I want to draw a pattern for a crochet hat. The first thing I need to do is draw a ring of 7 chain stitches. I downloaded a font that makes crochet stitches, the one I would be using for the chain is an oval. I typed in the 7 stitches and adjusted the spacing so that they touched and tried putting the text on a circle. But I couldn't get a contiguous chain. I tried a brush, but that would not fit round the circle.
View 8 RepliesAfter many interruptions and a few delays here is the tutorial for the gold rings! I have also attached a .xar file that contains some starting shapes and named colors!
View 9 Replies View RelatedI prepared 32 pages for a magazine. They are all prepared as single pages in Corel Draw X6. Now I would like to check the end result like it would look if I would hold the magazine in my hands. That means that the following pages should be displayed at once on the screen:
1 (cover)
2 + 3 (together)
4 + 5 (together)
...
30 + 31 (together)
32 (back cover)
Is there any way to perform a series of keystrokes using a single short-cut key?
View 9 Replies View RelatedI'm working on something where I had the text conform to a curve. Now I would like to make the curve path in visible, and I was able to search for instructions on how to do that except that I'm finding them mystifying. I read "you can select a single item inside a group with Ctrl click," but when I go to the group in the layers gallery, the text and curve are treated as one item, and I see no way to separate the two.
View 8 Replies View RelatedI know I saw a video on how to do it from scratch, but I dont remember now. Why does it update all the images in a row? and how do I just update 1? place it on a new layer?
View 2 Replies View Relatedis there any way of making one object appear in multiple places?
The problem is that we are designing some objects (call them "buttons") whose design we have not finalized how they will look yet.
i.e. The shape, size, layout of components of these buttons is still undecided, although we know that they will be in use in a large number of places (on a large number of pages).
So what I want is to have a single master copy of the object that I can edit in one place, and for those changes to ripple out across multiple places on multiple pages.
P.S. I thought Edit ==> Clone Shape would do this, but it appears to create separate, un-linked copies. In fact all it seems to do is in effect the same as Control/C and then Control/Shift/V!
What and where I can select/deselect to avoid saving as PDF as a single file per each page?
Currently have names like 1Page001.Layer 1.pdf etc... (the name in the Export dialog is 1.pdf)
I am having difficulty creating the attached 3D business models in vector and struggling with the perspective and angles, both are proving challenging. I initially started by creating a cross hatch grid and rotating it 45 degrees but its not looking right.
View 3 Replies View RelatedThe outline of this small fish drawing on paper, it seems with one continuous curve, so in XDPX9 that should be logically with Smooth joins and Making curves
Smooth_join.xar
According to your experience is there maybe some tactic where to put the control handle points? At the curves or rather where the line is straight? After around some minutes probably in any way can be drew around, I am searching the logic rather which decrease that time.
I'm trying to make text like this "Now Is The" to look like this
N
o
w
I
s
T
h
e
I tried putting the text on a line and pulling to vertical that didn't work. I tried a vertical line hoping that it would follow that (It didn't).
I'm using DPro7 and am having trouble making a bitmap copy of an object, with a 3 colour linear fill, each time I get a serious error message box.It works OK with a 2 colour fill,
View 5 Replies View RelatedBeen working on this one for a while. Tried some searching on the site here, but I just haven't found a good solution for my needs.
I have rounded logo for my business. I like to paste it into emails and some marketing materials in either a jpeg or png format. The problem is the background of the page keeps showing up in the export file. Any quick solutions to this? I have pasted a copy of it in the text here.
I cannot seem to find a fnction in Designer Pro X for making tables. Is there one in there somewhere? or not?
View 4 Replies View RelatedI am trying to make a 3d ring for my logo but not getting the desired result. There is loads of zig-zag surrounding the ring. Following are the details how I did that.
1. Ellipse Marquee Selection.
2. Ring1, Edit stroke filll, 9 px center
3. Applied inner bevel and drop shadow
I've got a picture of a ring lying on a surface (3D pic).
I'd like to make some text so it looks like it's on the ring, encircling it. How do I do that? I've tried all the free transform functions, no results.
I am trying to create a ring like the one below. This one is scanned from a business card and is not very clean. I want to make a high resolution image that I can wrap around a sphere using about the same angle.
I have played around with the Ellipse tool and then tried to skew or distort the image, but I am having the most trouble with the two places the ring is broken and comes to a point.
I have a picture of the erath, (globe). I am wanting to make a ring like staurn, so when you look at the globe, the ring will follow a curve, go around the back of the globe and then come out around the other side and join up. Basically as you see in a picture of planet Saturn.
how do i build this effect. I have tried the warp and transform tool, fine but getting the efffect that the ring goes around the back, comes out the other side is proving some what difficult.
how do I make the ring hide around the back of the globe??? I also have tried different layer and moving them about.
i want to make a golden ring in photoshop i m new at designing create a golden ring and further tell me how cani fix this ring around a map of a continent
View 1 Replies View RelatedIf we create a 3d ring and choose diffuse > new texture, the text is repeated several times.
I have attached a sample image. I want to see the word "HELLO" only once. How do I do this ?
how the ring wear that makes it look like an old vinyl record sleeve that has the shape of the record worn through was simulated on the record cover below?
View 2 Replies View Relatedhow the ring wear that makes it look like an old vinyl record sleeve that has the shape of the record worn through was simulated on the record cover below?
View 3 Replies View Relatedi want to make a peper effect binded with the ring.
View 9 Replies View RelatedI submitted the only picture I have of my sister wearing her wedding ring. I needed a good picture because she lost her ring. Endless hours of searching the internet, for something similiar proved unfruitful. Several guys on this forum took the time to blow up the photo, however my computer crashed and I do not have the pictures anymore.
View 37 Replies View RelatedI want to make a ring of polygons on the outside of a polygon-like the inset function when you get to >=2, but without all of the twisted polygons beneath it. Is there a way to do this using a tool, or do I have to manually add them myself?
I can make the larger radii on the connection pieces. Untwisting the polygon (rotating it -180) and then extruding/hinging works, however is there an easier way than that?
I would like to know how to change the colour of a single layered, single coloured gradient (foreground to transparent) image. There is nothing more to it than that other than I don't want to use the hue/saturation adjustment as it's hard to get a specific colour.
View 7 Replies View RelatedI am trying to create this shape, but have it so it is scalable for a logo image. I have tried making various ellipses and putting them on top of each other, then skewing them and going back to trim out the "tails" of the rings. It never seems to come out clean, and the top edges of the rings always seem square rather than rounded.
Does anyone know of a better approach to this. I apologize if there is already a tutorial or thread on this, I searched, but didnt find anything on my own. I would be using it for both print and web.
At tut "Multi-Layered Ring effect", step 4 we find this paragraph:
"Rename this channel to bevel. Once you have renamed the channel to bevel go to Filter/Blur/Guassian Blur and choose a value of 8. Then Guassian Blur it again with a value of 5, and one more time with a value of 1."
Why can't we put a bigger value to the gaussian blur effect, instead of repeating it three times with differents values? If i put 14 for the Gaussian value once, isn't it return with the same effect?
I'm trying to "bend" an image (or text) into a ring. I'm not talking about simply having the text follow a circular path, but rather more like the filmstrip on Apple's new dotMac logo,
How did they get the items - like the video frames in particular - to "wrap" around the globe like that? Perhaps Photoshop is not the right tool? I've seen this same effect with text and other images on various site, and I've always assumed it was done in Photoshop.
I made an API-spec 10K cross, 7 1/16" x 2 1/16". I got everything done including the passages and boltholes for the studs. But I need to cut grooves for the BX ring gaskets. It is basically a block of steel with two different size holes through the center with bolt circles (and ring gasket groove) at each opening. I am still a bit of a beginner and I am stumped on this one problem. If it were AutoCAD I would have cranked out the solid model in about 15 minutes (or less if in a hurry) but I want to learn Inventor.
Inventor 2013, Windows 7
I was trying to extrude a ring formed by two circles with vb.net for a part.
Think I need define the profile with sketch block. If there any sample code shows how to use it? Is there a website like the autocad.net where I can get the sample for the api?