I know I saw a video on how to do it from scratch, but I dont remember now. Why does it update all the images in a row? and how do I just update 1? place it on a new layer?
View 2 RepliesI have a screenshot, which I have cropped to a specific area to show a specific part of a window: a shape with a bitmap fill, or a cropped bitmap whichever way you consider it.
Next I have another screenshot, of exactly the same dimensions, showing the same window - but showing that window in a different state.
Both screenshots are bitmaps in my document, both appear in the Bitmap Gallery.
I'm not sure if something changed in recent versions of Xara, or I have forgotten the drag+key combination, but how can I drag the second bitmap onto a copy of the first bitmap-filled shape so that the SAME part of the bitmap is shown?
Using different combinations of SHIFT and CTRL I seem to be able to replace all instances of the first bitmap with the second: It is scary that a shape with a bitmap fill offscreen or on another page can be changed unwittingly!
I have a low-res bitmap. It has a dark grey background with a plain white icon. The transitional pixels are various shades of grey.
I want to make the dark grey into a bright blue, leave the white white, and have the transitional pixels changed to maintain their respective "in between" values.
I do have Photoshop CS2 but I though Xara was more likely to be able to do this.
If I have a bitmap image that has been cropped to an irregular shape (say a star or pear etc) is there any way in CorelDraw to replace the image without having to crop and position the bitmap all over again. I thought It would be as simple as clicking edit bitmap & pasting the new image once in corel photo paint but that does not seem to be the case.
edit: also is it possible to swap the image with a higher resolution version.
I have clipped a photo to remove the background and now want to replace one of the images in a website gallery. I know I can delete the original image and replace it but is there a way I can drag my new picture over the old one and replace it like I can when I drag an image from the Bitmap Gallery?
I presume it isn't possible as the original image is a square or rectangle that is filled with the bitmap and the clipped image is an irregular shape.
I am using XDP 6
In a layout for an ebook I have some important black and white bitmap illustrations in tiff., 300 dpi. These have appeared ok on print, but on screen, reading the same pdf-file, they're unacceptable, especially some texts in fontsize 5-6 pt are unclear. I have to convert the drawings, or at least the texts, to vector graphics. Can I open these tiff.s in Photoshop, change only the texts to vector graphics and then save in a format, that can be inserted in the Word2010 layout?
View 2 Replies View RelatedI am currently attempting to fill a 3-D bit of text with a bitmap of stars that I had designed. I believe I made those stars in Pshop. Right, so I want to fill the interior of this word with the said stars, but I really haven't become accustomed to the process of gettting those mapped in there.
View 1 Replies View RelatedHow do I get rid of a "Locked Bitmap Effect" in a layer ? I can't seem to delete it.
View 4 Replies View RelatedSometimesw you want to color the fill of a bitmap without the fuss of opening another app. For example, Bitmap files in corel color differently. Is there an equivalent to this in Xara?
View 4 Replies View RelatedI can't I never tried out the bitmap fill tool until now lol. I was wondering if there are sites that you can get fills and add them into to Xara, I have tried a few texture files, but for what ever reason Xara does not find them when I load the directory (disk fills...)
View 7 Replies View Relatedopened the DesignerProX and wanted to work normally. Recognized that any bitmap I do import (neither via drag n`drop or via bitmap galerie ) I can no longer move or resize with in grapmode. Only using the arrow keys. Instead whenever I grap the bitmap with the mouse it shows view extract.
In any case, I am sure there is something I made in the set-up and not generally wrong in the software.But which "button" do I need to "turn" to get the original set-up back?
Background.
About five years ago I had to prepare a series of cave maps and one of the caves was in granite. I needed to have the geological symbol for granite as a fill for use in the various cross sections. OK. I made the fill (a random scattering of "V"s) and used it. And kept the file, lets call it A.
Switch to now. I am making a map of an arch that I explored last year. The map is almost finished and I need the fill again. This is map B.
My question is how to I get the fill out of map A so as I can use it in Map B?
I know the answer is possibly very simple but not obvious to me. I have tried a workaround which involved importing the whole map A into Map B and then removing the original. This worked but seems really kludgy.
I was checking out this tutorial on wrapping a bitmap around a sphere, and I downloaded the referenced filters. The filters did not seem to work. The spherical mould tool seems not to work for me either.
View 4 Replies View RelatedHow can I square up a bitmap that has one end larger than the other?
View 9 Replies View RelatedMy question is about vector argument, I've heard a lot of times that vector is better to big drawings and also the same doubt comes to my mind ...
Many and many times We have to convert shapes to bitmap due to CPU issues when We use blends, etc, that is to say, We draw vectorial but We are limited if We push xara to the limits.
The other doubt is, what happens when we use fills, for instance the ones that come with xara, aren't they bitmaps?, will they looks as sharp as We want when we use them in large drawings?.
What happens with transparencies?, are they vector?, what about shadow tool?.
I have shape with a 'single tile' bitmap fill and the bitmap is smaller than the shape (which is what I need) but I want the fill of the shape not taken up with the bitmap to be white, however this is defaulting to transparent. I've gotten around this by cloning the shape, setting the fill to flat white and placing it behind the original (bitmap filled) shape. This works fine but is there a way to do this without resorting to this second copy?
View 4 Replies View RelatedI would like to know how to change the colour of a single layered, single coloured gradient (foreground to transparent) image. There is nothing more to it than that other than I don't want to use the hue/saturation adjustment as it's hard to get a specific colour.
View 7 Replies View RelatedI am just trying the Bitmap Tracer tool in XDP7, actually would like only on a part of a picture.
For this clipped that actual part in Clip tool, so in the document only that one can be seen. But in Bitmap Tracer seems that always the whole image analised, how to "real" clip from the picture?
I have a clear black and white bitmap which I am trying to vectorise using the bitmap tracer tool under utilities, i have tried tweaking the settings to so many different combinations but it still traces it with jagged edges and it's not very 'clean' as opposed to the original image. it's a black and white drawing with definitive shapes.
View 7 Replies View RelatedI would like to get a special border effect on my image. It should get a kind of frayed border. With one of my filters, I can get such effect, but only with included white background. But I need it without background, just like if cropped. Is there any way to get that effect?
(I use version Designer 7, but try out ver. 9 now)
I'm using DPro7 and am having trouble making a bitmap copy of an object, with a 3 colour linear fill, each time I get a serious error message box.It works OK with a 2 colour fill,
View 5 Replies View RelatedI make simple line drawings for my work but I also use some photographic models too. I was trying to figure out how to use the bitmap tracer to get a better vector line drawing for my patterns.
View 1 Replies View RelatedWhen I try (by setting a line colour), transparency isn't taken into account.
View 8 Replies View RelatedIt's not a biggy or even a buggy.
But where has the rightclick>replace bitmap function gone?
Now one needs to go through the menu>import and adding through the bitmap gallery or fill gallery adding a folder again.
For me dragging from win explorer doesn't work.
At least not adding it to an object,only adding a new photo to the page
how to use PNG with transparency as "photo frame" for bitmap (photo) in Xara Xtreme Pro v5?
I'm try to design pages for photo book in Xtreme. I have set of files in PNG format as "frames" for photos. For example, I attach one (14_v.png) to this message. In another editor I can use them as "masks" for photos - in second attach (capture.png) you can see on left - usual photo, on right - photo with mask as photo frame. How I can make same effect in Xara Xtreme? I try to use different modes, substract/add shapes and other - but no luck.
How do I turn a bitmap into editable shapes in Xara Designer Pro X. i.e. In my case have a screenshot of an website, and I want to get Xara to intelligently turn it into editable shapes so that I can do clean experiments on changing the colours of different areas etc. I remember that there used to be a tool about 4 years ago in a previous version of Xara but I can't find it.
View 7 Replies View RelatedHow can I scale a bitmap so that the pixels stay squared?
By default Xara Designer Pro interpolates pixels.
Is there a way to have the bitmap fill of an object stretch a skew with the object as the handles are moved?
View 1 Replies View RelatedI don't know if it is the update or not but every time I fill a rectangle with noise and create a bitmap copy and try to erase the white with Medhi eraser classic XP&GD and XDPX now stops working. I have tried this over and over with the same result, or should I say lack of a result? All I am trying to do is make a star field. This is the same basic method I used before to create animated snow..
View 7 Replies View RelatedShould be a simple question. Using Designer Pro X I load a PNG file. I then do nothing except "save as" also in PNG format.
My expectation was I would get the same file. Instead it seems to have changed the resolution and now looks terrible.
An ordinary graphic program like paint.net or photoshop would save the same file back to disk.
There must be something I am failing to understand about Xara. How do I edit a bitmap and have it save back in its original resolution?
I am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View Related