I wan to trim / crop a layer which falls out of the canvas. From I search I did it turns out that by selecting all and the crop will do the job, but in my case it does not and I do not understand why.
Here is an image to see what I am talking about.
I was making buttons for my nav bar and I had some trouble. I wanted the rounded rectangles as the buttons, but I can't get just the rounded part of the rectangle. For example. I make the button in IR just as I want it, with a transparent background and everything. How do I save it as a jpg so as to get just the rounded rectangle, and not all the white background? I know I can trim it down, but there's still the white around the borders. How do you save a non-square-like area?
View 3 Replies View RelatedI have a psd with 15 layers inside. All the layers are icons and some of these have a bit of whitespace and I wanted to crop each icon to clean it up.
I tried to select the layer and use the rectangular marquee and then hitting crop. All this does is crop the entire psd.
There should be a way to do what I'm trying to do without having to copy the actua layer into a new doc crop there then add it back in am I right?
I have a layer in which I want to crop it-after the cropping I want this layer to have a specific shape-the shape I intend to use is not from the custom shapes list.
Actually it is a type layer.
So I want to use this type layer and with it crop another shape layer, so the latter, takes the form of the later.
How am I going to achieve the above-I tried with a clipping mask but could not do it.
With the new features added to the Crop tool I've noticed when you clip and image the remaining pixels "hidden" by the crop still are affected by layer effects. I've cropped an image, clipped it, removed the background and when I apply a drop shadow to the remaining pixels, the edge of my photo has a shadow. Other than clipping first, then cropping away, Is the best solution to set the crop tool to delete cropped pixels?
View 3 Replies View Relatedhow to disable the cropping tool from cutting out data on layers when you do want it keeping!... its ok if you don't.. but there are times when you want to crop an image and not lose that hidden data!
also why can't you drag n'drop layers to another document tab!! its stupid workflow not to mention all the other lacking areas of CS4 tabbed ui.. like mousewheel functionality.
What are some of the techniques to trim unwanted pounds off a subject in your photo to make them look more trim and fit? What are the best and easiest ways to accomplish this?
I am wanting to trim the waist, hips and stomach area on a few models in a profile pose to make them more shapely.
how I would remove that distinct "cutout" feel from object edges that you cut
You have a (we'll say) face in the center of an image. Surrounding the face is just a black background. So you cut out the face, the result is the face with a black outline, and this is what I want to figure out how to fix.
What is the technique used to remove this? I dont actually have Photoshop but a descriptive solution with proper terms would help me alot. (For future reference)
I have a shape that I want to use for a number backing on a racecar. The problem is that I want the lines to be 5mm thick right around, or any thickness just as long as it is uniform.
The shape/image in question:
I want to then copy the shape into a new layer, and resize it to fit inside the old shape to look something like this:
So to get back on topic, the real question is how to I make the outer lines the same thickness right around?
I trimmed an object in my template by accident (Argh!) and have now lost all the objects outside of the trim box. The files still show in my layers section, but I cannot see the objects - can I reverse this process?
I have tried to resize the canvas again but the objects still do not show....I have a back up template but have not added all my new objects to it recently.
How to do trimming I would love to know.
View 9 Replies View RelatedI'd like to trim mts video clips and save these trimmed clips in the same mts format (to avoid losses due to re-rendering in another format). It seems that there are no mts output options available (all hi-def options save the trimmed clip in mpeg format).
View 5 Replies View RelatedI just bought this program and when ever I go to save or export, image automatically trims itself. How do I turn off the auto trimming, so to leave open page space around images like how it shows in the work area?
View 5 Replies View RelatedI can roll trim with the mouse - but not with the keyboard (I can slip and slide with the keyboard) - am I missing something?
Also is asymmetric/bidirectional trimming possible?
I am trying to model an electrical junction box but just cant trim some of the unwanted portions inside the junction box.
I have placed two solids, one merged into the other so that there is no gap between them and the transition is uniform. now i want to remove the extra bit of piece left inside.
surprisingly the trim command is not working ...
ACAD-electrical fittings.dwg
New to Autocad and using Autocad 2010. I am trying to trim a door jamb and attached my project in this thread. The attached picture coming close to finishing the drawing. There are other door jambs in the drawing that I have not started.
Trimming the door jamb I have selected several lines. Appearing in the attachment as two horizontal lines located above the lower left square and the left vertical outside double line border. These are my step to trim these lines.
Extend Command. Select both horizontal lines. Press Enter to end the command.
Trim Command: Select both horizontal lines once more. Enter.
Select vertical outside lines. Enter twice.
Trim Command running select both horizontal lines again. press Enter.
Completing the jamb in the drawing the two horizontal lines still there only as dashed lines. After saving the project these lines appear as solid lines.
Coming close with these steps. Is it possible to show me how to trim the door jamb following these guide lines I have outlined.
Cabin04a.jpg.dwg
Can you trim or break a line where it meets a 3d surface? i'm using Acad 2013.
View 3 Replies View RelatedIs there a command or lisp that will allow you to select a closed polyline and trim everything outside of it even if the items are blocks that aren’t exploded?
I’ve tried EXTRIM but that fails on blocks.
is there a way to do trimming autocad style?
View 2 Replies View RelatedI can't seem to trim a clip in the overlay track. When I'm scrubbing through it the F3 and F4 keys will not work. This is a clip that I have already used Multi-trim to create.
View 2 Replies View RelatedIs there a way of trimming an SDF or SHP file with multiple polygons within a boundary buffer zone, but keep the entire of all of the crossing polygons.
I have managed to create a feature overlay for the trimming selection but the 'Union' command creates a new layer with all of both SDF files I'm comparing, not just the ones within the buffer zone.
I created a structural member of Pro-Panel II and placed it like a column. This works great, except when I need to trim the excess off at the end of a wall. I tried using a body modifies and it works in model view, but it doesn't in plan view.
View 1 Replies View RelatedHow to trim an array? I want to trim out array items as if using a crossing window, not as the trim command does. See attachments. I want to be able to trim as in array 2, not as array 1.
View 9 Replies View RelatedIs it possible to grab the head or tail of the video segment and have the timeline stay stationay and you drag the edge to the timeline position?
View 6 Replies View RelatedIf I work in CFX on a shot in, say, a 60" commercial and then want to drop it into the 30" cutdown. I need to trim a couple of frames from the head to match the cutdown, if I do this gesturally, it un-renders and when I re-render, all the source material has been slipped inside CFX.
View 2 Replies View RelatedHas noticed that the offset command has changed in 2010? (unless i am going mad) see image below. i'm sure if you offset a polyline, with no node at the crossing point, in pre-2010, it would end up as second image.
offset.JPG
But now i get the 3rd and 4th types, which i admit is pretty good for offsetting both sides and deleting original construction line, but not always better that the original method. Is there a variable or option somewhere to change the performance?
how to cut or split more than one face of a surface model in one go. The only way (it seems) is to use the Trim command for every face you need to trim, whereas I want to choose the cutting tool (a plane or face) and then choose a whole lot of faces (by holding CTRL and clicking the faces) and trim them all in one go. Is this possible? I can do this in Fusion, but Fusion is way too slow on my PC compared to Inventor.
I also tried extruding a sketch through the surfaces to cut them, but it doesn't work (Inventor complains that there aren't any solids to cut).
So I make a line and then make an arc on that line. I dimension the arc so that it is 180 degrees and I dimension it with a specific length. I then use the rectangular pattern command to copy multiple arcs onto this line. I now need to trim the bottoms of the arcs away (the parts of the line under each arc) But once I select the trim command I cannot trim this area! The lines I need to trim won't even highlight. It appears they are locked by a dimension made when I copied the arcs across the line. This dimension doesn't appear to be able to be deleted.
View 5 Replies View RelatedI drew the polar arrayed rectangle as attached and tried to trim the inside lines to create an octagon but i cant trim the object.
However, if i try the same thing without polar arraying ( i.e just by drawing the two rectangles similarly) it works. I would like to know what might be causing this.
What tool(s) should I use to trim a shape parallel to its contour. Specifically what I want to do is to create new font characters from existing ones by say, in the case of the letter "O," trimming the same amount from the outer and inner edge, ie reducing the width of the stroke. The new character would capable of being centrally placed over the existing one exposing the border of the existing one. Ideally, the tool would have a similar effect to the "offset" tool in Google's Sketchup
View 4 Replies View RelatedA coworker and I are having the same problem with dimensions. For example, we have a polyline that has been dimensioned and then we will either need to trim or break a small portion out. When we trim or break the line the dimensions on that line fly all over the place so we end up needed to re-dimension everything. We have had this problem in AutoCAD 2008, 2010, and 2011. Maybe we need to change a variable? The polylines have a zero Z-axis and it does not happen everytime we trim or break but enough to become annoying. Our CAD Manager had as try to disassociate the dimension, break the line, and then reassociate it but that didn't work; the dimensions were still shifted around.
View 1 Replies View Related