I trimmed an object in my template by accident (Argh!) and have now lost all the objects outside of the trim box. The files still show in my layers section, but I cannot see the objects - can I reverse this process?
I have tried to resize the canvas again but the objects still do not show....I have a back up template but have not added all my new objects to it recently.
Possible to reverse the stacking order of several objects?
View 8 Replies View RelatedHow the PMS color palettes "simulate" on screen how the color will print on different substrates (glossy vs matte vs uncoated paper). That's great for comps, but if you convert it to CMYK to print it, and the values are representing a "simulated" color it won't look correct (by that I mean come close to matching the spot color). For example, the uncoated palette simulates the color by making them appear a bit washed out on screen - pretty good visual simulation. But it might do so by adding black and cyan to orange for example, etc. - effectively dulling the original color.
So if I convert that to CMYK within the new Pantone + color palette, and then send it to the printer - it won't appear as it did on screen, it will dull the end color even more because it's converted the color to the dull simulated version - what a disaster! It's only doing half the job - showing us what it should look like on screen. In order to be truly efficient for design professionals the CMYK conversion might remove black and cyan completely to effectively brighten the color in the final output on uncoated paper. I would prefer it just stick to the standard conversion, which Pantone did have as a standard palette option (PMS to process), and then I can adjust if I think it's necessary.
Any corporate branding system will likely start with a PMS spot color palette for the identity. Then it will build into many different adaptations - full color brochures, large format banners and trade show graphics, website, advertising. So any corporate branding system will need to have PMS, CMYK and RGB versions of their main corporate color palette. There was a standard for these translations that was automatically consistent in the Adobe software and that is now all over the place, so it relies on individuals manually adapting the color mixes for final use - what a great way to screw things up.
I was making buttons for my nav bar and I had some trouble. I wanted the rounded rectangles as the buttons, but I can't get just the rounded part of the rectangle. For example. I make the button in IR just as I want it, with a transparent background and everything. How do I save it as a jpg so as to get just the rounded rectangle, and not all the white background? I know I can trim it down, but there's still the white around the borders. How do you save a non-square-like area?
View 3 Replies View RelatedI wan to trim / crop a layer which falls out of the canvas. From I search I did it turns out that by selecting all and the crop will do the job, but in my case it does not and I do not understand why.
Here is an image to see what I am talking about.
What are some of the techniques to trim unwanted pounds off a subject in your photo to make them look more trim and fit? What are the best and easiest ways to accomplish this?
I am wanting to trim the waist, hips and stomach area on a few models in a profile pose to make them more shapely.
how I would remove that distinct "cutout" feel from object edges that you cut
You have a (we'll say) face in the center of an image. Surrounding the face is just a black background. So you cut out the face, the result is the face with a black outline, and this is what I want to figure out how to fix.
What is the technique used to remove this? I dont actually have Photoshop but a descriptive solution with proper terms would help me alot. (For future reference)
I have a shape that I want to use for a number backing on a racecar. The problem is that I want the lines to be 5mm thick right around, or any thickness just as long as it is uniform.
The shape/image in question:
I want to then copy the shape into a new layer, and resize it to fit inside the old shape to look something like this:
So to get back on topic, the real question is how to I make the outer lines the same thickness right around?
How to do trimming I would love to know.
View 9 Replies View RelatedI'd like to trim mts video clips and save these trimmed clips in the same mts format (to avoid losses due to re-rendering in another format). It seems that there are no mts output options available (all hi-def options save the trimmed clip in mpeg format).
View 5 Replies View RelatedI just bought this program and when ever I go to save or export, image automatically trims itself. How do I turn off the auto trimming, so to leave open page space around images like how it shows in the work area?
View 5 Replies View RelatedI can roll trim with the mouse - but not with the keyboard (I can slip and slide with the keyboard) - am I missing something?
Also is asymmetric/bidirectional trimming possible?
I am trying to model an electrical junction box but just cant trim some of the unwanted portions inside the junction box.
I have placed two solids, one merged into the other so that there is no gap between them and the transition is uniform. now i want to remove the extra bit of piece left inside.
surprisingly the trim command is not working ...
ACAD-electrical fittings.dwg
New to Autocad and using Autocad 2010. I am trying to trim a door jamb and attached my project in this thread. The attached picture coming close to finishing the drawing. There are other door jambs in the drawing that I have not started.
Trimming the door jamb I have selected several lines. Appearing in the attachment as two horizontal lines located above the lower left square and the left vertical outside double line border. These are my step to trim these lines.
Extend Command. Select both horizontal lines. Press Enter to end the command.
Trim Command: Select both horizontal lines once more. Enter.
Select vertical outside lines. Enter twice.
Trim Command running select both horizontal lines again. press Enter.
Completing the jamb in the drawing the two horizontal lines still there only as dashed lines. After saving the project these lines appear as solid lines.
Coming close with these steps. Is it possible to show me how to trim the door jamb following these guide lines I have outlined.
Cabin04a.jpg.dwg
Can you trim or break a line where it meets a 3d surface? i'm using Acad 2013.
View 3 Replies View RelatedIs there a command or lisp that will allow you to select a closed polyline and trim everything outside of it even if the items are blocks that aren’t exploded?
I’ve tried EXTRIM but that fails on blocks.
is there a way to do trimming autocad style?
View 2 Replies View RelatedREmember in the darkroom if you wanted the subject to be looking right instead of left, you could do that by flipping the negative?
View 3 Replies View Relatedim taking pictures of silver and in order to bring out the silver I just duplicate the layer and screen the top layer at about 75%. I then flatten the image and save as jpg. So now that ive done this to about 350 pictures, the need arises to darken the jewelry a bit. Is it possible to reverse the screen or play around with the curves in order to get back to the original state of the picture?
View 1 Replies View RelatedI have some images that have had spherize filters put on them. I am trying to "unspherize" them. How would you recommend doing that? Is there some sort of reverse spherize filter somewhere?
View 2 Replies View RelatedI have a logo I am working on for a band. The original logo they gave me to work with is black and white (no shades of gray). Is there as way to reverse the colors so the image is black with white tracing/line art?
View 5 Replies View Relatedsometimes when drawing a path, in the thumbnail box the item I've drawn around is shown in grey while the entire background is shown in white. This is a kind of negative of what should happen. If I make a selection from the path I get the entire background selected instead of the item.
View 1 Replies View RelatedI have a 2-color image (red graphic, white background). I need to reverse the colors so that I have a white graphic on a red background.
View 3 Replies View RelatedI can't seem to trim a clip in the overlay track. When I'm scrubbing through it the F3 and F4 keys will not work. This is a clip that I have already used Multi-trim to create.
View 2 Replies View RelatedIs there a way of trimming an SDF or SHP file with multiple polygons within a boundary buffer zone, but keep the entire of all of the crossing polygons.
I have managed to create a feature overlay for the trimming selection but the 'Union' command creates a new layer with all of both SDF files I'm comparing, not just the ones within the buffer zone.
I created a structural member of Pro-Panel II and placed it like a column. This works great, except when I need to trim the excess off at the end of a wall. I tried using a body modifies and it works in model view, but it doesn't in plan view.
View 1 Replies View RelatedHow to trim an array? I want to trim out array items as if using a crossing window, not as the trim command does. See attachments. I want to be able to trim as in array 2, not as array 1.
View 9 Replies View RelatedIs it possible to grab the head or tail of the video segment and have the timeline stay stationay and you drag the edge to the timeline position?
View 6 Replies View RelatedIf I work in CFX on a shot in, say, a 60" commercial and then want to drop it into the 30" cutdown. I need to trim a couple of frames from the head to match the cutdown, if I do this gesturally, it un-renders and when I re-render, all the source material has been slipped inside CFX.
View 2 Replies View RelatedHas noticed that the offset command has changed in 2010? (unless i am going mad) see image below. i'm sure if you offset a polyline, with no node at the crossing point, in pre-2010, it would end up as second image.
offset.JPG
But now i get the 3rd and 4th types, which i admit is pretty good for offsetting both sides and deleting original construction line, but not always better that the original method. Is there a variable or option somewhere to change the performance?
how to cut or split more than one face of a surface model in one go. The only way (it seems) is to use the Trim command for every face you need to trim, whereas I want to choose the cutting tool (a plane or face) and then choose a whole lot of faces (by holding CTRL and clicking the faces) and trim them all in one go. Is this possible? I can do this in Fusion, but Fusion is way too slow on my PC compared to Inventor.
I also tried extruding a sketch through the surfaces to cut them, but it doesn't work (Inventor complains that there aren't any solids to cut).