AutoCad :: How To Do Trimming
Jul 20, 2011How to do trimming I would love to know.
View 9 Replies
ADVERTISEMENT
AutoCad 3D :: Trimming One Solid With Another - Not Happening
Jun 9, 2012I am trying to model an electrical junction box but just cant trim some of the unwanted portions inside the junction box.
I have placed two solids, one merged into the other so that there is no gap between them and the transition is uniform. now i want to remove the extra bit of piece left inside.
surprisingly the trim command is not working ...
ACAD-electrical fittings.dwg
AutoCad :: Trimming A Door Jamb
Nov 18, 2011New to Autocad and using Autocad 2010. I am trying to trim a door jamb and attached my project in this thread. The attached picture coming close to finishing the drawing. There are other door jambs in the drawing that I have not started.
Trimming the door jamb I have selected several lines. Appearing in the attachment as two horizontal lines located above the lower left square and the left vertical outside double line border. These are my step to trim these lines.
Extend Command. Select both horizontal lines. Press Enter to end the command.
Trim Command: Select both horizontal lines once more. Enter.
Select vertical outside lines. Enter twice.
Trim Command running select both horizontal lines again. press Enter.
Completing the jamb in the drawing the two horizontal lines still there only as dashed lines. After saving the project these lines appear as solid lines.
Coming close with these steps. Is it possible to show me how to trim the door jamb following these guide lines I have outlined.
Cabin04a.jpg.dwg
AutoCad 3D :: Trimming A Line To 3D Surface
Aug 16, 2013Can you trim or break a line where it meets a 3d surface? i'm using Acad 2013.
View 3 Replies View RelatedAutoCad 2D :: Trimming Outside A Closed Polyline
May 16, 2013Is there a command or lisp that will allow you to select a closed polyline and trim everything outside of it even if the items are blocks that aren’t exploded?
I’ve tried EXTRIM but that fails on blocks.
AutoCAD Map 3D :: Trimming SDF / SHP File With Multiple Polygons
Apr 17, 2012Is there a way of trimming an SDF or SHP file with multiple polygons within a boundary buffer zone, but keep the entire of all of the crossing polygons.
I have managed to create a feature overlay for the trimming selection but the 'Union' command creates a new layer with all of both SDF files I'm comparing, not just the ones within the buffer zone.
AutoCAD Architecture :: Trimming A Structural Member
Jul 28, 2011I created a structural member of Pro-Panel II and placed it like a column. This works great, except when I need to trim the excess off at the end of a wall. I tried using a body modifies and it works in model view, but it doesn't in plan view.
View 1 Replies View RelatedAutoCAD 2013 :: Trimming Away Array Items
Jul 23, 2013How to trim an array? I want to trim out array items as if using a crossing window, not as the trim command does. See attachments. I want to be able to trim as in array 2, not as array 1.
View 9 Replies View RelatedAutoCad 2D :: Offset - New Variable For Clever Trimming?
Dec 21, 2011Has noticed that the offset command has changed in 2010? (unless i am going mad) see image below. i'm sure if you offset a polyline, with no node at the crossing point, in pre-2010, it would end up as second image.
offset.JPG
But now i get the 3rd and 4th types, which i admit is pretty good for offsetting both sides and deleting original construction line, but not always better that the original method. Is there a variable or option somewhere to change the performance?
AutoCAD Inventor :: Trimming Multiple Faces At Once
Feb 3, 2012how to cut or split more than one face of a surface model in one go. The only way (it seems) is to use the Trim command for every face you need to trim, whereas I want to choose the cutting tool (a plane or face) and then choose a whole lot of faces (by holding CTRL and clicking the faces) and trim them all in one go. Is this possible? I can do this in Fusion, but Fusion is way too slow on my PC compared to Inventor.
I also tried extruding a sketch through the surfaces to cut them, but it doesn't work (Inventor complains that there aren't any solids to cut).
AutoCAD Inventor :: Copying A Component And Then Trimming
Apr 6, 2012So I make a line and then make an arc on that line. I dimension the arc so that it is 180 degrees and I dimension it with a specific length. I then use the rectangular pattern command to copy multiple arcs onto this line. I now need to trim the bottoms of the arcs away (the parts of the line under each arc) But once I select the trim command I cannot trim this area! The lines I need to trim won't even highlight. It appears they are locked by a dimension made when I copied the arcs across the line. This dimension doesn't appear to be able to be deleted.
View 5 Replies View RelatedAutoCad :: Trimming Polar Arrayed Rectangle
Aug 4, 2012I drew the polar arrayed rectangle as attached and tried to trim the inside lines to create an octagon but i cant trim the object.
However, if i try the same thing without polar arraying ( i.e just by drawing the two rectangles similarly) it works. I would like to know what might be causing this.
AutoCad 2D :: Dimensions Going All Over Place After Trimming A Line
Mar 22, 2011A coworker and I are having the same problem with dimensions. For example, we have a polyline that has been dimensioned and then we will either need to trim or break a small portion out. When we trim or break the line the dimensions on that line fly all over the place so we end up needed to re-dimension everything. We have had this problem in AutoCAD 2008, 2010, and 2011. Maybe we need to change a variable? The polylines have a zero Z-axis and it does not happen everytime we trim or break but enough to become annoying. Our CAD Manager had as try to disassociate the dimension, break the line, and then reassociate it but that didn't work; the dimensions were still shifted around.
View 1 Replies View RelatedAutoCAD 2013 :: Trimming Lines With Circles Or Ellipses?
Sep 11, 2013I drawning 2 circle as radius 250mm.the distance between two circle is 0.08mm I drawing one line segment between two circle and I Expanding line segment as length 20mm.then I offset this line The amount 2.5 mm in vertical side up.
When I trim these horizontal line that are Cross-Being with two circle the Remaining line segment is shorter than real distance between two arcs I thinks its happening?
Also I attached 7 pics I try show my problem.
Also when I want obtain horizontal distance with distance command or by linear the intersection is not start from circumference.
whats this and how I can get real horizontal distance between two arcs
AutoCAD Inventor :: Trimming Intersecting Parts In An Assembly
Oct 29, 2010I need to trim a part that intersects with many other parts in several different sub-assemblies - on an angle.
**Attached is an image of my problem.
Split tool is disabled. It is only usable once I drill down into the assembly/part - it will not select the other cutting objects higher up the browser stack.They become ghosted.
What I need is a tool that projects intersection lines. Does Inventor have something like this? Standard projection lines on the part is not working because the cutting objects are not 90 degrees angled to the part to be cut.
This may be easy,.. I am just not seeing a way to do this with out a bunch of work-a-rounds.
AutoCAD Inventor :: Trimming Solids In Assembly Mode
Mar 18, 2013we have to solids put in one assembly. those two solids are intersecting. how can I trim first solid with shape of second one?
View 3 Replies View RelatedAutoCAD Inventor :: Trimming Pipes Used In Frame Generator
May 27, 2011I need to trim pipes of different diameters and diagonally at corners of a frame. Is this doable? Trim only seems to work with flat faces.
View 9 Replies View RelatedAutoCAD 2010 :: Trimming Circles Against Tangent Lines?
Sep 30, 2013I am working with a drawing provided to me by someone else, and where there should be arcs they have multiple line segments. I need a radius for what I'm doing, so I drew a circle with TTR and then tried to trim against the tangent lines to get my arc. However, sometimes this works and sometimes it doesn't. why this doesn't always work?
View 5 Replies View RelatedAutoCAD Architecture :: Inserting AEC Window And Smart Wall Isn't Trimming
Mar 10, 2010we just recently went from 2008 to 2010 Autocad Architecture. the windows from a 2008 file had the windows in the smart walls and would trim the wall... however, i opened the file in 2010 and all the windows are showing up, but not trimming the smart wall.
View 9 Replies View RelatedAutoCAD Architecture :: Mysterious Outline Of Block When Moving / Trimming
Mar 27, 2012When I trim or move a block (roof trim mostly) there is an outline of the block I am working on, I know the solution, if you move the block over, it moves but the outline stays where the block used to be, then I copy it back and delete the outline or original block that made the outline and its back to normal.
-Trim BUg02 is my trim after its been trimmed with mysterious outline left over
-Trim Bug03 is my trim after being moved with mysterious outline left in objects original place
AutoCAD Architecture :: Trimming Wall Components To Roof Slab?
Jun 12, 2012I am using AutoCad Architecture 2011. In the Style Manager, I created a wall style using a 8"CMU unit plus a 2" insulation board. I have a gable roof slab that intersects with the wall. I want to trim the insulation board along the bottom of the roof slab, and show the CMU above the roof slab.
View 3 Replies View RelatedAutoCAD Inventor :: Sweep - Trimming And Discarding Faces Error
Sep 26, 2013I'm trying to sweep six circles along 6 3d sketches however I receive the 'The attempted operation had problems trimming and discarding faces. Try again with different outputs.
I have been suffering with the above error message and i am at my wits end. I've tried tracing the the geometry, played dot to dot joining up the points but to no avail. Some sweeps work and others don't.
AutoCAD Inventor :: Drawing Based IPN Shows Trimming Surfaces Even Visibility Is Turned Off
Oct 1, 2012Drawing based on .ipn shows (should not show) surfaces used to trim, even their visibility are turned off.
Drawing is normal if based on .iam.
Only one part of the assembly is the problem. Other parts, also with trimming surfaces, are shown normal.
Please see images in .pdf attached.
Photoshop :: Cropping/Trimming
Mar 4, 2003I was making buttons for my nav bar and I had some trouble. I wanted the rounded rectangles as the buttons, but I can't get just the rounded part of the rectangle. For example. I make the button in IR just as I want it, with a transparent background and everything. How do I save it as a jpg so as to get just the rounded rectangle, and not all the white background? I know I can trim it down, but there's still the white around the borders. How do you save a non-square-like area?
View 3 Replies View RelatedPhotoshop :: Cropping / Trimming Layer
Jun 21, 2012I wan to trim / crop a layer which falls out of the canvas. From I search I did it turns out that by selecting all and the crop will do the job, but in my case it does not and I do not understand why.
Here is an image to see what I am talking about.
VideoStudio :: Lossless MTS Clip Trimming?
Nov 28, 2010I'd like to trim mts video clips and save these trimmed clips in the same mts format (to avoid losses due to re-rendering in another format). It seems that there are no mts output options available (all hi-def options save the trimmed clip in mpeg format).
View 5 Replies View RelatedPhotoshop :: Trimming Human Figures...
Dec 12, 2006What are some of the techniques to trim unwanted pounds off a subject in your photo to make them look more trim and fit? What are the best and easiest ways to accomplish this?
I am wanting to trim the waist, hips and stomach area on a few models in a profile pose to make them more shapely.
Photoshop :: Trimming Object Edges
Mar 30, 2006how I would remove that distinct "cutout" feel from object edges that you cut
You have a (we'll say) face in the center of an image. Surrounding the face is just a black background. So you cut out the face, the result is the face with a black outline, and this is what I want to figure out how to fix.
What is the technique used to remove this? I dont actually have Photoshop but a descriptive solution with proper terms would help me alot. (For future reference)
Xara :: How To Turn Off Auto Trimming
Oct 30, 2013I just bought this program and when ever I go to save or export, image automatically trims itself. How do I turn off the auto trimming, so to leave open page space around images like how it shows in the work area?
View 5 Replies View RelatedAutoDesk Smoke :: Trimming With Keyboard?
Jun 17, 2012I can roll trim with the mouse - but not with the keyboard (I can slip and slide with the keyboard) - am I missing something?
Also is asymmetric/bidirectional trimming possible?
Illustrator :: Trimming Auto-cad Style?
Aug 2, 2012is there a way to do trimming autocad style?
View 2 Replies View Related