. I have tried every combination of layer/blending modes, but I get nothing...
I'm running CS3 on a Vista machine with no problem excepting for this intermittent crop tool thing. Say I've got a photo but need to crop out a small rectangular shape at the right. The crop tool saves the shape and wants to crop the rest of photo.
I've dumped my prefs.
I've selected "crop" and hit the clear key.
It still selects the inverse of what I'm asking it to do. I've even looked under "select inverse" to see if I could reverse it from there.
The colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
Can I reverse an image that has been transferred to digital reversed (i.e. Slide reversed and transferred)? I'm using Elements 10.
View 2 Replies View RelatedI created the path, but for some reason it's 'reversed' or 'inverted' from what I want - is there any way to change it so the spinach is cropped properly?
View 5 Replies View RelatedIt would be cool if Adobe would have provided a Reverse checkbox for Bevel & Emboss effects, like they did for the Gradients. Is there a quick way to reverse a bevel and emboss effect or do I have to adjust each setting manually?
View 3 Replies View RelatedI have been using PSE8 successfully for several years. After using it all week, when I tried to open it today, I got a message that said something to the effect "cannot open because file is corrupt or cannot be updated and/or the catalog should be converted". Suspecting that after so many years I had too many files, I thought I needed to convert (not really knowing what that meant and no explanation was clear). After many attempts, it finally did that (converted) but now the only files that are included in the organizer are the files that were contained in my previous PSE version 6. Nothing beyond 2009 exists in this catalog. I made many albums from our travels in 2010, 2011, & 2012 that I spent hours creating and can't stomach the idea that they're lost.
how to, or even if it is possible, to find the old (new) catalog and switch it back. I'm thinking I could do a system restore but am not sure that's the most efficient way to fix this problem.
I am using an HP Pavillion desktop, 320 GB hard drive (92 GB free), Vista Home Premium X64
How do I reverse an image-it is printed backwards
View 4 Replies View RelatedCDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
We are working with a company that will be sending us DWG files. They do not use the same layer colors as us and I am trying to find a lisp that would allow me to set up a table with the layer names and the color I want them to be so that I can quickly change all the layers to our companys color standards.
Example:
Layer 1 = Color 1
Layer 2 = Color 15
Layer 3 = Color 10
Etc.
I don't know a lot about lisp but I figure if I could find a lisp that did this I could plug in my layer/color assignments and it would work.
Using CS6 on a MacBookPro Is there a way to find the closest matching Pantone spot colors to the cmyk colors I've created in Illustrator? I know it's easy in Photoshop using the color picker, but there must be a way to do this in Illustrator.
View 4 Replies View RelatedYou can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?