I am trying to make a 3d ring for my logo but not getting the desired result. There is loads of zig-zag surrounding the ring. Following are the details how I did that.
1. Ellipse Marquee Selection.
2. Ring1, Edit stroke filll, 9 px center
3. Applied inner bevel and drop shadow
I've got a picture of a ring lying on a surface (3D pic).
I'd like to make some text so it looks like it's on the ring, encircling it. How do I do that? I've tried all the free transform functions, no results.
I am trying to create a ring like the one below. This one is scanned from a business card and is not very clean. I want to make a high resolution image that I can wrap around a sphere using about the same angle.
I have played around with the Ellipse tool and then tried to skew or distort the image, but I am having the most trouble with the two places the ring is broken and comes to a point.
I have a picture of the erath, (globe). I am wanting to make a ring like staurn, so when you look at the globe, the ring will follow a curve, go around the back of the globe and then come out around the other side and join up. Basically as you see in a picture of planet Saturn.
how do i build this effect. I have tried the warp and transform tool, fine but getting the efffect that the ring goes around the back, comes out the other side is proving some what difficult.
how do I make the ring hide around the back of the globe??? I also have tried different layer and moving them about.
i want to make a golden ring in photoshop i m new at designing create a golden ring and further tell me how cani fix this ring around a map of a continent
View 1 Replies View RelatedIf we create a 3d ring and choose diffuse > new texture, the text is repeated several times.
I have attached a sample image. I want to see the word "HELLO" only once. How do I do this ?
how the ring wear that makes it look like an old vinyl record sleeve that has the shape of the record worn through was simulated on the record cover below?
View 2 Replies View Relatedhow the ring wear that makes it look like an old vinyl record sleeve that has the shape of the record worn through was simulated on the record cover below?
View 3 Replies View Relatedi want to make a peper effect binded with the ring.
View 9 Replies View RelatedI submitted the only picture I have of my sister wearing her wedding ring. I needed a good picture because she lost her ring. Endless hours of searching the internet, for something similiar proved unfruitful. Several guys on this forum took the time to blow up the photo, however my computer crashed and I do not have the pictures anymore.
View 37 Replies View RelatedI am trying to create this shape, but have it so it is scalable for a logo image. I have tried making various ellipses and putting them on top of each other, then skewing them and going back to trim out the "tails" of the rings. It never seems to come out clean, and the top edges of the rings always seem square rather than rounded.
Does anyone know of a better approach to this. I apologize if there is already a tutorial or thread on this, I searched, but didnt find anything on my own. I would be using it for both print and web.
At tut "Multi-Layered Ring effect", step 4 we find this paragraph:
"Rename this channel to bevel. Once you have renamed the channel to bevel go to Filter/Blur/Guassian Blur and choose a value of 8. Then Guassian Blur it again with a value of 5, and one more time with a value of 1."
Why can't we put a bigger value to the gaussian blur effect, instead of repeating it three times with differents values? If i put 14 for the Gaussian value once, isn't it return with the same effect?
I'm trying to "bend" an image (or text) into a ring. I'm not talking about simply having the text follow a circular path, but rather more like the filmstrip on Apple's new dotMac logo,
How did they get the items - like the video frames in particular - to "wrap" around the globe like that? Perhaps Photoshop is not the right tool? I've seen this same effect with text and other images on various site, and I've always assumed it was done in Photoshop.
i'm learning the tut "Creating a Multi-Layered Ring effect", then when i've got at step "5", i had some problem, it tells us to "ctrl click" layer alpha1 at channels window, then go back to layer window and keep selected ring1 layer, but it doesnt work, cause i can't keep both layers selected, when i go to the apply lightning effects and change all the values to those mentioned at the tut, all i have back is a dark image, nothing alike to that one at the tut.
View 2 Replies View RelatedHow do I draw a circular ring around an object in PSE 11 ?
View 3 Replies View RelatedAfter many interruptions and a few delays here is the tutorial for the gold rings! I have also attached a .xar file that contains some starting shapes and named colors!
View 9 Replies View RelatedI want to make a ring of polygons on the outside of a polygon-like the inset function when you get to >=2, but without all of the twisted polygons beneath it. Is there a way to do this using a tool, or do I have to manually add them myself?
I can make the larger radii on the connection pieces. Untwisting the polygon (rotating it -180) and then extruding/hinging works, however is there an easier way than that?
I want to draw a pattern for a crochet hat. The first thing I need to do is draw a ring of 7 chain stitches. I downloaded a font that makes crochet stitches, the one I would be using for the chain is an oval. I typed in the 7 stitches and adjusted the spacing so that they touched and tried putting the text on a circle. But I couldn't get a contiguous chain. I tried a brush, but that would not fit round the circle.
View 8 Replies View RelatedI made an API-spec 10K cross, 7 1/16" x 2 1/16". I got everything done including the passages and boltholes for the studs. But I need to cut grooves for the BX ring gaskets. It is basically a block of steel with two different size holes through the center with bolt circles (and ring gasket groove) at each opening. I am still a bit of a beginner and I am stumped on this one problem. If it were AutoCAD I would have cranked out the solid model in about 15 minutes (or less if in a hurry) but I want to learn Inventor.
Inventor 2013, Windows 7
I'm missing the Center Pin, Ellipse, Feather Handle and the Focus Ring when I select the Iris Blur filter. The pointer is a tack symbol and am unable to change that.
View 5 Replies View RelatedI was trying to extrude a ring formed by two circles with vb.net for a part.
Think I need define the profile with sketch block. If there any sample code shows how to use it? Is there a website like the autocad.net where I can get the sample for the api?
I started to model up a lifting cradle but do not know how to progress further.I attached a 2013 version of model done so far. How can i place 4 chains on the top bracket to a ring?
View 7 Replies View RelatedI need to dels a ring in concave shape. Its very easy to do it in 3D model in flat shape but how do I do it in Concave form?
View 9 Replies View RelatedHow to do a text warp like the top of a class ring similar to this image.
I have tried to work with the mesh envelope tool, but the letters get all distorted and don't run evenly around the corner. I can't seem to get a nice consistent look like this.
I am trying to add a shadow effect for dimension to just a section of the edge on the inside of a circular ring. Is there a way to make a drop shadow do this on the inside? Or do I need to look at some other technique?
View 8 Replies View RelatedI am trying to calculate flex on a metal ring I have designed and are a bit confused with the contacts that I am getting when using automatic contacts.
Please see the pictures attached for reference.
When I use automatic contacts I get all bonded contacts, but I get the impression that bonded contacts are welded and that is not the case with my design it is bonded using bolts.
Which contacts would you use for this part? Or should I simplify it? Can I run it in the stress simulator?
how can I paint a rope that goes throug a ring?
My rope is always behind the ring....
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Relatedwhen I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?