when i create an ipart with an custom parameter column, the files are created in the workspace. Is there any way how i can change this location?
Many parts are piling up in the workspace.For example to the library (like "normal iparts" do) or to a folder in the workspace (workspace/ custom_ ipart_ folder)?
I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
When I place a custom ipart (a simple one in this case) the length in my table changes
Inventor Professional 2014.
Windows 7 64 bit.
In a simple case I have an extrusion with some attached seals/weather stripping, all implemented as iParts having their own LENGTH parameters.
RailPart.ipt, Seal_A.ipt, Seal_B.ipt
The goal is to encapsulate these IParts within an iAssembly: RailAssy.iam, where a LENGTH parameter can be input when the iAssembly is placed, causing RailPart and Seal_A to have their length parameters set to the LENGTH provided at that time and SEAL_B having Length set by an iLogic rule to LENGTH - 5.
I've been unable to set up a Custom Parameter Column in an iAssembly table. Is this even permitted?
Inventor Premium 2012 SP1
I am having trouble with mass prop exporting to sheemetal parts. It did work for 2012 now its not happening iv2013. service pak 1.1
View 1 Replies View RelatedI would like to know if there is a way to have the Schedule as an I-Part parameter of a flange. I'm trying to create a custom flange for use in the content center and would like both size and ID to be picked from a drop down when placed into an assembly.
Since it's a flange not a pipe I can't use the standard tube & pipe authoring method.
I am trying to make an iPart of a fitting where I can change the "Body type" and it will change all the parameters associated with that body type through iLogic. Really I am just playing around in iLogic to see if this is something worth learning. Back to the point, I would like to change a multi-value user text parameter through the iPart table but I cannot find the paramter in the parameters tab.
Since it is a user parameter I thought it would be in the "Other" folder but it isn't. I do however have the other multi-value user number parameter in that folder, which makes me think that maybe I can't use the paramter in the iParts table?
INV 2012 SP1
Windows 7 64 Bit
ATI FirePro V5800
14.0 GB RAM
I've created a main assembly containing several ipart components. With the following rule I can read the model parameters, but not the user parameters of the iparts:
A = Parameter("Part1:1", "d0")
If I create a component, insert it in the main assembly and make it an ipart afterwards, the user parameters can be read out with ilogic. But if I insert the same ipart again, the user parameters can not be read out anymore. Model parameters are no problem.
I have a custom iPart for a rectangular flat bar that's 100x10mm. The length is the custom field.
I would like the description in the BOM to append the length, e.g. 100x10 Flat bar-235mm. (This is so that I don't have to create a length column in the BOM just for this item).
I have tried 100x10 Flat bar - <length> but this gives an error.
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
I am having difficulty adding two new rows to an iPart I made and published previously. Is there a way to do this without using the API?
Since it's a custom iPart not a standard CC part I would have thought this would be fairly straightforward but I can't work it out.
I have a part that was derived from an assembly. However now I need to make this part have different center dimensions. Is there a way to make a derived part into an iPart without creating more parts? see attachment.
I am using Inventor 2012. BTW the part is more detailed than I am showing in the attachment.
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
it is possible to set the value of one or more "custom" column of an iPart row.
Per example woul this iLogic method work?
iPart.ChangeRow("iComponentName:1", "RowMemberName", customParam1, customParam2)
If so, could you demonstrate how to use it?
Is it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?
In that case I simply remove the previous occurrence and insert a new one I suppose?
I've got a custom VBA function that works perfectly when called from a parameter in my part.
However, when in the context of my assembly, there is no error, but the function no longer runs, and the parameter text is red.
Apparently, the function is no longer in context?
I've heard of external rules, but have never implemented one.
Is there a way to declare my function and keep it in context regardless?
Public Function BumpHeight(dblHeight As Double, dblMember As Double) As Double Dim X As Integer X = 2 If dblHeight > dblMember * 2 Then BumpHeight = dblHeight Else BumpHeight = dblMember * X End If BumpHeight = BumpHeight / 2.54 End Function
Here is the Parameter:
VBA:BumpHeight(ValanceBackBumpoutHeight;ValanceMemberSize) * 1 in
Update: (problem better defined)
What seems to be happening is that once I insert the part into an assembly, it creates a new blank copy of the parts' modules in VBA and the functions no longer work.
If I go to the VBA editor,
There are now two copies of my part listed in the browser tree, but the new one is blank.
If I paste in my function to the new one, it will work until I return to the parent assembly.
Next time I come back to the part, it will have a new blank set of modules.
This appears to continue indefinitely...
see the attached screenshot.
At this point there are only 2 copies of the DocumentProject. The original still contains my functions, but the new one is blank.
I need these functions to work in order to build my model.
Is it possible with iLogic code to set a parameter in a bunch of parts equal to another paramter?
I want some iLogic code that will go into my pipe parts and make the PL param = D2.
I need to assign the dimension in my screenshot to a parameter so I can use it to drive another assembly. However, I can't find any way to capture it in a usable manner.
In the screenshot I have an associative part inserted that contains only a sketch with the projected line and point that I wish to measure between, but the geometry in the sketch does not update when the model geometry changes. This seems to be normal behavior?
Inventor 2012.how would I input the total quantity of doors in the .iam in order to update the Parts List quantity column? I have a lot of user inputs in the .iam file set up to change width, height, etc that are based off of Parameters in the .iam, but I don't know how the user can enter assembly quantities in order to get the Parts List to update the Quantity column correctly?
I have attempted using custom iProperties but how to get it to display based off a user input Parameter.
Just installed 2013 Pro x64 and I'm doing a little testing. Using Tube and Pipe, I created a few mock pipe runs which are named according to a unique line number. When clicking on the Iproperties of any of these pipe runs, I can see that the value of model parameter "Part Number" now includes the name of the top level assembly and the line number, which is the name I assigned to the pipe run when I created it (see Fig 1 attached). Then in IDW I created a user defined symbol which contains text that I have directed to extract value of "part number" from the model properties, and fill in my symbol with that value (see Fig 2). The problem is, when I tag the pipe run with my custom symbol, the value in the symbol remains blank, instead of giving me the value of "part number". WHAT am I missing??
View 3 Replies View RelatedI would like to use a multi-list parameter in a form, that isn't a problem. However I want the selection to be copied to a custom parameter when the form closes. Is there anyway to fire a rule when the form closes or to add a multi-select list to a parameter, in a form?
View 2 Replies View RelatedAn application that will let me choose a group of Drawing files (.idw) and perform "Save Copy As" to a PDF format on them. The Filename of each Drawing should be extracted from a custom Parameter I embeded in the IDW file.
I know I can use the Task Manager with a virtual PDF Printer to create these files, but then the PDF Filename will equal the IDW Filename, and I want it to be derived from the custom parameter I prepared inside the drawings.
Where do I find the "Allow custom values" option for a multi list parameter expression?
View 2 Replies View RelatedWhen inserting parts from CC, by default As Standard is chosen, but I always need As Custom, so I can choose where to place the files. Is it possible to make As Custom default option?
View 2 Replies View RelatedI am looking for a way to miter two pieces of rectangular hollow section.
I have placed the parts from the content center as custom parts, now I am looking for a way to perform a miter on the them where they intersect.
I am aware I can perform the miter if the sections had been created through frame generator but I was wondering if miter could be used outside the fg environment.
I've created a folder on our server that contains commonly used parts by several users. My thought was that by referencing this folder as library in their projects, they wouldn't be able to change the parts. I could also build assemblies referencing these common parts so they wouldn't have to be copied into each project folder...
During the save option in their assemblies, the parts show up as NO (in a library), but this can be bypassed by "YES TO ALL".Is this not the right process for setting up a custom part library?Also, the users are experiencing some lag issues... Could this be the reason?
I have a lot of custom libraries for purchased items for my projects. When I bring them into my assemblies I cannot turn on or off surface planes or make any changes.
I get the message that the file is not checked out to me. How can I make it so they are always checked out to me. The libraries are mine on my system.
I am trying to add a custom iProperty from my assembly to the drawing parts list. According to the help wiki, I'm supposed to click Column Chooser > New Property > Custom Properties List (click here to see the relevant wiki page--also see the attached screenshot called Custom Property Help.png).
When I click on new property, there is nothing about Custom Properties List.
how to copy parts from the existing CC to newly created custom folders within the CC. We are now just starting to look into which parts we want to be in our custom folders moving forward.
Once we copy them over, the plan is to change the descriptions and possibly some dimension values. Because we are in the early stages of revamping our companies part number scheme the thought was to keep the out of the box P/N's currently showing in the family table of these parts. Some of these parts have already been used as "Standard" (not custom) from out of the box in the CC and these said parts have already been checked into the vault. If we are not changing the part numbers in the copied parts family table, is this going to create errors when checking these copied parts into the vault? Part of me is saying I am going to get the "This part already exists in the Vault" error message being they are standard parts But, the other part of me says technically they are different so maybe this wont be an issue. I am looking for confirmation of this.
I also would like to know if it is possible, when you have two separate custom folders in the CC can you copy the same component into both folders changing only slight things.
Inventor Suite 2012
Windows 7 Professional
Intel (R) Xeon (R) CPU 3.47 GHz
12.0 GB Memory, 64 bit OS
I have created a custom library (custom content center), and that went fine. All I done was copy a family of RHS from the desktop content center into my custom content library. I then created a small test assembly with frame generator to see if I could use my custom library. It worked fine BUT when I place it into a drawing and create the parts list, the parts list shows all the info in an order that is no use to me. (see attached *SNIP A*)
What I would like is that when I use frame generator along with my custom library, then take it into a drawing, the parts list needs to look like the attached file (see attached *SNIP B*).
So really, I want the "Unit QTY" to vanish, I want the "QTY" to show the Quantity of that part within the assembly, I want the "stock Number" to vanish and I want the description to show the size of the member (what the "stock number" currently shows) along with the length of the member.
Now I know I can edit all this for each part within the parts list BUT I need the parts list to show this info EVERY time AND automatically.