AutoCAD Inventor :: Copying CC Parts To Custom CC Folder
Apr 4, 2013
how to copy parts from the existing CC to newly created custom folders within the CC. We are now just starting to look into which parts we want to be in our custom folders moving forward.
Once we copy them over, the plan is to change the descriptions and possibly some dimension values. Because we are in the early stages of revamping our companies part number scheme the thought was to keep the out of the box P/N's currently showing in the family table of these parts. Some of these parts have already been used as "Standard" (not custom) from out of the box in the CC and these said parts have already been checked into the vault. If we are not changing the part numbers in the copied parts family table, is this going to create errors when checking these copied parts into the vault? Part of me is saying I am going to get the "This part already exists in the Vault" error message being they are standard parts But, the other part of me says technically they are different so maybe this wont be an issue. I am looking for confirmation of this.
I also would like to know if it is possible, when you have two separate custom folders in the CC can you copy the same component into both folders changing only slight things.
Inventor Suite 2012
Windows 7 Professional
Intel (R) Xeon (R) CPU 3.47 GHz
12.0 GB Memory, 64 bit OS
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014 Inventor 2014, Vault 2014 HP Workstation Z220 Intel Xeon 3.4GHz 16GB RAM Nvidia Quadro 4000 Windows 7 Professional (64bit)
When I make a drawing, often times page 1 will be the entire assembly and in subsequent pages (sheets), I will dimension each individual component, etc. In the "Name" field in my title block, I have it grabbing the "Title" and "Subject" iProperties. Just so happens, those fields are ALWAYS the same for each part as it is for the assembly.
What is the best way I can either
A) AUTOMATICALLY copy the "Title" and "Subject" iProperty fields from the assembly to EACH part that makes it up
or even BETTER
B) AUTOMATICALLY copy the "Title" and "Subject" information from sheet 1 to the same place on all subsequent sheets
Or BEST
C) Have the title block template pull that data from the assembly, EVEN IF only a singloe part is on the sheet.
How to copy an IAM & several parts to another folder (I created a new project folder for them) using DA without messing up the original file structure. I'd like to change the new IAM file name & only several of the parts that are not common to the original (Stand alone environment, no network).
When I drag parts in the browser to a folder I created half the time they end up just above. I always wait for the folder to highlight blue before dropping but why don't part go there as requested all the time?
Is this a step up on my station, precision of the cursor? My colleagues don't seem to have this problem but we can't see any differences in our step up except I use a different mouse.
I have a script that is perfectly works in 2012 inventor pro version. It moves newly added virtual parts into the VIRTUAL_PARTS folder. Part of script is below:
Dim oFolder As BrowserFolder Dim oTopNode As BrowserNode oTopNode = oPane.TopNode() Dim oTopNodeOcc As BrowserFoldersEnumerator oTopNodeOcc = oTopNode.BrowserFolders For Each oFolder In oTopNode.BrowserFolders i = i + 1 Next If i = 0 Then oFolder = oPane.AddBrowserFolder("VIRTUAL_PARTS", oOccurrenceNodes) Else For Each oFolder In oTopNode.BrowserFolders If oFolder.Name = "VIRTUAL_PARTS" Then For Each oOcc In oAsmCompDef.Occurrences If TypeOf oOcc.Definition Is VirtualComponentDefinition Then oNode = oPane.GetBrowserNodeFromObject(oOcc) End If 'MsgBox(oTopNodeOcc(1).Name) oTopNodeOcc(1).Add(oNode) Next Else ' do nothing End If Next End If
In 2014 pro it works only once, when I add first virtual part. It creates a folder and moves it there. When I add 2nd virtual part it gives me a error
I often want to copy a design (assembly plus used parts) to some other folder as a quick start for some derived work. I want to be able to work on this copy without influencing the original and visa versa.
The problem is when copying with the windows copy command, the references to the parts point to the original folder. I read that you can use the Copy feature of the Vault for this. But I'm not using the Vault and don't want to.
Pack and Go is also not a good solution because it copies a lot of other stuff and makes a new project file. How can I do this. It seems so a simple operation. But I can not figure out how to do that!
Within my InventorAddin in vb.net we are trying to force users to a particular folder when they save 3D Parts, Drawings etc.
This 'SaveAs' form does indeed fire, but after the 'Inventor' own 'SaveAs' form window. Can we suppress 'Inventors' window or even change that so it points to our preferred location.?
If we do not do this we are goinf to have 3D Drawings in the Parts folder etc etc.
PrivateSub applicationEvents_OnSaveDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnSaveDocument If iApplication.ActiveEditDocument.FileSaveCounter = 0 Then
When inserting parts from CC, by default As Standard is chosen, but I always need As Custom, so I can choose where to place the files. Is it possible to make As Custom default option?
I am looking for a way to miter two pieces of rectangular hollow section.
I have placed the parts from the content center as custom parts, now I am looking for a way to perform a miter on the them where they intersect.
I am aware I can perform the miter if the sections had been created through frame generator but I was wondering if miter could be used outside the fg environment.
I've created a folder on our server that contains commonly used parts by several users. My thought was that by referencing this folder as library in their projects, they wouldn't be able to change the parts. I could also build assemblies referencing these common parts so they wouldn't have to be copied into each project folder...
During the save option in their assemblies, the parts show up as NO (in a library), but this can be bypassed by "YES TO ALL".Is this not the right process for setting up a custom part library?Also, the users are experiencing some lag issues... Could this be the reason?
I have a lot of custom libraries for purchased items for my projects. When I bring them into my assemblies I cannot turn on or off surface planes or make any changes.
I get the message that the file is not checked out to me. How can I make it so they are always checked out to me. The libraries are mine on my system.
I am trying to add a custom iProperty from my assembly to the drawing parts list. According to the help wiki, I'm supposed to click Column Chooser > New Property > Custom Properties List (click here to see the relevant wiki page--also see the attached screenshot called Custom Property Help.png).
When I click on new property, there is nothing about Custom Properties List.
I have created a custom library (custom content center), and that went fine. All I done was copy a family of RHS from the desktop content center into my custom content library. I then created a small test assembly with frame generator to see if I could use my custom library. It worked fine BUT when I place it into a drawing and create the parts list, the parts list shows all the info in an order that is no use to me. (see attached *SNIP A*)
What I would like is that when I use frame generator along with my custom library, then take it into a drawing, the parts list needs to look like the attached file (see attached *SNIP B*).
So really, I want the "Unit QTY" to vanish, I want the "QTY" to show the Quantity of that part within the assembly, I want the "stock Number" to vanish and I want the description to show the size of the member (what the "stock number" currently shows) along with the length of the member.
Now I know I can edit all this for each part within the parts list BUT I need the parts list to show this info EVERY time AND automatically.
I'm having a bit of trouble creating a new parts list style. I really want to have two styles to choose from in all three of my .idw templates. I understand how to create them but I can't save them to the library.
Inventor 2013 Windows 7 Professional 64-bit SP1 HP EliteBook 8470w Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz Memory: 16 GB AMD FirePro M2000 3D Connexion SpacePilot
I go to the Parts List, Insert a Custom Part, click Apply, Click Ok and nothing shows up. I go back in to Edit the Parts List and the Custom Part is not there at all.
When inserting a Content Center part into an assembly as a custom part instead of as a standard one, then opening and modifying the part, the thumbnail for the new file is not updating to show the modifications. In this particular instance: a pipe blind flange with an off-center hole drilled through the face. The thumbnail still shows as the original (and fairly pixelated) CC blind flange. forcing the thumbnail to update?
redirecting T&P and Frame Gen parts and assemblies to custom folders, changing folder structure from default to custom.I find default folder structure too complicated and want to simplify it.Also, when copying design, I get a message about folder paths being to long and I am unable to execute Copy Design.
when i create an ipart with an custom parameter column, the files are created in the workspace. Is there any way how i can change this location?
Many parts are piling up in the workspace.For example to the library (like "normal iparts" do) or to a folder in the workspace (workspace/ custom_ ipart_ folder)?
I am working with several drawings that were created, I believe, using Inventor 2011. I am currently using Inventor 2013. I noticed some views do not show the outlines of custom parts created using Content Center. And it's only some of the parts within the view. The outlines of parts created the same way show up correctly. The B.O.M. structures for the parts are set to Normal. I toyed with the Drawing View Settings' Display Options with no avail. When the Drawing View is set to Hidden Lines Removed, the part doesn't appear at all. When I select the shaded option, the part appears, but there is still no outline.
Along similar lines (no pun intended), sometimes the outline extends beyond the actual part location. For example, a pipe that is 24 inches will show up in the drawing view as 72 inches. When the shaded option is selected, the part appears correctly, but the outline extends beyond the shaded area.
I am trying to create/publish custom shapes into Content Centre and for use in Frame Generator. I can create the i-Part and configure the parameters I want to enable different sizes - no problem. However when I go to "Publish Part" ()
I get the following error.......
do I need to save the ipt file in a different location? What dependencies are there? I get the same result if I follow the Inventor tutorial using the brace.ipt part....
I want to create a rule with CommandManager.pick who see the name of assembly and send a custom ipropertie to all parts of this assembly view in drawing, this is my none finish rule.
Dim doc = ThisApplication.ActiveDocument Dim entity = ThisApplication.CommandManager.Pick( SelectionFilterEnum.kDrawingViewFilter, "SÉLECTIONNE UNE VUE") modelName = IO.Path.GetFileName(ActiveSheet.View(entity.Name).ModelDocument.FullFileName) PART = Left(modelName, 11) EXT = Right(modelName, 3) FIRST = Left(modelName, 3)
[code]....
I have the rule "SEND TO PARTS" in my assembly but i have this error message
MEMBER NOT FOUND. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND))
We are copying our original files to a sub folder to make revisions that have only happened after bidding. We want to keep our original bid documents intact. I have created a sub folder called 'Confirmed Documents' and added Constructs, Sheets, Elements, etc.
I copied the files over and used the Reference Manager to repath the files. However, all of my schedules and room tags now use the 'NA' prefix because it is not reading the project information. How can i reconnect this folder to the project folder?
We are copying our original files to a sub folder to make revisions that have only happened after bidding. We want to keep our original bid documents intact. I have created a sub folder called 'Conformed Documents' and added Constructs, Sheets, Elements, ect.
I copied the files over and used the Reference Manager to repath the files. However, all of my schedules and room tags now use the 'NA' prefix because it is not reading the project information. How can i reconnect this folder to the project folder?
